I''ve just installed Xen on a new CentOS 5.1 system, and I
can''t seem
to make xenbr0 connect to the network. This system has a single
physical network card. Apart from creating a few DomU guests, I have
not changed any of the configuration.
After running network-bridge, xenbr0 and friends are created, but the
address and routing info is not moved.
James
# ip addr list (abridged)
2: peth0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen
100
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
5: vif0.0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
6: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether 00:19:d1:60:b2:6c brd ff:ff:ff:ff:ff:ff
inet 10.192.70.24/24 brd 10.192.70.255 scope global eth0
inet6 fe80::219:d1ff:fe60:b26c/64 scope link
valid_lft forever preferred_lft forever
45: xenbr0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::200:ff:fe00:0/64 scope link
valid_lft forever preferred_lft forever
# brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no peth0
vif0.0
# ip route list
10.192.70.0/24 dev eth0 proto kernel scope link src 10.192.70.24
169.254.0.0/16 dev eth0 scope link
default via 10.192.70.1 dev eth0
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
