similar to: * and Cisco Gateways

Hi, I just setup my * with digium. I started testing voicemail first between atas, and i am not sure why it is not prompting me any when the call is not answered or if busy. i only get continuous ringback and the following message: asterisk*CLI> -- Executing Dial("SIP/6882332-1697", "SIP/5104112978|20|tr") in new stack -- Called 5104112978 --

Can someone on the list confirm if Asterisk can do g723 or g729? when connecting to provider? or it is only supporting g711? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040106/1d6c78cb/attachment.htm

I've done some reviewing of the archives for G729 and H323 experiences. The landscape of that query isn't pretty - lots of pleas for help, and nor do I see too many "answers." I have a pending bid that requires some data before I can implement * on this particular solution. My question is perhaps a slightly differently worded one than has been asked before, but it may be

----- Original Message ----- From: "Jess Magnaye" <jess@arretni.com> To: <wipe_out@users.sourceforge.net> Sent: Tuesday, January 06, 2004 3:19 PM Subject: Re: [Asterisk-Users] Pls confirm > Is the format "allow=g723.1" in sip.conf valid? > > somehow i cannot get it working to do g723 passthru. also, i've read that > doing g723 will disable

I am just wondering if this is normal. I have my * running for a week now and I'm still testing its interoperability with other voip provider (in sip using codecs other than g711). yesterday, i changed my linux's (RH9). and since the new ip i assigned is located on a different site, i have to shut it down and move it physically. after that, i cannot run my * anymore. i am getting this

Hello, I have 5 digium's g.729 codecs and succesfully register with asterisk, I have incomming call from my cisco AS5300 to Asterisk through IP. But Asterisk always use g711 ulaw instead of g.729. When I disable all other codecs other than g.729 in both cisco and asterisk, calls get dropped once connected. The codec list show on my cisco AS5300 for g.729 are: g729r8 g729br8 I suspect that

Hello, everyone. Right now, we are trying launch our own PBX system based on Asterisk(Fedora) with Cisco 2611. Cisco has 2 port FXO card installed on it. For testing, I have 2611 hooked into phone line with number of xxx-xxx-xxxx fine. (I'll call it F). Using softphone, I can dial in extension 1001 on asterisk, which should talk to cisco. After initial connection to Asterisk, I have try to

Hi to all, I got a Cisco 2651XM wired to an E1 PRI. What I want to do is to pass all incoming calls to my asterisk. This is my actual conf: http://pastebin.ca/270677 with this I'm able to call my number from outside, but the call stop on the 2600, infact I can hear the tone, but I'm not able to forward calls to my asterisk. Anyone got an idea of my errors? Thanks to all. -- .:FaberK:.

Hello, I'm trying to receive faxes with asterisk. My configuration is like this: PSTN fax -> ISDN -> Cisco router with VoIP module -> Asterisk When I try to send a fax from PSTN fax I got the standard fax signal, Asterisk starts rxfax application and then call ends and there is no tif anywhere. On the fax display there is still one message: Calling... Part of my extensions.conf:

I can smile now. I made my * work with my Cisco. Finally. First problem was Ethernet on my Linux. After installing * on a different machine, I got rid of that "icmp udp unreachable" error. My next problem was the call stays on on Cisco gateway, but the ATA drops it. I figured out it was my mistake on dialplan in extensions.conf --- (it took me a day to notice it.. damn!). my config

We appear to be having a problem with our asterisk setup. We have a cisco AS5300 with pri lines coming in and passing the calls onto asterisk then too the sip phones. the phone call from the sip phones (7960's) appears to be ok nice and clear including the user who has called in. but if your the user who has called in its all crackley sounds really bad when they speak. i believe this

I'm trying to get Asterisk to pass thru calls using the G729 codec. I've got a 7960 phone and my gateway is an AS5400. I got the following messages when debugging SIP (7778881000 is the 7960): WARNING[1872]: channel.c:2115 ast_channel_make_compatible: No path to translate from SIP/7778881000-2874(4) to SIP/as5400-35c1(256) WARNING[1872]: app_dial.c:1002 dial_exec: Had to drop call

Does anyone in here know how to setup auto negotiation between g729 and g711ulaw on a cisco 5400? I would imagine it would be the same on a 3660. The problem I am having is natively the call is setup for g729 however when the call is transferred to voicemail it uses ULAW so when the cisco tries to connect to the voice mail I get a SIP error that the codec couldn't be negotiated. I need

it just came to my mind, and i haven't done any researches yet if somebody tried this one with asterisk.. :) well just in case somebody or someone on the list aware, i appreciate any advise. in telco world, there's like 64kbps per channel and voice can be carried on a 16kbps channel. is it possible to configure asterisk to make 4 extensions (ATAs example), to call out using single FXO

Hello, I am trying to see what I need to do SIP to H323 using G.729. I have Oh323 and SIP working with G711 fine. If I have a SIP client configured to use G729 and H323 client also to G729, how many license should I need to buy from Digium. Many thanks SW

Job Description: Asterisk MySQL Support Engineer Fast Growing Global Telecoms Company requires a very experienced engineer who has a variety of skill levels. The role would suit someone who has worked at switch level and fully understands how calls are to be handled to and from a VoIP platform, using a MySQL data base. Must be able to understand and had experience in dealing with, CLI, PDD, ACD

Hi, I have a serious problem to configure Cisco AS5XXX and Asterisk , I trying to use asterisk for PSTN(A)----> Cisco AS5xxx ----> ASterisk---->PSTN(B) (No Nat, no Firewall) I hear (on the PSTN(A)) clearly what the other person is saying, but the other person (on the PSTN(B) side) hears nothing from PSTN(A). I use tcpdump for debug de rtp trafic, and ouput contains

Hello I have a 800 DID setup to dial into my Asterisk server and I'm wondering if it's possible to ID when it's a payphone or not? I suspect it's not since I'm getting calls from someone else's SIP or IAX box. If I had a digium card installed and connected to a couple lines would I be able to get this information and parse it? Thanks, Jess

Hello all. I have a simple barplot with sixteen different segments. When I plot my data, only five or six of the labels are showing in the x-axis. How do go get them all to show? Can I set them at a 45.degree angle? Thank you. Jess -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send

Hi everyone, Can anyone tell me if there's a command prompt on R1.5.0 Windows that will bring up the GUI dialog box that performs the same function as setwd() only interactively? I've hunted around, but can't seem to find anything. Something like file.choose(). Best wishes, Jess _____________________________________ Jess Mar Department of Mathematics University of Queensland QLD