Lawrence, Peter via llvm-dev
2016-Jul-12 01:45 UTC
[llvm-dev] IPRA, interprocedural register allocation, question
Vivek, Here’s the way I see it, let me know if you agree or disagree, You cannot optimize a function’s calling convention (register-usage) unless You can see and change every caller, and you only know this for non-static functions if you know that all calls to external functions cannot call back into the current compilation unit. #1 gives you the info necessary to change the call-site to the external function So you don’t need #2 to do RA around the call-site to the external function, instead You need #2 before you can change any non-static function’s calling convention within the current compilation unit, assuming you have this information for all external functions. To be more concrete, let foo() be a non-static function in the current compilation Unit, any calls to foo() from external functions will have to use the “default” Calling convention, so foo’s calling convention cannot be changed. We have to Know that none of the external functions can call-back to the compilation unit (they are “leaf” functions relative to the compilation unit) before we can change Foo()’s calling convention. Also, the issue of escaping-pointer-to-function is made clear by the example Of the atexit() and exit() library functions, IE even static functions can end up Being called by external functions. So exit() can never be declared “leaf”, and To get the benefit of IPRA it needs to be within the compilation unit, either By whole-program compilation or by LTO, if it is used. --Peter. From: vivek pandya [mailto:vivekvpandya at gmail.com] Sent: Friday, July 08, 2016 9:26 PM To: Lawrence, Peter <c_plawre at qca.qualcomm.com> Cc: llvm-dev <llvm-dev at lists.llvm.org>; llvm-dev-request at lists.llvm.org; Hal Finkel <hfinkel at anl.gov>; Tim Amini Golling <mehdi.amini at apple.com> Subject: Re: Re:[llvm-dev] IPRA, interprocedural register allocation, question On Sat, Jul 9, 2016 at 8:15 AM, Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> wrote: Vivek, IIUC it seems that we need two pieces of information to do IPRA, 1. what registers the callee clobbers 2. what the callee does to the call-graph Yes I think this is enough, but in your case we don't require #2 And it is #2 that we are missing when we define an external function, Even when we declare it with a preserves or a regmask attribute, Because I think once we have effect of attribute at IR/MI level then we can just parse it and populate register usage information vector for declared function and then we can propagate reg mask on each call site encountered. But I am not user will it be easy to get new attribute working or we may need to hack clang for that too. I would also like to have thoughts from my mentors (Mehdi Amini and Hal Finkel) about this. So what I / we need is another attribute that says this is a leaf function, At least in my case all I’m really concerned with are leaf functions I am stating with a simple function declaration which have a custom attribute. -Vivek Thoughts ? --Peter Lawrence. From: vivek pandya [mailto:vivekvpandya at gmail.com<mailto:vivekvpandya at gmail.com>] Sent: Friday, July 08, 2016 10:24 AM To: Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> Cc: llvm-dev <llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>; llvm-dev-request at lists.llvm.org<mailto:llvm-dev-request at lists.llvm.org> Subject: Re: Re:[llvm-dev] IPRA, interprocedural register allocation, question On Fri, Jul 8, 2016 at 1:42 PM, vivek pandya <vivekvpandya at gmail.com<mailto:vivekvpandya at gmail.com>> wrote: On Fri, Jul 8, 2016 at 9:47 AM, Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> wrote: Vivek, I am looking into these function attributes in the clang docs Preserve_most Preserve_all They are not available in the 3.6.2 that I am currently using, but I hope they exist in 3.8 These should provide enough info to solve my problem, at the MC level calls to functions with these attributes with be code-gen’ed through different “calling conventions”, and CALL instructions to them should have different register USE and DEF info, Yes I believe that preserve_most or preserve_all should help you even with out IPRA. But just to note IPRA can even help further for example on X86 preserve_most cc will not preserve R11 (this can be verified from X86CallingConv.td and X86RegisterInfo.cpp) how ever IPAR calculates regmask based on the actual register usage and if procedure with preserve_most cc does not use R11 and none callsite inside of function body then IPRA will mark R11 as preserved. Also IPRA produces RegMask which is super set of RegMask due to calling convention. I believe that __attribute__ ((registermask = ....)) can provide more flexibility compare to preserve_all or preserve_most CC in some case. So believe that we should try it out. -Vivek This CALL instruction register USE and DEF info should already be useful to the intra-procedural register allocator (allowing values live across these calls to be in what are otherwise caller-save registers), at least that’s how I read the MC dumps, every call instruction seems to have every caller-save register flagged as “imp-def”, IE implicitly-defined by the instruction, and hopefully what is considered a caller-save register at a call-site is defined by the callee. And this should be the information that IPRA takes advantage of in its bottom-up analysis. Yes that is expected help from IPRA. Which leads me to this question, when compiling an entire whole program at one time, so there is no linking and no LTO, will there ever be IPRA that works within LLC for this scenario, and is this an objective of your project, or are you focusing only on LTO ? The current IPRA infrastructure works at compile time so it's scope of optimization is restricted to a compilation unit. So IPRA can only construct correct register usage information if the procedure's code is generated by same compiler instance that means we can't optimize library calls or procedure defined in other module. This is because we can't keep register usage information data across two different compiler instance. Now if we consider LTO, it eliminates above limitation by making a large IR module from smaller modules before generating code and thus we can have register usage information (at lest) for procedure which was previously defined in other module, because now with LTO every thing is in one module. So that also clarifies that IPRA does not do anything at link time. Now coming to LLC, it can use IPRA and optimize for functions defined in current module. So yes while compiling whole program ( a single huge .bc file) IPRA can be used with LLC. Also just note that if a software is written in separate files per module (which is very common) and still you want to maximize benefits of IPRA, then we can use llvm-link tool to combine several .bc files to produce a huge .bc file and use that with LLC to get maximum benefits. I know this is not the typical “linux” scenario (dynamic linking of not only standard libraries, but also sometimes even application libraries, and lots of static linking because of program size), but it is a typical “embedded” scenario, which is where I am currently. I don't understand this use case but we can have further improvement in IPRA for example if you have several libraries which has already compiled and codegen, but you are able to provide information of register usage for the functions of that libraries than we can think about an approach were we can store register usage information into a file (which will obviously increase compile time) and use that information across different compiler instances so that we can provide register usage information with out having actual code while compiling. Other thoughts or comments ? I am looking for some ideas that can improve current IPRA. So if you feel anything relevant please let me know we can discuss and implement feasible ideas. Thanks, Vivek --Peter Lawrence. From: vivek pandya [mailto:vivekvpandya at gmail.com<mailto:vivekvpandya at gmail.com>] Sent: Wednesday, July 06, 2016 2:09 PM To: llvm-dev <llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>; llvm-dev-request at lists.llvm.org<mailto:llvm-dev-request at lists.llvm.org>; Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> Subject: Re:[llvm-dev] IPRA, interprocedural register allocation, question Hello Peter, Thanks to pointing out this interesting case. Vivek, I have an application where many of the leaf functions are Hand-coded assembly language, because they use special IO instructions That only the assembler knows about. These functions typically don't Use any registers besides the incoming argument registers, IE they don't Need to use any additional callee-save nor caller-save registers. If inline asm template has specified clobbered list properly than IPRA is able to use that information and it propagates correct register mask (and that also means that skipping clobbers list while IPRA enabled may broke executable) For example in following code: int gcd( int a, int b ) { int result ; /* Compute Greatest Common Divisor using Euclid's Algorithm */ __asm__ __volatile__ ( "movl %1, %%r15d;" "movl %2, %%ecx;" "CONTD: cmpl $0, %%ecx;" "je DONE;" "xorl %%r13d, %%r13d;" "idivl %%ecx;" "movl %%ecx, %%r15d;" "movl %%r13d, %%ecx;" "jmp CONTD;" "DONE: movl %%r15d, %0;" : "=g" (result) : "g" (a), "g" (b) : "ecx" ,"r13", "r15" ); return result ; } IPRA calculates and propagates correct regmask in which it marks CH, CL, ECX .. clobbered and R13, R15 is not marked clobbered as it is callee saved and LLVM code generators also insert spill/restores code for them. Is there any way in your IPRA interprocedural register allocation project that The user can supply this information for external functions ? By external word do you here mean function defined in other module than being used? In that case as IPRA can operate on only one module at time register usage propagation is not possible. But there is a work around for this problem. You can use IPRA with link time optimization enabled because the way LLVM LTO works it creates a big IR modules out of source files and them optimize and codegen it so in that case IPRA can have actual register usage info (if function will be compiled in current module). In case you want to experiment with IPRA please apply http://reviews.llvm.org/D21395 this patch before you begin. -Vivek Perhaps using some form of __attribute__ ? Maybe __attribute__ ((registermask = ....)) ? --Peter Lawrence. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20160712/448cf1e0/attachment.html>
Mehdi Amini via llvm-dev
2016-Jul-12 02:05 UTC
[llvm-dev] IPRA, interprocedural register allocation, question
> On Jul 11, 2016, at 6:45 PM, Lawrence, Peter <c_plawre at qca.qualcomm.com> wrote: > > Vivek, > Here’s the way I see it, let me know if you agree or disagree, > > You cannot optimize a function’s calling convention (register-usage) unless > You can see and change every caller,That’s true only if you want to “downgrade” the guarantees, i.e. if you want to reduce the callee-saved registers. You can freely provide more information to limit the amount of caller-saved registers to a partial list of call-sites, which is in practice changing the “local" calling convention while keeping it compatible with the public one.> and you only know this for non-static functions > if you know that all calls to external functions cannot call back into the current > compilation unit.I’m not sure why you consider calls to external functions and call back? If you don’t see main() (the common case) you don’t need a call to an external function to have a possible call to an externally visible function in the current module.> > #1 gives you the info necessary to change the call-site to the external function > > So you don’t need #2 to do RA around the call-site to the external function, instead > You need #2 before you can change any non-static function’s calling convention > within the current compilation unit, assuming you have this information for all > external functions.If I understand the case you have in mind, it is only when you see the main() function in the current module and you’re trying to prove that an externally visible function could not be called from outside the module basically? It seems to me that this is a bit orthogonal to IPRA: multiple optimizations (IPRA included) work best when functions are deduced local, non-recursive, are not tail called (for IPRA in particular), and don’t have their address taken. The “infer-func-attr” and “globalopt” passes try to do their best to make this happen, especially during LTO. The attribute case that Vivek is adding seems more murky though. — Mehdi> > To be more concrete, let foo() be a non-static function in the current compilation > Unit, any calls to foo() from external functions will have to use the “default” > Calling convention, so foo’s calling convention cannot be changed. We have to > Know that none of the external functions can call-back to the compilation unit > (they are “leaf” functions relative to the compilation unit) before we can change > Foo()’s calling convention. > > > Also, the issue of escaping-pointer-to-function is made clear by the example > Of the atexit() and exit() library functions, IE even static functions can end up > Being called by external functions. So exit() can never be declared “leaf”, and > To get the benefit of IPRA it needs to be within the compilation unit, either > By whole-program compilation or by LTO, if it is used. > > > --Peter. > > > > > > > From: vivek pandya [mailto:vivekvpandya at gmail.com] > Sent: Friday, July 08, 2016 9:26 PM > To: Lawrence, Peter <c_plawre at qca.qualcomm.com> > Cc: llvm-dev <llvm-dev at lists.llvm.org>; llvm-dev-request at lists.llvm.org; Hal Finkel <hfinkel at anl.gov>; Tim Amini Golling <mehdi.amini at apple.com> > Subject: Re: Re:[llvm-dev] IPRA, interprocedural register allocation, question > > > > On Sat, Jul 9, 2016 at 8:15 AM, Lawrence, Peter <c_plawre at qca.qualcomm.com <mailto:c_plawre at qca.qualcomm.com>> wrote: > Vivek, > IIUC it seems that we need two pieces of information to do IPRA, > 1. what registers the callee clobbers > 2. what the callee does to the call-graph > Yes I think this is enough, but in your case we don't require #2 > > And it is #2 that we are missing when we define an external function, > Even when we declare it with a preserves or a regmask attribute, > > Because I think once we have effect of attribute at IR/MI level then we can just parse it and populate register usage information vector for declared function and then we can propagate reg mask on each call site encountered. > But I am not user will it be easy to get new attribute working or we may need to hack clang for that too. > > I would also like to have thoughts from my mentors (Mehdi Amini and Hal Finkel) about this. > So what I / we need is another attribute that says this is a leaf function, > At least in my case all I’m really concerned with are leaf functions > > I am stating with a simple function declaration which have a custom attribute. > > -Vivek > > Thoughts ? > > > --Peter Lawrence. > > > > From: vivek pandya [mailto:vivekvpandya at gmail.com <mailto:vivekvpandya at gmail.com>] > Sent: Friday, July 08, 2016 10:24 AM > To: Lawrence, Peter <c_plawre at qca.qualcomm.com <mailto:c_plawre at qca.qualcomm.com>> > Cc: llvm-dev <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>>; llvm-dev-request at lists.llvm.org <mailto:llvm-dev-request at lists.llvm.org> > Subject: Re: Re:[llvm-dev] IPRA, interprocedural register allocation, question > > > > On Fri, Jul 8, 2016 at 1:42 PM, vivek pandya <vivekvpandya at gmail.com <mailto:vivekvpandya at gmail.com>> wrote: > > > On Fri, Jul 8, 2016 at 9:47 AM, Lawrence, Peter <c_plawre at qca.qualcomm.com <mailto:c_plawre at qca.qualcomm.com>> wrote: > Vivek, > I am looking into these function attributes in the clang docs > Preserve_most > Preserve_all > They are not available in the 3.6.2 that I am currently using, but I hope they exist in 3.8 > > These should provide enough info to solve my problem, > at the MC level calls to functions with these attributes > with be code-gen’ed through different “calling conventions”, > and CALL instructions to them should have different register USE and DEF info, > > Yes I believe that preserve_most or preserve_all should help you even with out IPRA. But just to note IPRA can even help further for example on X86 preserve_most cc will not preserve R11 (this can be verified from X86CallingConv.td and X86RegisterInfo.cpp) how ever IPAR calculates regmask based on the actual register usage and if procedure with preserve_most cc does not use R11 and none callsite inside of function body then IPRA will mark R11 as preserved. Also IPRA produces RegMask which is super set of RegMask due to calling convention. > > I believe that __attribute__ ((registermask = ....)) can provide more flexibility compare to preserve_all or preserve_most CC in some case. So believe that we should try it out. > > -Vivek > > This CALL instruction register USE and DEF info should already be useful > to the intra-procedural register allocator (allowing values live across these > calls to be in what are otherwise caller-save registers), > at least that’s how I read the MC dumps, every call instruction seems to have > every caller-save register flagged as “imp-def”, IE implicitly-defined by the instruction, > and hopefully what is considered a caller-save register at a call-site is defined by the callee. > And this should be the information that IPRA takes advantage of in its bottom-up analysis. > > Yes that is expected help from IPRA. > > Which leads me to this question, when compiling an entire whole program at one time, > so there is no linking and no LTO, will there ever be IPRA that works within LLC for this scenario, > and is this an objective of your project, or are you focusing only on LTO ? > The current IPRA infrastructure works at compile time so it's scope of optimization is restricted to a compilation unit. So IPRA can only construct correct register usage information if the procedure's code is generated by same compiler instance that means we can't optimize library calls or procedure defined in other module. This is because we can't keep register usage information data across two different compiler instance. > > Now if we consider LTO, it eliminates above limitation by making a large IR module from smaller modules before generating code and thus we can have register usage information (at lest) for procedure which was previously defined in other module, because now with LTO every thing is in one module. So that also clarifies that IPRA does not do anything at link time. > > Now coming to LLC, it can use IPRA and optimize