If you have echo on the X100P's Mark setup chan_zap to pretrain the echo
can, but it had a few issues until today which Mark nailed down the bug
that caused the DTMF to be unreliable.
Ok here is how you would do it:
in your zapata.conf.sample:
; In some cases, the echo canceller doesn't train quickly enough and there
; is echo at the beginning of the call. Enabling echo training will cause
; asterisk to briefly mute the channel, send an impulse, and use the impulse
; response to pre-train the echo canceller so it can start out with a much
; closer idea of the actual echo.
;
;echotraining=yes
If you set this to yes I recommend using ztmonitor to adjust the rxgain
and txgain:(ztmonitor isn't installed so its in /usr/src/zaptel)
asterisk zaptel # ./ztmonitor 1 -v
Rx ##################################Tx
Place a call... let the remove party talk.. then adjust them till they
sound better.
For example(here is what I use):
rxgain=10.5
txgain=-4.5
Hope this helps with X100P echo issues. I no longer have that 5-10
seconds of echo when making a call. HUGE IMPROVEMENT!
Thank you Mark...
Later,
Brian