hello . i have no problem shaping incoming traffic from WAN how do i shape outgoing traffic to WAN depending on the speed limit of each subnet .... ex: 10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD) 10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD) do i have to used forward handle, and used iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101 and used iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102 what do i really have to use? prerouting or postrouting. do i really need to use imq device on this one ? i can''t seem to get it work ..... thanks for anyone can help... :D __________________________________ Do you Yahoo!? The all-new My Yahoo! - Get yours free! http://my.yahoo.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Drink Linux wrote:> hello . > > i have no problem shaping incoming traffic from WAN > > how do i shape outgoing traffic to WAN depending on > the speed limit of each subnet .... > > ex: > 10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD) > 10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD) > > > > do i have to used forward handle, > > and used > iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101 > > and used > iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102 > > what do i really have to use? > prerouting or postrouting. > do i really need to use imq device on this one ? > > i can''t seem to get it work ..... > > thanks for anyone can help...It depends on your exact setup - what interfaces do you have to where? Andy. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Andy Furniss wrote:> Drink Linux wrote: > >> hello . >> >> i have no problem shaping incoming traffic from WAN >> >> how do i shape outgoing traffic to WAN depending on >> the speed limit of each subnet .... >> >> ex: >> 10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD) >> 10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD) >> >> >> >> do i have to used forward handle, >> and used iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101 >> >> and used iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102 >> >> what do i really have to use? prerouting or postrouting. >> do i really need to use imq device on this one ? >> >> i can''t seem to get it work ..... >> >> thanks for anyone can help... > > > It depends on your exact setup - what interfaces do you have to where? >i have eth0 connected to WAN and wlan0 connected to LAN .... i have tried to used postrouting with mark packets but failed .... You don''t need IMQ as long as you only wan''t to shape forwarded traffic. It should work in postrouting, I think your -d WAN is the problem, you need to specify interface -o eth0. As you are marking forwarded traffic you could use forward, and use -i as well as -o eg. iptables -t mangle -I FORWARD -i wlan0 -o eth0 -s 10.10.5.0/24 -j MARK --set-mark 102 Andy. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/