asterisk users - Mar 2003 - Whoah! My E400P system went AWOL

Hi,

I came back from a quiet weekend today and found my E400P box to have gone 
astray. Asterisk is loaded from inittab, and started crashing and reloading 
a couple of thousands of times, each time notifying my monitoring service :-P

I remember there would be issues on old cvs stuff since the crash at digium 
so I made a clean checkout just now.

Here is what happens when I load manually:

  [chan_oh323.so]WARNING[11276]: File chan_zap.c, Line 5237 (zt_pri_error): 
PRI: Read on 140 failed: Unknown error 500
PRI got event: 5
NOTICE[12301]: File chan_zap.c, Line 4233 (handle_init_event): Alarm 
cleared on channel 94
(last line repeated for every defined channel)
   == D-Channel on span 2 up
   == Restart on requested on entire span 2
/usr/local/sbin/astrun: line 4:   329 Segmentation 
fault      /usr/sbin/asterisk -vvvvc
Ouch ... error while writing audio data: : Broken pipe
vectra:~#

Any clues ?

zttool sees the channel status OK.

Best regards,
Florian

At 08:47 10-4-2003 -0700, you wrote:
>Hi,Florian
>
>      I have encountered the same problem these day. I wan't to know if
you
>have solved it and how to solve it?
I have solved it, but I have no idea what the solution was. I think I tried 
a clean cvs checkout...




Met vriendelijke groet,
Florian Overkamp
ObSimRef BV (http://www.obsimref.com/)

At 17:10 10-4-2003 -0700, you wrote:
>But I am using the new verison from CVS too.  Well,I want to know if you are
>using the Asterisk under     X window.
No, there is no X-Windows software on the server. Its a very empty debian 
box. Sorry I cant be of more help on this :P


Met vriendelijke groet,
Florian Overkamp
ObSimRef BV (http://www.obsimref.com/)

Hi,Florian

     I have encountered the same problem these day. I wan't to know if you
have solved it and how to solve it?

     Regards.

                       john

----- Original Message -----
From: "Florian Overkamp" <florian@obsimref.com>
To: <asterisk-users@lists.digium.com>
Sent: Sunday, March 23, 2003 10:59 AM
Subject: [Asterisk-Users] Whoah! My E400P system went AWOL

> Hi,
>
> I came back from a quiet weekend today and found my E400P box to have gone
> astray. Asterisk is loaded from inittab, and started crashing and
reloading
> a couple of thousands of times, each time notifying my monitoring service
:-P
>
> I remember there would be issues on old cvs stuff since the crash at
digium
> so I made a clean checkout just now.
>
> Here is what happens when I load manually:
>
>   [chan_oh323.so]WARNING[11276]: File chan_zap.c, Line 5237
(zt_pri_error):
> PRI: Read on 140 failed: Unknown error 500
> PRI got event: 5
> NOTICE[12301]: File chan_zap.c, Line 4233 (handle_init_event): Alarm
> cleared on channel 94
> (last line repeated for every defined channel)
>    == D-Channel on span 2 up
>    == Restart on requested on entire span 2
> /usr/local/sbin/astrun: line 4:   329 Segmentation
> fault      /usr/sbin/asterisk -vvvvc
> Ouch ... error while writing audio data: : Broken pipe
> vectra:~#
>
> Any clues ?
>
> zttool sees the channel status OK.
>
> Best regards,
> Florian
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>