search for: cardwar

Hi ! I've fetched a spare AVM B1 card from the cellar, and installed it. After "modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io 0xa400 irq 5 membase 0xf1800000 type B1 PCI ver_driver 3.09-10 ver_cardtype B1 ver_serial...

Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which creates a directory called "fritz" 4) edit the file fritz/src.drv/tools.c and put "//" in front of the following lines to exclude them : #include <linux/string...

I have an old A1 ISDN card that we used to use in the mid 1990's for the delivery of data to our ISP I have seen some users have been using them, with respect to doing web searches. Can someone please let me know what drivers I require to use this card under debian and with asterix, and what the limitations are of using this card. I dont want to make calls but do inbound using it. The

Hi guys, I'trying to setup Asterisk with an AVM Fritz PCI ISDN card with no success. I have an IP phone from Micronet and I want to receive and place calls over ISDN. But I'm not sure if I need the binary CAPI from AVM or isdn4linux. I've tryed with redhat 9 and with Suse 8.2. Cold someone help me? Thank you very much.

Hello, I have been wrestling with installing the CAPI drivers for AVM Fritz in order to use chan_capi with Asterisk. I use an SMP machine, RH 9. I have found rpm's for CAPI and AVM drivers (namely: capi4k-utils-2003.06.16-08.mungo.RH9.i686.rpm and kernel-2.4.20-8- avmfcpci-03.11.02-08.mungo.RH9.i686.rpm), but I believe that they support only single processor machines. I've already

Hello, I?m trying to compile the Fritz CAPI module for Debian stable, following the steps related in http://www.voip-info.org/tiki-index.php?page=Asterisk%20AVM%20Fritz%20CAPI%20Driver%20Install But I always get the same error, debian-asterisk:/home/ismaelg/fritz# make (cd src.drv; make CARD=fcpci) make[1]: Entering directory `/home/ismaelg/fritz/src.drv' cc -c -DMODULE

Hi list, i'm keen to move to Asterisk 1.6, so really need to update my system which is running Mandrake 9.2 although it has been solid for years, fo Fedora 8. I have a Fritz! card for ISDN BRI, I have installed the drivers/kernel drivers from ATrpms (http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm)

...http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install) Guidance states 'Download and install your kernel sources' - I installed these as part of the original installation, so I'll ignore. I download and install the CAPI driver - # cd /usr/src # wget ftp://ftp.avm.de/cardware/fritzcrd.pci/linux/suse.82/fcpci-suse8.2-03.11 .02.tar.gz # tar -xzvf fcpci-suse8.2-03.11.02.tar.gz # cd fritz Great! Looking good! Guidance states modify the makefile in /usr/src/src.drv as follows - Replace - CARD_PATH = /lib/modules/`uname -r`/misc with - CARD_PATH = /li...