I was wondering if this is a known problem..
I am running stock b118 bits. System has a UFS root
and a single zpool (with multiple nfs, smb, and iscsi
exports)
Powered off my machine last night.. Powered it on this
morning and it hung during boot. It hung when reading the
zpool disks.. It would read them for a while, stop
reading and hang. I let it sit for over 4 hours... Tried
multiple power cycles, etc.
I was able to power off the disks, and boot the machine..
I exported the zpool, powered on the disks, and rebooted.
The machine booted and I tried to import the zpool.
It did import after about 5 minutes (which seemed a lot
longer than it had been in the past), I saw the following
processes running during this time..
root 820 368 0 15:14:37 ? 0:00 zfsdle /devices/pci at
0,0/pci1043,815a at 8/disk at 1,0:a
root 818 368 0 15:14:37 ? 0:00 zfsdle /devices/pci at
0,0/pci1043,815a at 7/disk at 0,0:a
root 819 368 0 15:14:37 ? 0:00 zfsdle /devices/pci at
0,0/pci1043,815a at 8/disk at 0,0:a
One thing that could be related is that I was running
a scrub when I had powered off the system. The scrub
started up again after I had imported the pool.
Anyone know if this is a known problem?
Thanks,
MRJ
-bash-3.2# zpool status
pool: tank
state: ONLINE
scrub: scrub in progress for 0h12m, 3.25% done, 6h16m to go
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz1 ONLINE 0 0 0
c1t0d0 ONLINE 0 0 0
c2t0d0 ONLINE 0 0 0
c1t1d0 ONLINE 0 0 0
errors: No known data errors
-bash-3.2#
-bash-3.2# zdb -C
tank
version=16
name=''tank''
state=0
txg=2866038
pool_guid=690654980843352264
hostid=786700041
hostname=''asus-a8n''
vdev_tree
type=''root''
id=0
guid=690654980843352264
children[0]
type=''raidz''
id=0
guid=9034903530721214825
nparity=1
metaslab_array=14
metaslab_shift=33
ashift=9
asize=960171343872
is_log=0
children[0]
type=''disk''
id=0
guid=17813126553843208646
path=''/dev/dsk/c1t0d0s0''
devid=''id1,sd at
AST3320620AS=____________5QF3YSJJ/a''
phys_path=''/pci at 0,0/pci1043,815a at 8/disk
at 0,0:a''
whole_disk=1
DTL=32
children[1]
type=''disk''
id=1
guid=6761028837288241506
path=''/dev/dsk/c2t0d0s0''
devid=''id1,sd at
AST3320620AS=____________5QF3YQXB/a''
phys_path=''/pci at 0,0/pci1043,815a at 7/disk
at 0,0:a''
whole_disk=1
DTL=31
children[2]
type=''disk''
id=2
guid=15791031942666816527
path=''/dev/dsk/c1t1d0s0''
devid=''id1,sd at
AST3320620AS=____________5QF3YS51/a''
phys_path=''/pci at 0,0/pci1043,815a at 8/disk
at 1,0:a''
whole_disk=1
DTL=30
-bash-3.2#