for functions defined in current module. So yes while compiling whole program ( a single huge .bc file) IPRA can be used with LLC. Also just note that if a software is written in separate files per module (which is very common) and still you want to maximize benefits of IPRA, then we can use llvm-link tool to combine several .bc files to produce a huge .bc file and use that with LLC to get maximum benefits. > > I know this is not the typical “linux” scenario (dynamic linking of not only standard libraries, > but also sometimes even application libraries, and lots of static linking because of program > size), but it is a typical “embedded” scenario, which is where I am currently. > > I don't understand this use case but we can have further improvement in IPRA for example if you have several libraries which has already compiled and codegen, but you are able to provide information of register usage for the functions of that libraries than we can think about an approach were we can store register usage information into a file (which will obviously increase compile time) and use that information across different compiler instances so that we can provide register usage information with out having actual code while compiling. > > Other thoughts or comments ? > > I am looking for some ideas that can improve current IPRA. So if you feel anything relevant please let me know we can discuss and implement feasible ideas. > > Thanks, > Vivek > > --Peter Lawrence. > > > From: vivek pandya [mailto:vivekvpandya at gmail.com <mailto:vivekvpandya at gmail.com>] > Sent: Wednesday, July 06, 2016 2:09 PM > To: llvm-dev <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>>; llvm-dev-request at lists.llvm.org <mailto:llvm-dev-request at lists.llvm.org>; Lawrence, Peter <c_plawre at qca.qualcomm.com <mailto:c_plawre at qca.qualcomm.com>> > Subject: Re:[llvm-dev] IPRA, interprocedural register allocation, question > > Hello Peter, > > Thanks to pointing out this interesting case. > Vivek, > I have an application where many of the leaf functions are > Hand-coded assembly language, because they use special IO instructions > That only the assembler knows about. These functions typically don't > Use any registers besides the incoming argument registers, IE they don't > Need to use any additional callee-save nor caller-save registers. > > If inline asm template has specified clobbered list properly than IPRA is able to use that information and it propagates correct register mask (and that also means that skipping clobbers list while IPRA enabled may broke executable) > For example in following code: > int gcd( int a, int b ) { > int result ; > /* Compute Greatest Common Divisor using Euclid's Algorithm */ > __asm__ __volatile__ ( "movl %1, %%r15d;" > "movl %2, %%ecx;" > "CONTD: cmpl $0, %%ecx;" > "je DONE;" > "xorl %%r13d, %%r13d;" > "idivl %%ecx;" > "movl %%ecx, %%r15d;" > "movl %%r13d, %%ecx;" > "jmp CONTD;" > "DONE: movl %%r15d, %0;" : "=g" (result) : "g" (a), "g" (b) : "ecx" ,"r13", "r15" > ); > > return result ; > } > IPRA calculates and propagates correct regmask in which it marks CH, CL, ECX .. clobbered and R13, R15 is not marked clobbered as it is callee saved and LLVM code generators also insert spill/restores code for them. > > Is there any way in your IPRA interprocedural register allocation project that > The user can supply this information for external functions ? > By external word do you here mean function defined in other module than being used? In that case as IPRA can operate on only one module at time register usage propagation is not possible. But there is a work around for this problem. You can use IPRA with link time optimization enabled because the way LLVM LTO works it creates a big IR modules out of source files and them optimize and codegen it so in that case IPRA can have actual register usage info (if function will be compiled in current module). > > In case you want to experiment with IPRA please apply http://reviews.llvm.org/D21395 <http://reviews.llvm.org/D21395> this patch before you begin. > > -Vivek > > Perhaps using some form of __attribute__ ? > Maybe __attribute__ ((registermask = ....)) ? > > > --Peter Lawrence.-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20160711/61ce69ae/attachment-0001.html>
Lawrence, Peter via llvm-dev
2016-Jul-12 02:48 UTC
[llvm-dev] IPRA, interprocedural register allocation, question
