Nut upsuser - Jul 2018 - No run cmd /usbhid-ups -k !

Hi all.

UPS is Eaton 5SC 500i.

I tested three solutions:

1. swap "usbhid-ups -a qnapups" with "usbhid-ups -a qnapups
-k"
Result: server shutdown, but ups does not shut off!
2. run prog with params "upsmon -c fsd"
Result: server shutdown, but ups does not shut off!
3. run prog "upscmd -u name -p passwd qnapups shutdown.return"
   and next "shutdown".
Result: server shutdown, but ups does shut off! UPS immediately ON after
power up.

I changed the ups in the following way:
Set with upsrw: ups.delay.shutdown=60
Set with upsrw: ups.delay.start=90
Set with upsrw: ups.start.auto=no
Set with upsrw: ups.start.auto=no
Set with upsrw: ups.start.battery=no
Set with upsrw: ups.start.reboot=no

Please do not know how to write some parameters permanently to UPS?

Sorry but I'm over Mailing lists not works!

Thx Jan.

On Tue, 3 Jul 2018, rakoi at mail.telekom.sk wrote:
> UPS is Eaton 5SC 500i.
> Please do not know how to write some parameters permanently to UPS?
Read man ups.conf and man usbhid-ups and try setting the required values in 
ups.conf.  For example

[Eaton]
         driver = usbhid-ups
         port = auto
         desc = "Eaton 5sc 500i"
         offdelay = 30
         ondelay = 40
         lowbatt = 37

Roger

Set with upsrw: ups.delay.shutdown=60 is the same as offdelay = 30. 
This time was done correctly by UPS.

Set with upsrw: ups.delay.start=90 is the same as ondelay = 40.
The UPS shut down and reset and forget about the settings.

If I use the program in Win 10 settings in the program from Eaton are stable!?

Jan.
> -----Original Message-----
> From: Nut-upsuser <nut-upsuser-bounces+icingaj=gmail.com at alioth-
> lists.debian.net> On Behalf Of Roger Price
> Sent: Tuesday, July 3, 2018 4:05 PM
> To: nut-upsuser Mailing List <nut-upsuser at lists.alioth.debian.org>
> Subject: Re: [Nut-upsuser] No run cmd /usbhid-ups -k !
> 
> On Tue, 3 Jul 2018, rakoi at mail.telekom.sk wrote:
> 
> > UPS is Eaton 5SC 500i.
> > Please do not know how to write some parameters permanently to UPS?
> 
> Read man ups.conf and man usbhid-ups and try setting the required values
> in ups.conf.  For example
> 
> [Eaton]
>          driver = usbhid-ups
>          port = auto
>          desc = "Eaton 5sc 500i"
>          offdelay = 30
>          ondelay = 40
>          lowbatt = 37
> 
> Roger
> 
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser