Kobayashi Takanori
2009-May-26 14:15 UTC
[Xen-users] XenClient boot error on ThinkPad X200
Hello I could run XenClient(Dom0) on Dell OPTIPLEX 755. After that, I trying to it on a laptop pc(ThinkPad X200). But When booted on ThinkPad X200, I got a error below. 1.PC is started. 2.Grub menu appears, and select "XenClient". 3.Nothing booted. In Black Screen, Only a cursor is blinking on the left,top of the screen. 4.For that, I rebooted a pc. 5.Grub menu appears again, and select "> Maintenance" menu, and select "XenClient - Full console output" memu. 6.Then, the following messages appear on the screen. ----------------------------------------------------------------- - - - - - - - - - - - - - - - - - - (xen) ENtal of 2processors activated. (xen) ENABLE IO-APIC IRQs (xen) -> Using new ACK method (xen) checking TSC synchronization acros 2 CPUs: passed. (xen) Platform timer is 14.318MHz HPET (xen) Brouht up 2 CPUs (xen) I/O virtuallisation enabled (xen) I/O virtuallisation for PV guests disabled (xen) [VT-D]iommu.c:773: iommu_page_fault: iommu->reg = ffff838bfff57000 (xen) [VT-D]iommu.c:742: iommu_fault_status: Fault Overflow (xen) [VT-D]iommu.c:727: iommu_fault:DMA Write: 0:2.0 addr ffff0000 REASON 5 iommu->reg = ffff838bfff57000 (xen) print_vtd_entries: iommu = ffff8300bc2bddf0 bdf = 0:2:0 gmfn = ffff0 (xen) root_entry = ffff83013bdef000 (xen) root_rntry[0] = 1376c0001 (xen) context = ffff8301276c0000 (xen) 13 = ffff83013bde9000 (xen) 13_index = 3 (xen) 13[3] = 1376aa003 (xen) 12 = ffff8301376aa000 (xen) 12_index = 1ff (xen) 12[1ff] = 0 (xen) 12[1ff] not present (xen) [VT-D]iommu.c:773: iommu_page_fault: iommu->reg = ffff838bfff55000 ----------------------------------------------------------------- I would like to learn what caused this error. And, Is there a person who could run XenClient on X200 or other ThinkPad series? Thanks. ===DATA==My environment is described in the following. ----------------------------------------------------------------- Getting Source Date: 2009/05/21 PC:lenove ThinkPad X200(Core 2 Duo 2.66GHz x 2, 4GB memory.) OS: /dev/sda1 WindowsXP for VM /dev/sda2 Fedora 10 For Build XenClient /dev/sda3 For XenClient partition Operation: I tried according to the HOWTO of Git repository (manual install) http://xenbits.xensource.com/gitweb?p=xenclient/build.git;a=tree ----------------------------------------------------------------- Regards, --------- Taka <kb-taka@kick.gr.jp> _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Trolle Selander
2009-May-26 16:58 UTC
Re: [Xen-users] XenClient boot error on ThinkPad X200
You need to add the iommu_inclusive_mapping=1 parameter after iommu=required in the xen grub entry. -- Trolle 2009/5/26 Kobayashi Takanori <kb-taka@kick.gr.jp>> > Hello > > I could run XenClient(Dom0) on Dell OPTIPLEX 755. > After that, I trying to it on a laptop pc(ThinkPad X200). > > But When booted on ThinkPad X200, I got a error below. > > 1.PC is started. > 2.Grub menu appears, and select "XenClient". > 3.Nothing booted. > In Black Screen, Only a cursor is blinking > on the left,top of the screen. > > 4.For that, I rebooted a pc. > 5.Grub menu appears again, and select "> Maintenance" menu, > and select "XenClient - Full console output" memu. > 6.Then, the following messages appear on the screen. > > > ----------------------------------------------------------------- > - - - - - - > - - - - - - > - - - - - - > (xen) ENtal of 2processors activated. > (xen) ENABLE IO-APIC IRQs > (xen) -> Using new ACK method > (xen) checking TSC synchronization acros 2 CPUs: passed. > (xen) Platform timer is 14.318MHz HPET > (xen) Brouht up 2 CPUs > (xen) I/O virtuallisation enabled > (xen) I/O virtuallisation for PV guests disabled > (xen) [VT-D]iommu.c:773: iommu_page_fault: iommu->reg = ffff838bfff57000 > (xen) [VT-D]iommu.c:742: iommu_fault_status: Fault Overflow > (xen) [VT-D]iommu.c:727: iommu_fault:DMA Write: 0:2.0 addr ffff0000 REASON > 5 iommu->reg = ffff838bfff57000 > (xen) print_vtd_entries: iommu = ffff8300bc2bddf0 bdf = 0:2:0 gmfn = ffff0 > (xen) root_entry = ffff83013bdef000 > (xen) root_rntry[0] = 1376c0001 > (xen) context = ffff8301276c0000 > (xen) 13 = ffff83013bde9000 > (xen) 13_index = 3 > (xen) 13[3] = 1376aa003 > (xen) 12 = ffff8301376aa000 > (xen) 12_index = 1ff > (xen) 12[1ff] = 0 > (xen) 12[1ff] not present > (xen) [VT-D]iommu.c:773: iommu_page_fault: iommu->reg = ffff838bfff55000 > ----------------------------------------------------------------- > > > I would like to learn what caused this error. > And, Is there a person who could run XenClient on X200 or other ThinkPad > series? > > Thanks. > > > ===DATA==> My environment is described in the following. > ----------------------------------------------------------------- > Getting Source Date: 2009/05/21 > PC:lenove ThinkPad X200(Core 2 Duo 2.66GHz x 2, 4GB memory.) > OS: > /dev/sda1 WindowsXP for VM > /dev/sda2 Fedora 10 For Build XenClient > /dev/sda3 For XenClient partition > > Operation: I tried according to the HOWTO of Git repository (manual > install) > http://xenbits.xensource.com/gitweb?p=xenclient/build.git;a=tree > ----------------------------------------------------------------- > > Regards, > --------- > Taka <kb-taka@kick.gr.jp> > > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Kobayashi Takanori
2009-May-27 06:57 UTC
Re: [Xen-users] XenClient boot error on ThinkPad X200
Hello, Trolle
Thanks a lot. It succeeded in starting XenClient in X200.