Mehdi, I’m compiling embedded applications which are small enough to do whole-program-compilation. There’s no advantage in breaking them up into separate compilation pieces and linking them, even though in source form they are composed of a couple of separate source files. So for me the compilation unit is always the entire program (and includes main()) Except for some hand-coded-assembly-language support functions that are “external” to the compilation unit and in my case never call back into the compilation unit, IE they are always “leaf” functions from the point of view of the compilation unit’s call-graph. Hence I would like a clang function attribute that says this function is “leaf” So that IPRA can know that none of the functions it is compiling is ever called From outside this compilation unit. And I apologize to everyone for confusingly using the term “compilation unit” When I meant “whole program”. Yes I am aware of the fact that if you change a function’s calling convention By converting some scratch regs into save regs (for example because they aren’t even touched) Then you are safe to call it from either the default calling convention or the Optimized calling convention. This is the safe thing to do, and is why I will Only use “preserves_most” and “preserves_all” optimized calling conventions, As those will have been implemented by a back-end writer who is aware of All these compilations (as opposed to the “registermask=” calling convention Which is much less safe) I do however feel that IPRA in the whole-program case should not be restricted to Only scratch-becoming-save changes, I don’t have any data to support the notion, But it begs to be investigated, unless someone can somehow prove that it can’t help Performance. --Peter. From: mehdi.amini at apple.com [mailto:mehdi.amini at apple.com] Sent: Monday, July 11, 2016 7:06 PM To: Lawrence, Peter <c_plawre at qca.qualcomm.com> Cc: vivek pandya <vivekvpandya at gmail.com>; llvm-dev <llvm-dev at lists.llvm.org>; llvm-dev-request at lists.llvm.org; Hal Finkel <hfinkel at anl.gov> Subject: Re: [llvm-dev] IPRA, interprocedural register allocation, question On Jul 11, 2016, at 6:45 PM, Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> wrote: Vivek, Here’s the way I see it, let me know if you agree or disagree, You cannot optimize a function’s calling convention (register-usage) unless You can see and change every caller, That’s true only if you want to “downgrade” the guarantees, i.e. if you want to reduce the callee-saved registers. You can freely provide more information to limit the amount of caller-saved registers to a partial list of call-sites, which is in practice changing the “local" calling convention while keeping it compatible with the public one. and you only know this for non-static functions if you know that all calls to external functions cannot call back into the current compilation unit. I’m not sure why you consider calls to external functions and call back? If you don’t see main() (the common case) you don’t need a call to an external function to have a possible call to an externally visible function in the current module. #1 gives you the info necessary to change the call-site to the external function So you don’t need #2 to do RA around the call-site to the external function, instead You need #2 before you can change any non-static function’s calling convention within the current compilation unit, assuming you have this information for all external functions. If I understand the case you have in mind, it is only when you see the main() function in the current module and you’re trying to prove that an externally visible function could not be called from outside the module basically? It seems to me that this is a bit orthogonal to IPRA: multiple optimizations (IPRA included) work best when functions are deduced local, non-recursive, are not tail called (for IPRA in particular), and don’t have their address taken. The “infer-func-attr” and “globalopt” passes try to do their best to make this happen, especially during LTO. The attribute case that Vivek is adding seems more murky though. — Mehdi To be more concrete, let foo() be a non-static function in the current compilation Unit, any calls to foo() from external functions will have to use the “default” Calling convention, so foo’s calling convention cannot be changed. We have to Know that none of the external functions can call-back to the compilation unit (they are “leaf” functions relative to the compilation unit) before we can change Foo()’s calling convention. Also, the issue of escaping-pointer-to-function is made clear by the example Of the atexit() and exit() library functions, IE even static functions can end up Being called by external functions. So exit() can never be declared “leaf”, and To get the benefit of IPRA it needs to be within the compilation unit, either By whole-program compilation or by LTO, if it is used. --Peter. From: vivek pandya [mailto:vivekvpandya at gmail.com] Sent: Friday, July 08, 2016 9:26 PM