search for: 500i

Hi all. UPS is Eaton 5SC 500i. I tested three solutions: 1. swap "usbhid-ups -a qnapups" with "usbhid-ups -a qnapups -k" Result: server shutdown, but ups does not shut off! 2. run prog with params "upsmon -c fsd" Result: server shutdown, but ups does not shut off! 3. run prog "upscmd -u name...

Hi I have the following UPS : ups.mfr: Eaton ups.model: POWERWARE UPS 500i ups.power.nominal: 500 It is using the bcmxcp_usb driver. I started the driver with debug options, and noticed the following for the meter map : 0.475625 0027 0000 51 output.frequency 0.475634 0028 0004 51 input.frequency 0.475641 0033 0008 51...

...n values from UPS bcmxcp: Add handling of BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST bcmxcp: Use defined constants in setvar, and handle BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST bcmxcp: Only calculate ups.load if the UPS does not report it directly I have tested my changes on my "POWERWARE UPS 500i", also known as "PW5110". Here is the output from "upsc" : ambient.temperature.high: 221 ambient.temperature.low: 30 battery.charge.low: 11 battery.voltage: 13.5 battery.voltage.low: 10 device.mfr: Eaton device.model: POWERWARE UPS 500i device.part: 103004261-5591 device.se...

...does report remaining runtime. I don't how how accurate it is, but the LS3 software allows to configure a shutdown time required by OS. Can I configure nut to shut down a few minutes earlier? battery.charge: 93 battery.runtime: 1693 battery.voltage: 12.71 device.mfr: Eaton device.model: PW5115 500i device.serial: XcensoredX device.type: ups driver.name: bcmxcp driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyu0 driver.version: 2.6.1 driver.version.internal: 0.24 [current input/output] ups.beeper.status: enabled ups.firmware: Cont:01.00 Inve:10.04 ups.load: 20.4 ups.mfr: Eaton...

tisdagen den 2 juli 2013 20.24.47 skrev Alf H?gemark: > Hi > Hi Alf, > I have the following UPS : > ups.mfr: Eaton > ups.model: POWERWARE UPS 500i > ups.power.nominal: 500 > > It is using the bcmxcp_usb driver. > > I started the driver with debug options, and noticed the following for > the meter map : > > 0.475625 0027 0000 51 output.frequency > 0.475634 0028 0004 51 input.f...

Hi I had to close pull request 33, due to misspelling of commit messages. Charles helped me to fix it, and I have made a new pull request. The new pull request is : https://github.com/networkupstools/nut/pull/35 Regards Alf

On Tue, 3 Jul 2018, rakoi at mail.telekom.sk wrote: > UPS is Eaton 5SC 500i. > Please do not know how to write some parameters permanently to UPS? Read man ups.conf and man usbhid-ups and try setting the required values in ups.conf. For example [Eaton] driver = usbhid-ups port = auto desc = "Eaton 5sc 500i" offdelay = 30...

...Behalf Of Roger Price > Sent: Tuesday, July 3, 2018 4:05 PM > To: nut-upsuser Mailing List <nut-upsuser at lists.alioth.debian.org> > Subject: Re: [Nut-upsuser] No run cmd /usbhid-ups -k ! > > On Tue, 3 Jul 2018, rakoi at mail.telekom.sk wrote: > > > UPS is Eaton 5SC 500i. > > Please do not know how to write some parameters permanently to UPS? > > Read man ups.conf and man usbhid-ups and try setting the required values > in ups.conf. For example > > [Eaton] > driver = usbhid-ups > port = auto > desc = &quot...

Good day. Can not perform shutdowns Ups. Please help. Details of our installation are: OS: Turris Omnia (TO) NUT version: 2.7.4-5 Installation method: from package UPS device: EATON UPS 5SC 500i , 230V, 350W, 500VA, USB bought in jun 2018 If you connect to TO UPS via USB, the /dev/hidraw0 device will be created. No any programs from NUT package is not running. When I run: /lib/nut/usbhid-ups -a qnapups Network UPS Tools - Generic HID driver 0.41 (3.10-76-gd2caa7d) USB communication drive...

=?ISO-8859-1?Q?Alf_H=F8gemark?= <alf at i100.no> writes: > I am working on improving the bcmxcp driver, to add more data reported > from the driver, and also add support for sending more commands to the ups. > The code changes are currently not part of any release, but they are in > github, and some more are on the way. > Would you be able to do some testing on your HP R3000

On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: > On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > >> Hi there, >> >> OS: (L)ubuntu 12.04 precise LTS >> Nut: 2.6.3-1ubuntu1.1 >> Installation Method: Package (apt-get install nut) >> Hardware: HP R1500 G3 INT > > FYI: > I have a different UPS, a HP R3000 XR and I monitor

On 01/07/2018 11.53, icingaj at gmail.com wrote: > Good day. > > Can not perform shutdowns Ups. Please help. > > Details of our installation are: > OS: Turris Omnia (TO) > NUT version: 2.7.4-5 > Installation method: from package > UPS device: EATON UPS 5SC 500i , 230V, 350W, 500VA, USB bought in jun 2018 > > If you connect to TO UPS via USB, the /dev/hidraw0 device will be created. > No any programs from NUT package is not running. > > When I run: > /lib/nut/usbhid-ups -a qnapups > Network UPS Tools - Generic HID driver 0.41 (3.10-7...

...tev(2, [{"Can't claim USB device [0463:fff"..., 62}, {NULL, 0}], 2Can't claim USB device [0463:ffff]: No such file or directory ) = 62 exit_group(1) = ? +++ exited with 1 +++ Why? My ups is: [qnapups] driver = usbhid-ups port = auto desc = Eaton 5SC 500i vendorid = 0463* serial = G131F50027 synchronous = no pollonly pollfreq = 10 nolock -----Original Message----- From: icingaj at gmail.com <icingaj at gmail.com> Sent: Monday, July 2, 2018 8:40 AM To: 'nut-upsuser at alioth-lists.debian.net' <nut-upsuser at alioth-lists.deb...

On Jul 2, 2013, at 5:16 PM, Kjell Claesson wrote: >> I hope other people can also test this. >> >> Regards >> Alf Hogemark > > Due to some crashes on the disks and lack of time I don't have the git on the > pc now. But maybe some other can commit this. I'd like to ask people to specifically try the bcmxcp branch on GitHub - it includes some changes