similar to: is this scenario possible ???

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

Hello, I''m trying to get my shaper to work, but have only a partial success. Can someone help me with that. My setup unfortunately is not so trivial, but I think some people could have similar one... 1. There is a router connected to the internet line via interface eth0 2. There are users connected to the router via two interfaces : eth1 and wlan0 3. All users are assigned private IP

Hi, I have typical situation, local LAN with private addresses, translated via NAT to internet. I need to shape ingress traffic (from internet to local LAN) in several HTB queues accorting to destination (private not public) IP. So I need mark packets to divide them to corresponding queue. According to http://www.docum.org/stef.coene/qos/kptd/ I thing I have only one way how to do it, because

Hello everyone... I have a little trouble and need some help :P How can I check on which interface the packet is going (eth0, eth1; I have two ISP and on eth3 little LAN), using to check it TC and IMQ? (HTB script) I tried to mark packets, but on chain POSTROUTING this does not work... Maybe because packets fall on IMQ before signing. I tried marking it on FORWARD but packets also

Hi! I have read all informations i could find, but some things are still not clear. My setup is: ---INTERNET1(eth0)-\ /- Local net1 (eth2) GW ---INTERNET2(eth1)-/ \- Local net2 (eth3) I have NAT and a working setup using HTB,SFQ, classifying with the iptables -j CLASSIFY way. I shape only the traffic coming from the internet heading to the intranet. I would like

Server : eth0 - internet DSL eth1 - LAN wlan0 - wireles LAN I want server to share bandwith from eth0 evenly for users on eth1 and wlan0. How can i make it ? Is it possible ? As far as i know htb splits outgoing bandwith on one device only. ---------------------------------------------------- Grypa? Damy radę! Sprawdź jak jej zapowbiegać, a jeśli już za późno ...jak leczyć - grypa.wp.pl

Hi, my box is connected to 3 networks, eth0 eth1 wlan0. I want "my" traffic to go via wlan0 and everything from eth1 NATed to eth0: eth0 192.168.1.10/24 eth1 172.16.1.1/12 wlan0 192.168.10.190/24 I first tried this with two single hosts: iptables -A POSTROUTING -j MASQUERADE -o eth0 -t nat iptables -A POSTROUTING -j MASQUERADE -o wlan0 -t nat echo 200 Forw >>

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

What''s wrong... I have Celeron 633MHz nd 768Mb RAM. When I''m running my script everything is OK, but when I''m connecting Internet and LAN link computer is hanging. But when i dissconnect this everything is OK. I have 500 users, 1500 classes and 3000 filters. Is it normal? What should I do?

ive got such network: |--------| |-------------| | WORLD |---|ROUTER/server| ------ NATED LAN |--------| |-------------| I want to use imq on ROUTER, what behaviour to choose ? AA, BA, AB, BB ?? --

Hi all and tc Gururs i have patched the IMQ and htb to kernel, but when i do egress filtering, iam not able to see any traffic and excusted the following the commands modprobe imq numdevs=1 tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 1 tc class add dev imq0 parent

Hello, I am using the IMQ with iptables (latest versions) and asking all packets to be enqueued to IMQ0 from both prerouting and postrouting (using different iptables rules to mark different streams). When I do this I get the kernel saying: "Dead loop on netdevice imq0, fix it urgently!" and communications stop intermittently. If I remove the jump from either preroute or postroute it

Dear folks, Here goes my bandwidth manager: INTERNET | |eth0 202.14.41.1 BW.Manager | | | +----eth1----192.168.1.0/24 | +------eth2----192.168.2.0/24 Total incoming bandwidth to eth0 is 1024kbps should be shared to eth1 and eth2, which mean each get 512Kbps and burstable to 1024Kbps if other host is idle. My question is how do i apply HTB to these situation ? As far as i know eth1 and eth2

Hello, I have eth0 - internet eth1..4 - local networks on eth0 i do $IPTABLES -A POSTROUTING -t nat -o eth0 -j MASQUERADE I want to balance out/in load for eth1..4 and localhost (mainly squid). Nat makes impossible to do it on eth0, so I installed IMQ. I need to get to on imq0 unnnated in/out traffic that I could make priorities for protocols and networks. Do somthing like this: prate=1Mbit

Hi I''ve a stupid question. How can I shape upload using IMQ? Instead of putting a rule in iptables in PREROUTING should i use POSTROUTING? And another question is, can I make routing rule based on ip addresses assigned by iptables to an imq device? The idea is, let''s say i have some rules in iptables like: -t mangle -A PREROUTING -s 192.168.0.0/16 -j IMQ --todev 0 Can i route

I''ve followed this list for quite a long time and have even posted a couple of times. I used the early versions of IMQ from Devik (I think that was his name), and it worked well. I only ever got the chance to implement it in my test environment. I now need to implement it in my production environment. My Linux core router has nine interfaces and has a 27 megabit connection to the

i''m trying to limit upload and download but something is wrong(it is about NAT) i will post here my "script" maybe someone could tell me what is wrong my kernel(2.6.9) is patch with imq(linuximq.net) and my iptables(1.2.11) also #flush tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc del dev imq0 root tc qdisc del dev imq1 root ifconfig imq0 down

I am attempting to implement IMQ on a 2.4.31 version kernel with iptables 1.3.3. I am following the example at http://www.linuximq.net/usage.html. When I enter the line iptables -t mangle -A POSTROUTING -o eth1 -j IMQ --todev1 (eth1 is the external interface), the computer slows to a crawl. OK, the CPU is only an AMD K6 233 which is not the world''s greatest CPU, but egress shaping is