search for: noprioportdst

...art an uplink ftp transfer, my ping time is growing up to 1700ms - I don''t think that there is anything shaped oder scheduled. In the wshaper file I set the up- and downlink values and for the p2p I set this: # low priority source ports NOPRIOPORTSRC=4662 # low priority destination ports NOPRIOPORTDST=4662 Then i start it: [root@Astoria bin]# wshaper start [root@Astoria bin]# One or two minutes later (with p2p traffic and some pings) i got this: [root@Astoria bin]# wshaper status qdisc ingress ffff: ---------------- Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc sfq 30: quantum 1514b...

Season Greetings to all Tom, in your faq, u have this noted: While I am currently using the HTB version of The Wonder Shaper (I just copied wshaper.htb to /etc/shorewall/tcstart and modified it as shown in the Wondershaper README), I treid this with wondershaper, using Bearing Leaf 1.0 stable i even changed the tc command to run_tc, and tried it in both angles, and i receive the following..

...htb to a port range? I have a ftp server on port 65432 and passive ports 50000-60000. Is there a way to set a range? or do they have to be individually listed? The following doesnt seem to work: # low priority source ports NOPRIOPORTSRC=65432, 50000:60000 # low priority destination ports NOPRIOPORTDST= Mark _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

...s from 67.0.192.10: icmp_seq=46 ttl=254 time=45.2 ms 64 bytes from 67.0.192.10: icmp_seq=47 ttl=254 time=44.8 ms And, here''s the shell commands and their output: root@Devil:~ # sh -x wshaper.htb + DOWNLINK=100 + UPLINK=100 + DEV=eth0 + NOPRIOHOSTSRC= + NOPRIOHOSTDST= + NOPRIOPORTSRC= + NOPRIOPORTDST= + ''['' '''' = status '']'' + tc qdisc del dev eth0 root + tc qdisc del dev eth0 ingress + ''['' '''' = stop '']'' + tc qdisc add dev eth0 root handle 1: htb default 20 + tc class add dev eth0 parent 1:...

...IOPORTSRC= + /usr/sbin/xmlstarter setenv tc_hiprioportdst + HIPRIOPORTDST= + /usr/sbin/xmlstarter setenv tc_nopriohostsrc + NOPRIOHOSTSRC= + /usr/sbin/xmlstarter setenv tc_nopriohostdst + NOPRIOHOSTDST= + /usr/sbin/xmlstarter setenv tc_noprioportsrc + NOPRIOPORTSRC= + /usr/sbin/xmlstarter setenv tc_noprioportdst + NOPRIOPORTDST= + [ ppp0 = status ] + [ ppp0 = stop ] + tc qdisc del dev ppp0 root + tc qdisc del dev ppp0 ingress + tc qdisc add dev ppp0 root handle 1: htb default 20 + tc class add dev ppp0 parent 1: classid 1:1 htb rate 320kbit burst 6k + tc class add dev ppp0 parent 1:1 classid 1:10 htb rate...

Hi, When i do ''wshaper start'' the interface i have defined stops routing traffic for some reason. It resumes routing when i do ''wshaper stop''. I''m using debian stable (3.0 woody) with debian''s default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a ''status'', everything looks correct. Can ANYONE

...INK=50 DEV=eth0 # low priority OUTGOING traffic - you can leave this blank if you want # low priority source netmasks NOPRIOHOSTSRC= # low priority destination netmasks NOPRIOHOSTDST= # low priority source ports NOPRIOPORTSRC="4661 4662 4665 4881 4882" # low priority destination ports NOPRIOPORTDST="4661 4662 4665 4881 4882" # Now remove the following two lines :-) #echo Please read the documentation in ''README'' first #exit if [ "$1" = "status" ] then tc -s qdisc ls dev $DEV tc -s class ls dev $DEV exit fi # clean e...

...ath0 The main problem is that browsing is sluggish, but ssh is a bit sluggish too. Bittorrent performance is great though. My bittorrent client is set to listen on port 6881 so I added the following to try and balance it out, but it doesn''t seem to make a difference: NOPRIOPORTSRC=6881 NOPRIOPORTDST=6881 How does my config look? Is there anything else I can do? - Grant ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just d...

...can leave this blank if you want > # low priority source netmasks > NOPRIOHOSTSRC= > > # low priority destination netmasks > NOPRIOHOSTDST= > > # low priority source ports > NOPRIOPORTSRC="4661 4662 4665 4881 4882" > > # low priority destination ports > NOPRIOPORTDST="4661 4662 4665 4881 4882" > > > # Now remove the following two lines :-) > > #echo Please read the documentation in ''README'' first > #exit > > if [ "$1" = "status" ] > then > tc -s qdisc ls dev $DEV >...

...=eth2 DOWNLINKlan=512 UPLINKlan=256 DEVlan=eth1 # low priority OUTGOING traffic - you can leave this blank if you want # low priority source netmasks NOPRIOHOSTSRC= # low priority destination netmasks NOPRIOHOSTDST= # low priority source ports NOPRIOPORTSRC= # low priority destination ports NOPRIOPORTDST= # Now remove the following two lines :-) #echo Please read the documentation in ''README'' first #exit #pipe1 if [ "$1" = "status" ] then tc -s qdisc ls dev $DEV tc -s class ls dev $DEV exit fi # clean existing down- and uplink qdiscs, h...

Hi, I just installed wondershapper 1.1a on my ipcop firewall box. I have roadrunner cable with a ftp server setup. My download speed is 2mbit (I get 225 KBytes) and my upload is 384kbit (I send at 43 KBytes). What should the settings in wshaper? I can ping yahoo.com at 90msec with little traffic.....and at around 220msec with full upload traffic. Mark

I don''t know whether this is the right place to ask, but kindly point me to an FM that I can R if it isn''t. My wife is creating lots of Kazaa traffic, and I am using rsync to create a full mirror of Red Hat''s FTP site, Aurora Linux FTP site, the LDP site, and some other stuff. Clearly, when one is moving well over 100GB over a 128 Kbps link, this is going to take a

Hi there good people, I''m a newbie in what concerns running Linux on machines other than desktops, so I need help from all you gurus out there :-) I have Linux installed on an old computer (Winchip C6, Pentium clone), acting as a router/firewall for two other computers. Both these machines are connected to the firewall via a dedicated ethernet card each, on different subnets,