LARTC - May 2004 - Wondershaper - question

Hi,
I have a question conercing wondershaper. I''m using the Clarkconnect
linux
distribution for my linux router and I tried to use wondershaper.

On start up of wshaper, there are no errors or any other problems but
I''m
not sure if it''s running correctly. Only one qdisc / one class is used
and
when I start an uplink ftp transfer, my ping time is growing up to 1700ms -
I don''t think that there is anything shaped oder scheduled.

In the wshaper file I set the up- and downlink values and for the p2p I set
this:
# low priority source ports
NOPRIOPORTSRC=4662

# low priority destination ports
NOPRIOPORTDST=4662


Then i start it:
[root@Astoria bin]# wshaper start
[root@Astoria bin]#

One or two minutes later (with p2p traffic and some pings) i got this:

[root@Astoria bin]# wshaper status
qdisc ingress ffff: ----------------
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

 qdisc sfq 30: quantum 1514b perturb 10sec
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

 qdisc sfq 20: quantum 1514b perturb 10sec
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

 qdisc sfq 10: quantum 1514b perturb 10sec
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

 qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
 Sent 1116535 bytes 6148 pkts (dropped 0, overlimits 0)
  borrowed 0 overactions 0 avgidle 624 undertime 0

 class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
 Sent 1117031 bytes 6154 pkts (dropped 0, overlimits 0)
  borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 120Kbit prio 1
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
  borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 120Kbit (bounded,isolated) prio 5
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
  borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 108Kbit prio 2
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
  borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 96Kbit prio 2
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
  borrowed 0 overactions 0 avgidle 624 undertime 0
[root@Astoria bin]#

As you can see, just qdisc 1: is used. The same behavior after hours of
running wshaper; only this one qdisc is used.

Has anyone an idea why this happens?

Thanks,
Matthias Lendholt
(Berlin, Germany)


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Matthias Lendholt wrote:

Those are port lists, not the line speed. They should be more like

NOPRIOPORTDST="53 21 22"

or similar. Check the docs for more help on it.
> Hi,
> I have a question conercing wondershaper. I''m using the
Clarkconnect linux
> distribution for my linux router and I tried to use wondershaper.
> 
> On start up of wshaper, there are no errors or any other problems but
I''m
> not sure if it''s running correctly. Only one qdisc / one class is
used and
> when I start an uplink ftp transfer, my ping time is growing up to 1700ms -
> I don''t think that there is anything shaped oder scheduled.
> 
> In the wshaper file I set the up- and downlink values and for the p2p I set
> this:
> # low priority source ports
> NOPRIOPORTSRC=4662
> 
> # low priority destination ports
> NOPRIOPORTDST=4662

-- 

http://www.ivanhawkes.com  |  ICQ: 173-392-038

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/