To: Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> Cc: llvm-dev <llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>; llvm-dev-request at lists.llvm.org<mailto:llvm-dev-request at lists.llvm.org>; Hal Finkel <hfinkel at anl.gov<mailto:hfinkel at anl.gov>>; Tim Amini Golling <mehdi.amini at apple.com<mailto:mehdi.amini at apple.com>> Subject: Re: Re:[llvm-dev] IPRA, interprocedural register allocation, question On Sat, Jul 9, 2016 at 8:15 AM, Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> wrote: Vivek, IIUC it seems that we need two pieces of information to do IPRA, 1. what registers the callee clobbers 2. what the callee does to the call-graph Yes I think this is enough, but in your case we don't require #2 And it is #2 that we are missing when we define an external function, Even when we declare it with a preserves or a regmask attribute, Because I think once we have effect of attribute at IR/MI level then we can just parse it and populate register usage information vector for declared function and then we can propagate reg mask on each call site encountered. But I am not user will it be easy to get new attribute working or we may need to hack clang for that too. I would also like to have thoughts from my mentors (Mehdi Amini and Hal Finkel) about this. So what I / we need is another attribute that says this is a leaf function, At least in my case all I’m really concerned with are leaf functions I am stating with a simple function declaration which have a custom attribute. -Vivek Thoughts ? --Peter Lawrence. From: vivek pandya [mailto:vivekvpandya at gmail.com<mailto:vivekvpandya at gmail.com>] Sent: Friday, July 08, 2016 10:24 AM To: Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> Cc: llvm-dev <llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>; llvm-dev-request at lists.llvm.org<mailto:llvm-dev-request at lists.llvm.org> Subject: Re: Re:[llvm-dev] IPRA, interprocedural register allocation, question On Fri, Jul 8, 2016 at 1:42 PM, vivek pandya <vivekvpandya at gmail.com<mailto:vivekvpandya at gmail.com>> wrote: On Fri, Jul 8, 2016 at 9:47 AM, Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> wrote: Vivek, I am looking into these function attributes in the clang docs Preserve_most Preserve_all They are not available in the 3.6.2 that I am currently using, but I hope they exist in 3.8 These should provide enough info to solve my problem, at the MC level calls to functions with these attributes with be code-gen’ed through different “calling conventions”, and CALL instructions to them should have different register USE and DEF info, Yes I believe that preserve_most or preserve_all should help you even with out IPRA. But just to note IPRA can even help further for example on X86 preserve_most cc will not preserve R11 (this can be verified from X86CallingConv.td and X86RegisterInfo.cpp) how ever IPAR calculates regmask based on the actual register usage and if procedure with preserve_most cc does not use R11 and none callsite inside of function body then IPRA will mark R11 as preserved. Also IPRA produces RegMask which is super set of RegMask due to calling convention. I believe that __attribute__ ((registermask = ....)) can provide more flexibility compare to preserve_all or preserve_most CC in some case. So believe that we should try it out. -Vivek This CALL instruction register USE and DEF info should already be useful to the intra-procedural register allocator (allowing values live across these calls to be in what are otherwise caller-save registers), at least that’s how I read the MC dumps, every call instruction seems to have every caller-save register flagged as “imp-def”, IE implicitly-defined by the instruction, and hopefully what is considered a caller-save register at a call-site is defined by the callee. And this should be the information that IPRA takes advantage of in its bottom-up analysis. Yes that is expected help from IPRA. Which leads me to this question, when compiling an entire whole program at one time, so there is no linking and no LTO, will there ever be IPRA that works within LLC for this scenario, and is this an objective of your project, or are you focusing only on LTO ? The current IPRA infrastructure works at compile time so it's scope of optimization is restricted to a compilation unit. So IPRA can only construct correct register usage information if the procedure's code is generated by same compiler instance that means we can't optimize library calls or procedure defined in other module. This is because we can't keep register usage information data across two different compiler instance. Now if we consider LTO, it eliminates above limitation by making a large IR module from smaller modules