Alarms Span RED wildcard X101P Board1 OK wcusb/0 0 ive got my asterisk server up and running and working correctly, the first time after a reinstall and reboot everything was fine - i had both alarms OK and i could get the USB extension ringing when i ran the house number from my mobile. as soon as i tried again i got a red alarm on the wildcard board. now im using the sample configuration files for the devkit lite (downloaded from the website) and i know that the loadzone settings will be different here (serbia) how do i find out what settings i should do for lines here in serbia. the telco here is worse than most ive used, and arent exactly helpful. my local exchange is very old and hasnt been upgraded for a very long time, services such as call waiting are not offered, but even so - everytime im on the internet and someone tries to call me i get disconnected. so what could be causing the red alarm and how (and where) do i change the loadzone settings? thanks in advance duncan
> as soon as i tried again i got a red alarm on the wildcard board. now im > using the sample configuration files for the devkit lite (downloaded from > the website) and i know that the loadzone settings will be different here > (serbia)Red Alarm on an X100P means that it does not detect a phone line connected to the device. I would double check your cabling. The loadzone only has to do with the sound of dialtone, etc, and i wouldn't mess with it until you have the basic functionality working. Mark
>Red Alarm on an X100P means that it does not detect a phone line connected >to the device. I would double check your cabling. The loadzone only has >to do with the sound of dialtone, etc, and i wouldn't mess with it until >you have the basic functionality working.ok now i when i plug the phoneline into the "phone" socket of the X100P there are no alarms, but when i dial the phone line its connected to i get "number busy" (from my phone) and when i reboot the machine it kernel panics (scroll lock and caps lock flashing). i havent installed anything else, except a default "everything" redhat 7.2 and webmin. so i decided to unload all the modules[0] before i reboot - and i get this message "rmmod: module wcfxo is not loaded" and then rebooting doesnt cause a kernel panic. after i do this and reboot the machine i get a red alarm on the X100P card again, even thought the line is still connected to the "phone" socket of the card. any ideas? is there any way i can get these modules to autounload before a reboot, the kernel panic problem was the reason i did a machine rebuild in the first place (didnt think through the problem hard enough that time). duncan [0] /sbin/rmmod audio /sbin/rmmod wcfxo /sbin/rmmod wcusb /sbin/rmmod zaptel