Best regards,
---------
Taka <kb-taka@kick.gr.jp>
---------------------- /config/boot/grub/grub.cfg--------------------------
set default=0
set timeout=5
#set menu_color_normal=cyan/blue
#set menu_color_highlight=white/blue
set root=(xenclient-config)
if loadfont /boot/grub/unifont.pf2 ; then
set
gfxmode="1024x768x32;800x600x32;640x480x32;1024x768;800x600;640x480"
insmod gfxterm
insmod vbe
if terminal_output gfxterm; then true ; else
terminal gfxterm
fi
fi
insmod png
background_image /boot/grub/background.png
menuentry "XenClient" {
set root=(xenclient-root)
# multiboot /boot/tboot.gz loglvl=none
### multiboot /boot/xen.gz console=/dev/null dom0_mem=128M
iommu=required
multiboot /boot/xen.gz console=/dev/null dom0_mem=128M
iommu=required iommu_inclusive_mapping=1
module /boot/vmlinuz console=/dev/null
root=/dev/mapper/xenclient-root autostart
module /boot/initramfs.gz
# module /boot/lcp_data.bin
# module /boot/sinit_acm.bin
}
# TAG PVM
menuentry "Primary VM" {
set root=(hd0,1)
chainloader +1
}
# END TAG PVM
menuentry "> Maintenance" {
configfile (xenclient-root)/etc/grub.cfg
}
#
---------------------------------------------------------
----- Original Message -----
From: Trolle Selander
To: Kobayashi Takanori
Cc: xen-users@lists.xensource.com
Sent: Wednesday, May 27, 2009 1:58 AM
Subject: Re: [Xen-users] XenClient boot error on ThinkPad X200
You need to add the iommu_inclusive_mapping=1 parameter after iommu=required
in the xen grub entry.
-- Trolle
2009/5/26 Kobayashi Takanori <kb-taka@kick.gr.jp>
Hello
I could run XenClient(Dom0) on Dell OPTIPLEX 755.
After that, I trying to it on a laptop pc(ThinkPad X200).
But When booted on ThinkPad X200, I got a error below.
1.PC is started.
2.Grub menu appears, and select "XenClient".
3.Nothing booted.
In Black Screen, Only a cursor is blinking
on the left,top of the screen.
4.For that, I rebooted a pc.
5.Grub menu appears again, and select "> Maintenance" menu,
and select "XenClient - Full console output" memu.
6.Then, the following messages appear on the screen.
-----------------------------------------------------------------
- - - - - -
- - - - - -
- - - - - -
(xen) ENtal of 2processors activated.
(xen) ENABLE IO-APIC IRQs
(xen) -> Using new ACK method
(xen) checking TSC synchronization acros 2 CPUs: passed.
(xen) Platform timer is 14.318MHz HPET
(xen) Brouht up 2 CPUs
(xen) I/O virtuallisation enabled
(xen) I/O virtuallisation for PV guests disabled
(xen) [VT-D]iommu.c:773: iommu_page_fault: iommu->reg = ffff838bfff57000
(xen) [VT-D]iommu.c:742: iommu_fault_status: Fault Overflow
(xen) [VT-D]iommu.c:727: iommu_fault:DMA Write: 0:2.0 addr ffff0000 REASON 5
iommu->reg = ffff838bfff57000
(xen) print_vtd_entries: iommu = ffff8300bc2bddf0 bdf = 0:2:0 gmfn = ffff0
(xen) root_entry = ffff83013bdef000
(xen) root_rntry[0] = 1376c0001
(xen) context = ffff8301276c0000
(xen) 13 = ffff83013bde9000
(xen) 13_index = 3
(xen) 13[3] = 1376aa003
(xen) 12 = ffff8301376aa000
(xen) 12_index = 1ff
(xen) 12[1ff] = 0
(xen) 12[1ff] not present
(xen) [VT-D]iommu.c:773: iommu_page_fault: iommu->reg = ffff838bfff55000
-----------------------------------------------------------------
I would like to learn what caused this error.
And, Is there a person who could run XenClient on X200 or other ThinkPad
series?
Thanks.
===DATA==My environment is described in the following.
-----------------------------------------------------------------
Getting Source Date: 2009/05/21>>PC:lenove ThinkPad X200(Core 2 Duo 2.66GHz x 2, 4GB memory.)
PC:lenove ThinkPad X200(Core 2 Duo 2.4GHz x 2, 4GB memory.)
OS:
/dev/sda1 WindowsXP for VM
/dev/sda2 Fedora 10 For Build XenClient
/dev/sda3 For XenClient partition
BIOS Version : 1.10(6DET33WW)
BIOS DATE : 2008-10-27
Operation: I tried according to the HOWTO of Git repository (manual install)
http://xenbits.xensource.com/gitweb?p=xenclient/build.git;a=tree
-----------------------------------------------------------------
Regards,
---------
Taka <kb-taka@kick.gr.jp>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users