Hello,
I have it working on distinguising just the local numbers of our 4 B channels
and the number assigned to the group. I have ordered an '100 in-dial
range'
here in Australia and should have it available to me by the end of next week, I
can let you know how it goes.
Regards,
Matthew Enger
menger@xi.com.au
Quoting Michal Rybarik <asterisk@21.sk>:
> Hello all,
>
> does anybody have experiences with DDI on ISDN BRI? I would like to
> order DDI with 10 or 100 numbers from telco company, and use DDI
> numbers for direct calling SIP/H323 clients. But I don't know if
> Asterisk supports it, in archive I found only one answer about it, and
> I'm not sure. I am going to use it with isdn4linux card.
>
> Maybe DDI is called differently in other countries, I'll explain -
> normally customer gets a few (3 or 8 in Slovakia) MSNs for his ISDN
> BRI line, for example 7895601 (-03). With DDI 100, customer gets
> number for example 78956xx and he can assign two digits (100
> extensions) as he wants. Telco equipment must be configured to support
> DDI, otherwise it will not possible to make or recieve calls. PBXs
> generally supports it, telephones not.
>
> Thanks a lot,
>
> --
> Michal Rybarik
> 21.sk
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.