search for: ddi

Hi everyone, I want to get multiple DDI's and hunting across those DDI's in case one of the lines is busy using analog phone lines. The system is for a large house so I want 3 x PSTN lines. 3 x DDI's and the ability for those DDI's to be presented across all three PSTN lines. BT say you can't have more than one DDI...

Hello all, does anybody have experiences with DDI on ISDN BRI? I would like to order DDI with 10 or 100 numbers from telco company, and use DDI numbers for direct calling SIP/H323 clients. But I don't know if Asterisk supports it, in archive I found only one answer about it, and I'm not sure. I am going to use it with isdn4linux card. May...

...olution will be a Primary rate (ISDN30) with 8 channels. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Matt Sent: 07 June 2004 10:19 To: asterisk-users@lists.digium.com Subject: Re: RE: [Asterisk-Users] Multiple DDI & Hunting on Analog Lines (UK) Drat! - The problem is we aren't on a digital exchange. We can't even get DSL here. :-( > Matt - > Your only tidy solution is to go for 1 ISDN line with some MSNs and an > analogue line. You will have to have an analogue line for ADSL >...

hello, anyone has worknig ISDN hfc-pci card in DDI (DID) point2point mode? what kernel ? and second question mISDN driver .. anyone has working solution with mISDN and maybe fritz card? what you suggest for DDI -> point2point mode (card,kernel,chan_..., ...) ? thank you, Tomaz

I'm using a TE405p with all four spans enabled, two configured as pri_cpe and two as pri_net, the asterisk is sitting between our ISDN (UK BT EuroISDN30) and our phone system. We have 200 DDI numbers on the ISDN's and I need to give one of our clients dial-in access to be able to monitor calls we handle on their behalf. I've got ZapBarge working but I need to restrict the client access to calls on their unique DDI only. Unfortunately, of course at any moment in time a call on...

Hi all, Is there in * support for DDI (Direct dial-in)? I buy a AVM ISDN-Controller B1 & I want to use it in point-to-point mode on my ISDN BRI link with DDI preselection. That means, that I have phone number range from ATM, e.g. +421 2 xx xx xx yy where yy I can set-up on my PBX (*) xx - fixed numbers. I want various action for...

Hi everyone I'm interested in using the Telappliant/voip-talk offering as an alternative to my DDI analog problem. (see [Asterisk-Users] Multiple DDI & Hunting on Analog Lines (UK) for details) Does anyone on the list have any recent comments on reliability etc? I would really appricated some positive and negative comments. Cheers Matt

If anyone can help me with this I'll be soooo grateful :) We have a isdn30 line, with a DDI range. We also have 2 business units that have separate 0870 numbers that are mapped onto 2 DDI numbers. I would like to be able to present these 0870 numbers from the business units so that the correct number is displayed on a callerid, or when 1471 is dialled. BT claim that I can only have a...

Author: pjha Repository: /hg/zfs-crypto/gate Revision: 1384398963b7f0f86003735b23845a984fe75f5e Log message: 6371650 pci capability ddi iterator Files: create: usr/src/uts/common/io/pci_cap.c create: usr/src/uts/common/sys/pci_cap.h update: usr/src/uts/common/Makefile.files update: usr/src/uts/common/io/pci_intr_lib.c update: usr/src/uts/common/io/pcie.c update: usr/src/uts/sun4u/io/pci/pci_pci.c update: usr/src/uts/sun4u/i...

Hi everybody, I have problems with the chan_capi in the P2P (DDI) mode and it is not possible to use zaphfc, because I need call defelction. This is my capi.conf: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 language=de ;mode=immediate isdnmode=ptp ; 123456 -0 [interfaces] msn=1234560 inc...

I have * configured with 2 X100P cards (fxs_ks). The lines from the telco are 'analogue both way ddi trunks'. This means that every inbound call contains digits that represent an extension on the PBX. I can make outbound calls from * with no problem however I cannot receive inbound calls on these trunks. Some investigation has shown that when the line is idle there is 50 volts present and ztt...

Hi, I'd like to know if and how can I set CallerIDNum for outgoing calls on a PRI line with DDI. Does anyone know if italian Telecom permit this? Thanks -- Domenico Viggiani

Hi all, I'm looking at my options for getting access to ISDN ISUP fields from DDI numbers, when connecting to a 3rd party Asterisk server. This is for a custom voicemail solution, and at this stage I want to avoid renting a PRI. The information I need to capture is: - Calling Number - Called Number (e.g. the DDI handling the call) - Redirecting Number (e.g. the device diverting...

...d I can initiate calls on the B200P BRI span, but there may be something wrong with my inbound BRI setup: there is no indication of an inbound call when I dial in to it from the PSTN. When I run "pri intense debug" and make a call to the BRI span, I can see a message containing the DDI that I'm dialing, in this case 336027 (BT supplies only the last 6 digits of a delivered number). See debug output below... Have I neglected to set up some needed parameter? This all worked on older boards when using bristuff, but now I want to use dahdi. My client is in the UK, connec...

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1 soft...

Hello, we had a running configruation where asterisk passed the phone number and the ddi to the pstn (i.e. 595-431) Now only the rootnumber arrives: 5950 I do not know, what to do. I tried to use callingpres (now i am just hiding every number, because 595-0 is no valid extension..) but that did not worked. > Protocol Discriminator: Q.931 (8) len=44 > Call Ref: len= 2 (re...

Hi Just moved offices in the UK and moved our Asterisk box from old one to new one. Using idefisk softphones, Junghanns quadbri card for ISDN 2e interfaces. At both offices we had one standard number and a DDI range, routed with Asterisk. We'd set up the configuration so each idefisk set its own caller ID which then got sent by the extensions.conf script. Worked fine at old place but in new place the only number which is received is the central switchboard number. The conf files are unchanged ex...

Greetings list, I'm trying to establish if there's an issue whereby certain telcos in certain countries have not updated the London, UK numbering plan to include some parts of the 020 3 range, despite it being in operation for some two years now. To help with this, I'd be most grateful anyone outside the UK could make a test call to +44 203 3393 7389. This is a simple test number

Would be nice to do both (type 2 and 3 I believe in Oftel terms), but I'd accept just our DDI if that was all I could get. Steve -----Original Message----- From: Storer, Darren [mailto:starusers@comgate.tv] Sent: 01 July 2004 09:35 To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Providing Telewest in the UK with per extension outbound callerID Hi Steve,...

...nwatch.org >Delivered-To: moderator for vulnwatch@vulnwatch.org >Date: Mon, 7 Apr 2003 07:44:58 +0000 (UTC) >From: Erik Parker <erik.parker@digitaldefense.net> >X-X-Sender: Erik Parker <erik.parker@digitaldefense.net> >To: vulnwatch@vulnwatch.org >Subject: [VulnWatch] [DDI-1013] Buffer Overflow in Samba allows remote >root compromise > >-----BEGIN PGP SIGNED MESSAGE----- >Hash: SHA1 > > >|------------------------------------------------------------------------------| > Digital Defense Inc. Security Advisory > DDI-1013 labs@digital...