asterisk users - Oct 2003 - Howto configure asterisk with AVM ISDN card

Hi guys, I'trying to setup Asterisk with an AVM Fritz PCI ISDN card with no 
success. I have an IP phone from Micronet and I want to receive and place 
calls over ISDN. But I'm not sure if I need the binary CAPI from AVM or 
isdn4linux. I've tryed with redhat 9 and with Suse 8.2. Cold someone help 
me? Thank you very much.

_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE*  
http://join.msn.com/?page=features/junkmail

Claudio Condolf wrote:
> Hi guys, I'trying to setup Asterisk with an AVM Fritz PCI ISDN card 
> with no success. I have an IP phone from Micronet and I want to 
> receive and place calls over ISDN. But I'm not sure if I need the 
> binary CAPI from AVM or isdn4linux. I've tryed with redhat 9 and with 
> Suse 8.2. Cold someone help me? Thank you very much.
>
I did the following on RH9..

First goto ftp://ftp.avm.de/cardware/fritzcrd.pci/linux/suse.82/ and 
read the "info.txt" and download the tar.gz file..

Follow the instructions to compile and install the module..

Then goto http://www.junghanns.net/asterisk and download chan_capi

Follow the instructions to compile and install..

This should get you to a point where you can load the capi driver for 
the ISDN card ("capi init" from a command line) and load the capi 
channel driver when Asterisk loads..

Later..