Then all you need is a cheap way to integrate SIP, h323, and all the other advanced features that * brings to the table.... -----Original Message----- From: James H. Thompson [mailto:jht@lj.net] Sent: Wed 1/7/2004 9:30 PM To: asterisk-users@lists.digium.com Cc: Subject: Re: [Asterisk-Users] RE: Inexpensive Analog Ports > 2 sipuras SPA2000, sold at 100USD each they have 2 FXS ports its like > cisco ata While this is certainly a step in the right direction, it needs to get cheaper to compete with existing solutions. For example if you were to configure a 6x24 (6 FXO ports, 24 FXS ports) Panasonic PBX with voice mail, it comes out to approx $48 per port including everything except the phones. The FXS ports support both ordinary analog phones and Panasonic system phones. Reference: http://www.twacomm.com/Catalog/Model_KX-TA624-5.htm Panasonic KX-TA624 PBX KX-TA624 System Unit $420 with 3 FXO and 8 FXS ports KX-TA62477-3 3x8 expansion $300 with 3 FXO and 8 FXS ports KX-TA62470-2 0x8 expansion $230 with 8 FXS ports KX-TVS50 2 port Voicemail $500 Total $1,450 with 6 FXO ports 24 FXS ports Total Ports 30 * Cost per port $48 * voice mail interconnect may use two of the ports Jim jht@lava.net _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/ms-tnef Size: 5110 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040107/fff555cf/attachment.bin