Hello! On Sat, 2003-03-08 at 10:06, Krzysztof Bujak wrote:> Hi all Asterisk Gurus. > > I am really badly in need of help. Asterisk is very lovely software, but has one big disadvantage.. > lack of documentation.But let's get to the point. > > 1. Is it normal that I get such a crappy quality with iax, some drops and clicks? > Could anyone with some similar setup check my quality and say if this is > what the people are so excited about? ( I used to work as a speech quality expert for nokia > and what I get out of asterisk is far away from the limits I would let to go out to customers:-( )First and foremost, do you have QOS setup on your network and router? QOS == Quality of Service, the ability to allow certain data packets to be sent quicker through the TCP/IP stack. This is essential to maintaining continuous data flow as any interruptions in that dataflow will cause "drops and clicks". -- Ron Gage - Saginaw, Michigan I am looking for work - resume at http://www.rongage.org/resume.doc Electrical Engineering, Linux Programming, Networking
Hi all Asterisk Gurus. I am really badly in need of help. Asterisk is very lovely software, but has one big disadvantage.. lack of documentation.But let's get to the point. 1. Is it normal that I get such a crappy quality with iax, some drops and clicks? Could anyone with some similar setup check my quality and say if this is what the people are so excited about? ( I used to work as a speech quality expert for nokia and what I get out of asterisk is far away from the limits I would let to go out to customers:-( ) 2. Is there anyone who has some HOWTO for setting up h323 with asterisk? I tried asterisk open h323 but it seg faults:-((((( And my boss is pushing to bring him some results of my investigation... Could anyone help me with that? 3 Another question is what codecs can I use, while using h323 with asterisk? Somewhere it passed through my eyes that there is only g711 available, which seems to me as a joke. Anyone? Thanks in advance for helpful information. Bestest regards, Krzysztof Bujak ==========================================================================Ta wiadomosc zostala sprawdzona na obecnosc wirusow komputerowych przez system antywirusowy na serwerze IT Form. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20030308/a55fba09/attachment.html>
Krzysztof Bujak wrote:> 2. > Is there anyone who has some HOWTO for setting up h323 with asterisk? > I tried asterisk open h323 but it seg faults:-((((( >You are going to need to be more specific to which H.323 Channel Driver you are running. There are two radically different H.323 Channel Drivers out there. Jeremy McNamara -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20030308/a2b15272/attachment.html>
I am also getting a seg fault when asterisk tries to load chan_oh323.so. What should I try to get it to work? [chan_oh323.so] => (OpenH323 Channel Driver) == Parsing '/etc/asterisk/oh323.conf': Found Segmentation fault On Saturday, March 8, 2003, at 09:06 AM, Krzysztof Bujak wrote:> ...I tried asterisk open h323 but it seg faults:-(((((...
expat has to deal with XML. It is libexpat. and should be available from your distribution provider, or via http://www.jclark.com/xml/expat.html On Mon, 2003-03-10 at 16:47, Krzysztof Bujak wrote:> Jeremy, > What is lexpat,and where to get it? > I am getting errror when I try to compile chan_h323 > saying: cannot find lexpat > > Best regards, > Krzysztof BUja > ----- Original Message ----- > From: Jeremy McNamara > To: asterisk-users@lists.digium.com > Sent: Saturday, March 08, 2003 6:34 PM > Subject: Re: [Asterisk-Users] H323 on and on > > Krzysztof Bujak wrote: > > 2. > > Is there anyone who has some HOWTO for setting up h323 with > > asterisk? > > I tried asterisk open h323 but it seg faults:-((((( > > > You are going to need to be more specific to which H.323 > Channel Driver you are running. > > There are two radically different H.323 Channel Drivers out > there. > > > > Jeremy McNamara > > ______________________________________________________________ > Ta wiadomosc zostala sprawdzona na obecnosc wirusow > komputerowych przez system antywirusowy na serwerze IT Form. > > ______________________________________________________________________ > Ta wiadomosc zostala sprawdzona na obecnosc wirusow komputerowych > przez system antywirusowy na serwerze IT Form.-- Steven Critchfield <critch@basesys.com>
Jeremy,
What is lexpat,and where to get it?
I am getting errror when I try to compile chan_h323
saying: cannot find lexpat
Best regards,
Krzysztof BUja
----- Original Message -----
From: Jeremy McNamara
To: asterisk-users@lists.digium.com
Sent: Saturday, March 08, 2003 6:34 PM
Subject: Re: [Asterisk-Users] H323 on and on
Krzysztof Bujak wrote:
2.
Is there anyone who has some HOWTO for setting up h323 with asterisk?
I tried asterisk open h323 but it seg faults:-(((((
You are going to need to be more specific to which H.323 Channel Driver you
are running.
There are two radically different H.323 Channel Drivers out there.
Jeremy McNamara
------------------------------------------------------------------------------
Ta wiadomosc zostala sprawdzona na obecnosc wirusow komputerowych przez system
antywirusowy na serwerze IT Form.
==========================================================================Ta
wiadomosc zostala sprawdzona na obecnosc wirusow komputerowych przez system
antywirusowy na serwerze IT Form.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20030310/fb4e2b6b/attachment.htm