search for: broadcasted

I have DHCP and TFTP on a Solaris machine, pxelinux.0 loads, but it can't load the configuration file. The tftp server on Solaris tries to send the file, but data transfers do not receive ACKs. Previous posts to this list have indicated that the suspect was the PXE BIOS (ref "PXELinux can't load the config file?" dated March 20, 2003). Does that still appear to be the case

Hi all Can someone explain me this: ifcfg-eth0-range1: ONBOOT="yes" IPADDR_START="192.168.1.48" IPADDR_END="192.168.1.55" CLONENUM_START="1" Why Bcast is 192.168.1.51 and why Mask is 255.255.255.252 ? OS: Centos 6.3/64bit Thanks Levi # ifconfig eth0:1 Link encap:Ethernet HWaddr 00:9C:02:99:FA:00 inet addr:192.168.1.48

Dear I need create second bridge xenbr1 for separate traffic between my virtual machine , I following this step but show message that Link veth0 is missing, how I can create veth0 ? When I run script for create xenbr1 ./network-bridge netdev=eth1 bridge=xenbr1 start Shwo this message Link veth0 is missing. This may be because you have reached the limit of the number of interfaces that the

Hello All, I'm trying to figure out why xen-utils-common 3.2 doesn't suport bridging on multiple interfaces. I've been digging around /etc/xen/scripts/network-bridges. And modified it so that during boot, when executed the script writes into /tmp/netbr file, but I commented out code that actually creates bridges. I discovered that this script is called three times during boot, I

With LLVM 3.8 the JIT compiler engine generates an AVX512 instruction although I target an 'avx2' CPU (intel Core I7). I just downloaded the most recent 3.8 and still it happens. It happens with this input module: target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128" define void @module_cFFEMJ(i64 %lo, i64 %hi, i64 %myId, i1 %ordered, i64 %start, i32* noalias align 32

Hi I am not sure if this issue has been resolved, but on the latest opus 1.1.4, * I downloaded the tarball, * ran ./configure followed by * make and then * make check Can you please help? Thank you make[3]: Entering directory `/prj/avspw/karthikr/Development/BFamily/Broadcast/SDM845/Opus/opus-1.1.4/doc' doxygen Warning: ignoring unsupported tag

Thanks for this answer. As I understood, for example if parameter bind interfaces only = yes is and interfaces = lan0 (192.168.0.254) is and if broadcast packet goes from 95.95.95.14 such packet will be dropped (in other words) ? Am I right ? And other thing. Why is 192.168.0.255 (network broadcast) opened for ? May be exact such address (network broadcast) is inbtended for receiving broadcasts

We have 4 class C networks, 199.129.206.* 199.129.207.* 199.129.208.* 199.129.209.* I see IP addresses from all 4 classes thru tcpdump. Some of these computers broadcast as C-class computers; eg, to 199.129.206.255 Some broadcast to 255.255.255.255 Of course, several C class networks would induce me to use a B-class broadcast, 199.129.255.255 This works for the computers I

Hi folks, Has anyone out there done port forwarding or DNAT for UDP packets that are normally sent to the broadcast address (255.255.255.255)? I have to support a nasty database application called FileMaker Pro (those of you who know it are probably groaning about now), which uses broadcasts to locate the database server. Theoretically, i can get around this requirement by using LDAP lookups

I'm having trouble with my samba implementation and have determined it's broadcast addresses are not matching. but just figuring out what win2000 is using for it's broadcast hasnt been so easy. I'm using 10.11/16. the server is at 10.11.0.2 with broadcast 10.11.255.255. the clients get 10.11.2.* from dhcp which also is also set to tell them to use 10.11.255.255 for

Hi all, I'm sending this to both lists because I want to know what both sides of the conversation think about this. For those of you on the icecast list, can I have a recommendation on the right tool to broadcast with? If you like, I'll send you my prerecorded shows, just tell me what the best way to send those is. For the audacity list now, would it be possible to develop a broadcasting

Hello Everyone, I am relatively new to linux and Samba and I am having some difficulties setting Samba up as a Primary Domain Controller. Ihave read the Pdf document called "Using Samba as a PDC" by developrWorks and I have read most of the Howto documents relating to Samba. When I try to connect to my samba server with Win98se I get the message "no Domain server was able to

On 06/23/2016 12:56 PM, Craig Topper wrote: > Can you check what value "getHostCPUName" returned? getHostCPUName() = skylake > > On Thu, Jun 23, 2016 at 9:53 AM, Frank Winter via llvm-dev > <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: > > With LLVM 3.8 the JIT compiler engine generates an AVX512 > instruction although I

Hello, I got Xen working on my machine using the packages that come with Fedora Core 4, but I got one problem: broadcast packages sent from Domain-0 will not reach the guest os. The rest seems to work perfectly. broadcast from guest reaches LAN. broadcast from LAN(but not Domain-0) reaches guest. Does anybody know how to get this working? Thorsten.

Hi, I''ve setup a box with xen. For the root machine, it''s ok, it see the network card: alian@yoda:~> /sbin/lspci ... 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller (rev 19) alian@yoda:~> lsmod .... sk98lin 208748 1 alian@yoda:~> /sbin/ifconfig eth0 Lien encap:Ethernet HWaddr 00:15:F2:39:D4:DF

Hallo everyone in the Icecast project. First of all i want to apologize in case this message should not be in this list but i believe this is the place to answer my question. I know only a little about icecast server. I would like to build up a live radio station. The concept is something like : the server is set up in some place and all producers broadcast themselves from their place, so

An HTML attachment was scrubbed... URL: http://rubyforge.org/pipermail/eventmachine-talk/attachments/20071018/a54f2b61/attachment.html

...will have a broadcast server (bcs). * this bcs will have various soundcards (n +1 -> N speakers + 1 final mix) * the output of each soundcard is put into the analog mixer. * the remote clients will send the signal to the bcs (through liveice?) . * these channels will be received by bcs (and not broadcasted) and will output them to the analog mixer (one channel per soundcard). * The local speaker (or producer) will mix all and will send the results to the bcs. * the result will be broadcasted ... right? More doubts: - about soundcards: are important terms like "latency 0"?or MP3 decoding...

Hi from spain! (sorry, I speak only a little english) I collaborate with an spanish NGO and we're planning to set up an Internet radio station. I would like to base our project on linux and Icecast / liveice (right?) but I don't understand some terms of "radio" practices. I need your experience&help; the project should cover the following scenarios: * A broadcast server

Dear, I would like build lldb on linux but i fail, (thanks for any help): 1/ get llvm3.0 2/ get clang.3.0 and put it into llvm/tools/ 3/ checkout lldb rev 144573 put into llvm/tools/ build --------------------------------- $ ./configure --disable-assertions \ --enable-debug-runtime \ --enable-jit \ --enable-libffi \ --enable-shared $ make REQUIRES_RTTI=1 VERBOSE=1