hi,
i was in mistake with my config...
so now, i ''ve got 2 nics:
eth0 192.168.1.10 gw 192.168.1.1
eth1 192.168.2.20 gw 192.168.2.1
---Router(VLAN)----
l l
l l
eth0---Dom0-----eth1
l l
l Dom1-----eth0
l
l------eth0--Dom2
l
l------eth0--Dom3
==========================# cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto xenbr0
iface xenbr0 inet static
address 192.168.1.10
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
bridge_ports eth0
# optional
bridge_maxwait 0
auto xenbr0
iface xenbr0 inet static
address 192.168.2.20
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
bridge_ports eth0
# optional
bridge_maxwait 0
============================# cat /etc/xen/xend-config.sxp
(xend-relocation-hosts-allow ''^localhost$
^localhost\\.localdomain$'')
(network-script network-bridge)
(vif-script vif-bridge)
(dom0-min-mem 196)
(dom0-cpus 0)
(vncpasswd '''')
==============================# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:FE:6D:F4:E5
inet6 addr: fe80::20f:feff:fe6d:f4e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:55205 errors:0 dropped:0 overruns:0 frame:0
TX packets:3464 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:11382549 (10.8 MiB) TX bytes:725505 (708.5 KiB)
Base address:0x2100 Memory:f0500000-f0520000
eth1 Link encap:Ethernet HWaddr 00:13:F7:0B:A9:5C
inet6 addr: fe80::213:f7ff:fe0b:a95c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:135269 errors:0 dropped:0 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:39981510 (38.1 MiB) TX bytes:1588 (1.5 KiB)
Interrupt:19 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:21 errors:0 dropped:0 overruns:0 frame:0
TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2376 (2.3 KiB) TX bytes:2376 (2.3 KiB)
vif8.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:28659 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:496 (496.0 b) TX bytes:6112602 (5.8 MiB)
xenbr0 Link encap:Ethernet HWaddr 00:0F:FE:6D:F4:E5
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20f:feff:fe6d:f4e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30636 errors:0 dropped:0 overruns:0 frame:0
TX packets:717 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6003035 (5.7 MiB) TX bytes:135514 (132.3 KiB)
xenbr1 Link encap:Ethernet HWaddr 00:13:F7:0B:A9:5C
inet addr:192.168.2.20 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::213:f7ff:fe0b:a95c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:82384 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22305870 (21.2 MiB) TX bytes:720 (720.0 b)
============================================# brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.000ffe6df4e5 no eth0
vif8.0
xenbr1 8000.0013f70ba95c no eth1
===========================================
i can ping my 2 nics on Dom0: 192.168.1.10 and 192.168.2.20
on my Dom1, i put
# grep vif /etc/xen/test0.cfg
vif = [ ''ip=192.168.2.200,bridge=xenbr1'' ]
#cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.2.200
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
---------
but on my Dom1, i can''t ping anything with the subnet 192.168.2.x
if i define my DomU with the subnet 192.168.1.x (like the eth0
interface of Dom0), i can ping anything.
so how could i configure my Dom1 to use the eth1 interfaceof Dom0 to
go outside (192.168.2.x with gateway 192.168.2.1) instead of the
gaetway192.168.1.1 ?
thank you in adavance for your help.
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users