asterisk users - Jan 2004 - * and Cisco Gateways

Anybody on the list who implemented Cisco ATA + * + Cisco 2600?  I cannot get my
calls from ATA to terminate to the Cisco gateway via *.  I am not sure if it is
my hardware problem.  I'm getting the following "codec negotiation
problem" from Cisco.

23:39:08:  Unexpected VoIPCodec Type :g729br8
23:39:08:  Unexpected VoIPCodec Type :gsmefr


I appreciate any help I can get.  Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040108/75c7ec0e/attachment.htm

>Anybody on the list who implemented Cisco ATA + * + Cisco 2600?  I 
>cannot get my calls from ATA to terminate to the Cisco gateway via 
>*.  I am not sure if it is my hardware problem.  I'm getting the 
>following "codec negotiation problem" from Cisco.
>
>23:39:08:  Unexpected VoIPCodec Type :g729br8
>23:39:08:  Unexpected VoIPCodec Type :gsmefr
>
>
>I appreciate any help I can get.  Thanks.
Go into sip.conf, and add these lines to the SIP peer for your Cisco 2600:

disallow=all
allow=ulaw
allow=alaw


This will force G.711 codec usage, which may solve your problems 
though it will increase your bandwidth.

JT

Hi, Send me your * configuration u r using for troubleshooting this
problem.

Arslan.

-----Original Message-----
From: Jess Magnaye [mailto:jess@arretni.com] 
Sent: Friday, January 09, 2004 1:37 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] * and Cisco Gateways
Importance: High

That didn't work. I ran tcpdump and looks like looks like my Linux has
problems with its on-board Ethernet.  I'm getting the following error,
which
most likely is the reason for no audio.

14:40:57.628080 asterisk > cisco: icmp: asterisk udp port 13696
unreachable
[tos 0xd4]
14:40:58.275665 asterisk > cisco: icmp: asterisk udp port 13697
unreachable
[tos 0xc0]
14:40:58.622308 asterisk > cisco: icmp: asterisk udp port 13696
unreachable
[tos 0xd4]

I am now installing a new linux with (pci-ethernet) to load the *.  I
hope
when I'm done, things will go smoothly.



----- Original Message ----- 
From: "John Todd" <jtodd@loligo.com>
To: <asterisk-users@lists.digium.com>
Sent: Thursday, January 08, 2004 1:32 PM
Subject: Re: [Asterisk-Users] * and Cisco Gateways

> >Anybody on the list who implemented Cisco ATA + * + Cisco 2600?  I
> >cannot get my calls from ATA to terminate to the Cisco gateway via
> >*.  I am not sure if it is my hardware problem.  I'm getting the
> >following "codec negotiation problem" from Cisco.
> >
> >23:39:08:  Unexpected VoIPCodec Type :g729br8
> >23:39:08:  Unexpected VoIPCodec Type :gsmefr
> >
> >
> >I appreciate any help I can get.  Thanks.
>
> Go into sip.conf, and add these lines to the SIP peer for your Cisco
2600:
>
> disallow=all
> allow=ulaw
> allow=alaw
>
>
> This will force G.711 codec usage, which may solve your problems
> though it will increase your bandwidth.
>
> JT
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users