I get echo on my X100P for about 15 seconds then it disappears. Believe me,
when I get a chance I'm going to tweak it since my wife nags me about it. I
converted my house over to *.
My setup:
Compaq Deskpro EN SFF P3 500
Dual NIC for real IP and internal IP
X100P Card for PSTN.
Cisco ATA186 (two cordless phones for the old lady)
Cisco 7960 Phone
Cisco 2621 w/ 2 FXO's and 2 FXS (Fax is connected)
And NuFone for my business context.
Joe
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Brian West
Sent: Monday, December 01, 2003 8:38 PM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Echo: X100P vs. Cisco FXO cards
I get no echo on my X100P's..... and Dont crank it up to 256 leave it at 128
and check the ring and tip of your phone line. The x100p can't correct them
if they are reversed.
bkw
On Mon, 1 Dec 2003, Jay Brussels wrote:
> I have started to test Asterisk and so far I am very impressed. My
> only problem right now is an unacceptable echo with a X100P card. I
> have read the previous posts regarding echo cancellation, tried
> echotraining, all the tap settings for echocancel (echocancel=256
> sounds
> wild!!!) and I would like to know if anyone that has had a problem with
> echo has successfully overcome this with a Cisco Router with the FXO cards
> in place of the X100P?
>
> I have two 2620's not being used and I an thinking of buying FXO cards
> rather than buying a T-1 card and channel bank.
>
> Suggestions appreciated.
>
> Jay
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
