search for: zhone

Modem connect speeds on calls through * seem to be lower than calls made through the telephone company lines or our old Rolm PBX. All data calls have 2 wire analog modems on both ends. For my set up I have channels of a Zhone channel bank tied to 2 modems. The Zhone channel bank interfaces my * server with a T400P card. modem --- Zhone Channel bank - * via T400P card - Zhone channel bank - modem In extensions.conf I have added the 'd'ata option. exten => 333,1, Dial(Zap/19,,d) In zapata.conf echo cancel...

...n working well, but the only problem is that it doesn't support callerid (from the POTS side). > -----Original Message----- > From: John Schmerold [mailto:john@katy.com] > Sent: Tuesday, 5 August 2003 12:37 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Zhone Zplex 10 units > > Thanks for the Zplex heads up. > > Steven Critchfield wrote: > > On Mon, 2003-08-04 at 13:13, John Schmerold wrote: > > > >>I frequently see Zhone Zplex 10 units on Ebay - cheap. > >> > >>What's the story on these? > &gt...

Hey guys, I've had a working Asterisk setup going for a while now, but am having problems with the Zhone Zplex 10b thinking that during ringing, an extension has answered the call when infact it hasn't. This only seems to happen on some of the ports and doesn't appear to be specific to the handset. Does anyone have any suggestions as to how I could go about fixing this (aside from throwing th...

We were just testing forwarding one of our numbers to a VoIP CLEC and ran into an issue that we've seen before but never figured out the cause of. It seems if you call us and immediately hang up - or if the call is forwarded by Verizon (which stills rings about ? of one time) the Zhone detects the ring and answers the call.. The Zhone however DOESN"T detect that it's no longer ringing nor that the user hung up. Instead it falls through to ring the operator eventually which can be frustrating. Does anyone know of a way to get around this? i.e. tell the zhone not t...

I've just received a brand new zhone z-plex 10b. At first, I was able to login using the default (admin/zhone), and started exploring with the configuration, trying to set it up to work with the TE410P. Somehow the admin password was changed, but I don't know what it is anymore. So now I'm stuck at the login prompt, and can&...

This may be a long shot, but I suppose it can't hurt to ask! I have seen chatter regarding Zhone channel banks amongst the asterisk users primarily. In all of my searching I am guessing that the majority of people using the Zhone's are probably reading this, and with the support that I have seen from Zhone so far this is probably my best bet, I recently picked one up for a project with...

I have just make zhone set2default to factory default setting. What do i have to do to make T1 interface zhone match with T100P.

Hi. I was wondering if the zplex in the dev kit could be configured to have all fxs ports, instead of the standard 8 fxo + 16 fxs. If so, anyone managed to do that? Matteo. -- Matteo Brancaleoni Powered by RedHat Linux 8.0 Linux User #153521 -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GS d? s:- a- C+++ UL++++ P+ L+++ E- W+++ N++ o K- w-- O- M-- V-- PS PE- Y PGP++ t 5 X+ R tv- b++ DI D+ G e

Hi 2 all. I've a nice issue my * system. I have: asterisk latest cvs T100P + Zhone cb (3fxo+10fxs used) Diva Server 4BRI running Capi a bunch of pots and sip phones The whole system is running good (thanks to capigod and Bic. for the help with the Eicon Diva), but there's a very strange issue when calls arrive on the Diva and then bridged to the pots on the channel bank: the...

I've got a Zhone 24 port FXS to configure. The configuration is beyond stupid. The people that designed this unit should be chased down and fired. I'm going around in circles frigging with all the options. Does anyone have a config file for this unit that I can use as a starting point? -bill wlloyd...

Everyone - thought I would pass on a useful piece of information. Finally got a solution to my phantom ringing problem. Problem - the zhone is triggered into detecting ringing by the Automatic Line Insulation Tests (ALIT or LIT) run nightly automatically by the telco. Here it is twice between 8pm and 9pm on my particular lines. My first approach before I knew specifically the buzzword for the testing, was to call up repair and desc...

I've picked up a few Zhone channel banks that I currently am using to test. I've been ready to go into production but I'm a little worried by their behavior. Yes, I've read that they are evil and unsupported by their masters. No, I'm not using the data port. I just need a channel bank. Well, sometimes, wh...

Hi, I have a mint, like-new (used only once) Zhone Z-Plex channel bank for sale. It has 16 FXS and 8 FXO (part number: Z-PLEX-10-24S/O). It functions as a channel bank, router, and CSU/DSU, combining T1, analog voice, and data. D4, SF, and ESF line formats are supported with AMI or B8ZS coding. It has dual T1 jacks, one ethernet jack, one seria...

...osand 16fxs) connected to a T100 digium > > card, > > RH8.0. > > > > soon after running * i get this warning > > > > "file chan_zap.c,line 4155 (ss_thread):CallewrID returned with error > > on > > channel 'zap/7-1' > > > > The zhone does not support inbound callerID. Try turning off Caller ID > on your inbound channels(1-8) in zapata.conf. > > I am using a zhone in this manner and it works fine for me. > > Don Pobanz > > > then executes the other applications itself. > > > > --executing Wait...

Is there a trick to getting into a zhone z-plex 10 through the serial interface? I tried using a couple of terminal programs the other day and didn't get a login. I have a port that quit working and it doesn't appear to be wiring related. I had another case like this the other day, and after fiddling with the wiring for a long...

Hi I have the last firmware for zplex, if you like i send it to you, about the second question 24s means 24 extensions so you can configurate as you wish as fxo or fxs. Att Yelson Vivas

I have been playing with Asterisks for about 6 months, and have fallen in love with it. I have finally taken the plunge and gotten a T100P and a Zhone Zplex-10B (24FXS) channel bank. I have read everything that I can find on the mailing list, checked wiki, even searched the web with google. I believe that most everything is configured right The drivers load without error, and asterisks will come up and run. Unfortunately, I cannot seem...

Greetings, I am running Asterisk with a T100P and a Zhone channel bank for over a month now. For the most part it works fine but from time to time (about once a week) the system will not let go of a line and will play the greeting over and over. Anyone calling gets a busy signal. If I reset Asterisk everything works fine. Has anyone seen this problem befo...

Ok, the Zhone sucks and the Adtran 750/850 seems to be a little too expensive. Can anyone recommend a decent channelbank that won't break the bank? TIA, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year

I've got a Wildcard T100P along with a Zhone Zplex 10 24S/O which has been working fine for me now for a while. These have been pulled out of a working Asterisk installation (as they were no longer required) to use at home only to find that the fan noise is too loud. As such I'm looking to sell off this hardware and replace it with some c...