Hi,
At first glance, this appears to be a fairly simple routing issue,
but I''ve checked the configuration and am a bit mystified. I am using
Xen 3.0.2 here in bridged networking mode.
Firstly - four servers.
Dom0 - 75.126.2.202 (RHEL4)
domU (CentOS) - 75.126.3.248 -> 75.126.3.251
Dom0, .248, & .249 can all talk to each other okay (& the outside world)
However, for some inexplicable reason, .250 cannot talk to .249, or
vice versa, yet .250 can ping the other VMs & Dom0 without any issue.
---
# ping 75.126.3.249
PING 75.126.3.249 (75.126.3.249) 56(84) bytes of data.
From 75.126.3.250 icmp_seq=0 Destination Host Unreachable
From 75.126.3.250 icmp_seq=1 Destination Host Unreachable
From 75.126.3.250 icmp_seq=2 Destination Host Unreachable
---
I can ping .250 from .248, but not from Dom0, or any other VMs.
/etc/sysconfig/network-scripts/ifcfg-eth0
----
TYPE=Ethernet
DEVICE=eth0
IPADDR=75.126.3.250
NETMASK=255.255.255.240
NETWORK=75.126.3.240
BROADCAST=75.126.3.255
BOOTPROTO=none
ONBOOT=yes
USERCTL=no
ip route add default dev eth0
---
All the other VMs have similar settings to the above, with the only
difference being IPADDR.
Dom0
---
DEVICE=eth1
BOOTPROTO=static
IPADDR=75.126.2.202
GATEWAY=75.126.2.201
NETMASK=255.255.255.248
ETHTOOL_OPTS="autoneg off speed 100 duplex full"
---
Thoughts? As I remarked at the start, this SEEMS to be a routing
issue, but the IP configuration seems to check out okay.
Y.
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