before generating code and thus we can have register usage information (at lest) for procedure which was previously defined in other module, because now with LTO every thing is in one module. So that also clarifies that IPRA does not do anything at link time. Now coming to LLC, it can use IPRA and optimize for functions defined in current module. So yes while compiling whole program ( a single huge .bc file) IPRA can be used with LLC. Also just note that if a software is written in separate files per module (which is very common) and still you want to maximize benefits of IPRA, then we can use llvm-link tool to combine several .bc files to produce a huge .bc file and use that with LLC to get maximum benefits. I know this is not the typical “linux” scenario (dynamic linking of not only standard libraries, but also sometimes even application libraries, and lots of static linking because of program size), but it is a typical “embedded” scenario, which is where I am currently. I don't understand this use case but we can have further improvement in IPRA for example if you have several libraries which has already compiled and codegen, but you are able to provide information of register usage for the functions of that libraries than we can think about an approach were we can store register usage information into a file (which will obviously increase compile time) and use that information across different compiler instances so that we can provide register usage information with out having actual code while compiling. Other thoughts or comments ? I am looking for some ideas that can improve current IPRA. So if you feel anything relevant please let me know we can discuss and implement feasible ideas. Thanks, Vivek --Peter Lawrence. From: vivek pandya [mailto:vivekvpandya at gmail.com<mailto:vivekvpandya at gmail.com>] Sent: Wednesday, July 06, 2016 2:09 PM To: llvm-dev <llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>>; llvm-dev-request at lists.llvm.org<mailto:llvm-dev-request at lists.llvm.org>; Lawrence, Peter <c_plawre at qca.qualcomm.com<mailto:c_plawre at qca.qualcomm.com>> Subject: Re:[llvm-dev] IPRA, interprocedural register allocation, question Hello Peter, Thanks to pointing out this interesting case. Vivek, I have an application where many of the leaf functions are Hand-coded assembly language, because they use special IO instructions That only the assembler knows about. These functions typically don't Use any registers besides the incoming argument registers, IE they don't Need to use any additional callee-save nor caller-save registers. If inline asm template has specified clobbered list properly than IPRA is able to use that information and it propagates correct register mask (and that also means that skipping clobbers list while IPRA enabled may broke executable) For example in following code: int gcd( int a, int b ) { int result ; /* Compute Greatest Common Divisor using Euclid's Algorithm */ __asm__ __volatile__ ( "movl %1, %%r15d;" "movl %2, %%ecx;" "CONTD: cmpl $0, %%ecx;" "je DONE;" "xorl %%r13d, %%r13d;" "idivl %%ecx;" "movl %%ecx, %%r15d;" "movl %%r13d, %%ecx;" "jmp CONTD;" "DONE: movl %%r15d, %0;" : "=g" (result) : "g" (a), "g" (b) : "ecx" ,"r13", "r15" ); return result ; } IPRA calculates and propagates correct regmask in which it marks CH, CL, ECX .. clobbered and R13, R15 is not marked clobbered as it is callee saved and LLVM code generators also insert spill/restores code for them. Is there any way in your IPRA interprocedural register allocation project that The user can supply this information for external functions ? By external word do you here mean function defined in other module than being used? In that case as IPRA can operate on only one module at time register usage propagation is not possible. But there is a work around for this problem. You can use IPRA with link time optimization enabled because the way LLVM LTO works it creates a big IR modules out of source files and them optimize and codegen it so in that case IPRA can have actual register usage info (if function will be compiled in current module). In case you want to experiment with IPRA please apply http://reviews.llvm.org/D21395 this patch before you begin. -Vivek Perhaps using some form of __attribute__ ? Maybe __attribute__ ((registermask = ....)) ? --Peter Lawrence. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20160712/925f10ec/attachment-0001.html>
Possibly Parallel Threads
- IPRA, interprocedural register allocation, question
- IPRA, interprocedural register allocation, question
- IPRA, interprocedural register allocation, question
- IPRA, interprocedural register allocation, question
- IPRA, interprocedural register allocation, question