Nut upsuser - Mar 2007 - upsmon keeps broadcasting on battery / on power (driver is newhidups)

Hi,

I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB
port under Linux Red Hat 4 Upd 4.

I have compiled and installed the usb driver (make usb && make
install-usb). I
followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the
/etc/udev/rules.d/025_nut-usbups.rules.

The ups is recognized by the kernel:
Mar 12 14:52:03 serveur1 kernel: usb 4-1: new low speed USB device using address
8
Mar 12 14:52:03 serveur1 kernel: usbhid: probe of 4-1:1.0 failed with error -5

Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5)

Detected a UPS: MGE UPS SYSTEMS/PULSAR M
Using subdriver: MGE HID 1.0

upsc pulsar@localhost reports:
[root@serveur1.sassine.eu rules.d]# upsc pulsar@localhost
battery.charge: 100
battery.charge.low: 20
battery.charge.restart: 0
battery.runtime: 1923
battery.type: PbAc
battery.voltage: 81.0
driver.name: newhidups
driver.parameter.offdelay: 180
driver.parameter.ondelay: 30
driver.parameter.port: auto
driver.version: 2.0.5
driver.version.data: MGE HID 1.0
driver.version.internal: 0.30
input.frequency: 50.0
input.voltage: 232.0
outlet.0.desc: Main Outlet
outlet.0.id: 0
outlet.0.switchable: yes
outlet.1.autoswitch.charge.low: 0
outlet.1.delay.shutdown: 2147483648
outlet.1.delay.start: 3
outlet.1.desc: PowerShare Outlet 1
outlet.1.id: 1
outlet.1.status: on
outlet.1.switchable: yes
outlet.2.autoswitch.charge.low: 0
outlet.2.delay.shutdown: 2147483648
outlet.2.delay.start: 6
outlet.2.desc: PowerShare Outlet 2
outlet.2.id: 2
outlet.2.status: on
outlet.2.switchable: yes
output.current: 1.90
output.frequency: 50.0
output.voltage: 231.0
output.voltage.nominal: 72.0
ups.beeper.status: enabled
ups.delay.shutdown: 0
ups.delay.start: 0
ups.load: 16
ups.mfr: MGE UPS SYSTEMS
ups.model: Pulsar M 2200
ups.power.nominal: 2200
ups.serial: AQ1G4103Y
ups.status: OL CHRG
ups.test.interval: 604800
ups.test.result: Done and passed

ups.conf is:
[root@serveur1.sassine.eu rules.d]# cat /etc/ups/ups.conf
# UPS Conf for NUT
[pulsar]
        driver=newhidups
        port=auto
        desc="Pulsar M2200 RT3U"
        # vendorid=0463
        # offdelay = 180 s
        offdelay=180
        # ondelay = 30 x 10 = 300 s
        ondelay=30


Howerver starting upsmon keeps reporting:

Mar 12 16:19:46 serveur1 upsmon[20453]: UPS pulsar@localhost on line power
Mar 12 16:19:46 serveur1 wall[20501]: wall: user ups broadcasted 1 lines (36
chars)
Mar 12 16:19:51 serveur1 upsmon[20453]: UPS pulsar@localhost on battery
Mar 12 16:19:51 serveur1 wall[20506]: wall: user ups broadcasted 1 lines (33
chars)
Mar 12 16:20:01 serveur1 upsmon[20453]: UPS pulsar@localhost on line power
Mar 12 16:20:01 serveur1 wall[20509]: wall: user ups broadcasted 1 lines (36
chars)

Thanks for your help

Marc Rechte

> ups.conf is:
> [root@serveur1.sassine.eu rules.d]# cat /etc/ups/ups.conf
> # UPS Conf for NUT
> [pulsar]
>         driver=newhidups
>         port=auto
>         desc="Pulsar M2200 RT3U"
>         # vendorid=0463
>         # offdelay = 180 s
>         offdelay=180
>         # ondelay = 30 x 10 = 300 s
>         ondelay=30
Try if adding 'pollfreq = 5' to the helps.

Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57

salut Marc,

2007/3/12, marc2@rechte.fr <marc2@rechte.fr>:
> ...
> Howerver starting upsmon keeps reporting:
>
> Mar 12 16:19:46 serveur1 upsmon[20453]: UPS pulsar@localhost on line power
> Mar 12 16:19:46 serveur1 wall[20501]: wall: user ups broadcasted 1 lines
(36
> chars)
> Mar 12 16:19:51 serveur1 upsmon[20453]: UPS pulsar@localhost on battery
> Mar 12 16:19:51 serveur1 wall[20506]: wall: user ups broadcasted 1 lines
(33
> chars)
> Mar 12 16:20:01 serveur1 upsmon[20453]: UPS pulsar@localhost on line power
> Mar 12 16:20:01 serveur1 wall[20509]: wall: user ups broadcasted 1 lines
(36
> chars)
can you also try the following, after having fully stopped nut components:
start newhidups in debug mode:
$ newhidups -DDD -a pulsar

and send me back the output.

Arnaud
-- 
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/

Hello Arjen,

Thanks for your suggestions. I set the pollfreq = 5 and pollinterval = 20 in
ups.conf. It has helped to reduce the frequency of broadcast messages but not
fully. I have attached a log that you can see the frequency.

Many thanks.
Marc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: messages
Type: application/octet-stream
Size: 2205 bytes
Desc: not available
Url :
http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20070314/ba495a01/messages.obj