George Hartzell
2006-Apr-12 01:48 UTC
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW
drive attached to an Asus A8V-MX motherboard.
When I try to use burncd to burn a cd, it writes all of the data, says
"fixating CD, please wait.." and then reports
burncd: ioctl(CDRIOCFIXATE): Input/output error
Oddly enough, the CD seems to be usable.
I can successfully burn the same file if I use cdrecord.
The system was cvsup-ed a couple of days ago, and the kernel config is
the example SMP file plus "device atapicam" (the error also happened
before adding that device, but cdrecord needed it).
I saw this before in the 6.0 days with older hardware and just assumed
that the drive was wonky.
Is it a known problem?
Is it worth pursuing?
g.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #0: Tue Apr 11 07:26:47 UTC 2006
root@demi.projectbillboard.org:/usr/obj/usr/src/sys/DEMI
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2000.09-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 2147155968 (2047 MB)
avail memory = 2096123904 (1999 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 8251 SATA150 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem
0xfebffc00-0xfebfffff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8251 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at device
16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 22 at device
16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device
16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd880-0xd89f irq 23 at device
16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 22 at
device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: USB2.0 CardReader, rev 2.00/91.44, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8233X> port 0xd400-0xd4ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem
0xfebff400-0xfebff4ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:15:f2:2c:c3:86
pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.1 on pci2
pci4: <ACPI PCI bus> on pcib4
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub5: Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub5: 3 ports with 2 removable, bus powered
ukbd0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1
kbd2 at ukbd0
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 4, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33
ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150
ad6: 286168MB <Seagate ST3300622AS 3.AAE> at ata3-master SATA150
GEOM_MIRROR: Device gm0s1 created (id=3185843744).
GEOM_MIRROR: Device gm0s1: provider ad4s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 activated.
GEOM_MIRROR: Device gm0s1: provider ad4s1 activated.
GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 launched.
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR PX-740A 1.01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB2.0 CF CardReader 9144> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <USB2.0 CBO CardReader 9144> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
Trying to mount root from ufs:/dev/mirror/gm0s1a
Scott Robbins
2006-Apr-12 02:16 UTC
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, Apr 11, 2006 at 06:49:02PM -0700, George Hartzell wrote:> > I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW > drive attached to an Asus A8V-MX motherboard. > > When I try to use burncd to burn a cd, it writes all of the data, says > "fixating CD, please wait.." and then reports > > burncd: ioctl(CDRIOCFIXATE): Input/output error > > Oddly enough, the CD seems to be usable. > > I can successfully burn the same file if I use cdrecord. > > The system was cvsup-ed a couple of days ago, and the kernel config is > the example SMP file plus "device atapicam" (the error also happened > before adding that device, but cdrecord needed it). > > I saw this before in the 6.0 days with older hardware and just assumed > that the drive was wonky. > > Is it a known problem?I don't know if it's known, but I have the identical issue with a plextor CDRW drive. A few others have had it too--it gives that error, but the CD is ok. (There was one other fellow who had the issue, don't remember if it was a Plextor, but in his case, he got the error after 3 or 4 seconds and the CD wasn't successfully burned.) I remember googling for it several months ago, but didn't find any answers.> > Is it worth pursuing?I didn't find it so. I guess this is one of those things where I think, gee I wish someone would fix this but can't see filling out a PR where the how to reproduce is, "Come to my job and try to burn a CD on this one machine." I suspect such a report might not get preferential treatment. :) I don't know if it's a Plextor issue either, I seem to remember people with other drives having the same problem. Of the two machines where I burn CDs, the Plextor one is the one with the problem, the other machine, with some no name drive does't have it. - -- Scott Robbins PGP keyID EB3467D6 ( 1B48 077D 66F6 9DB0 FDC2 A409 FA54 EB34 67D6 ) gpg --keyserver pgp.mit.edu --recv-keys EB3467D6 Angel: I'm weak. I've never been anything else. I wanted to lose myself in you. I know it will cost me my soul, and part of me didn't care. It's not the demon in me that needs killing, Buffy, it's the man. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEPGLt+lTVdes0Z9YRAsnpAKCTsuOhugGakPdx+NZXt7X/D15d/wCdGGjV qY0Q6gwXrIXuZChy9E8fjRI=syX3 -----END PGP SIGNATURE-----
Seán C. Farley
2006-Apr-12 02:24 UTC
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
On Tue, 11 Apr 2006, George Hartzell wrote:> I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW > drive attached to an Asus A8V-MX motherboard. > > When I try to use burncd to burn a cd, it writes all of the data, says > "fixating CD, please wait.." and then reports > > burncd: ioctl(CDRIOCFIXATE): Input/output errorI reported it[1] awhile ago. It stems from how FreeBSD checks the status of the drive and/or how the drive reports back. It used to work with FreeBSD 4, but the manner of how the drive is checked changed with FreeBSD 5+. Se?n 1. http://www.freebsd.org/cgi/query-pr.cgi?pr=83702 -- sean-freebsd@farley.org
Vladimir Botka
2006-Apr-12 07:10 UTC
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
Hello, for me Plextor-750 works well with cdrecord and SCSI emulation (ATAPI/CAM module) http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html#ATAPICAM Plextor is a good choice. Cheers, -vlado D0000000000000000000000000000000 On Tue, 11 Apr 2006, George Hartzell wrote:> > I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW > drive attached to an Asus A8V-MX motherboard. > > When I try to use burncd to burn a cd, it writes all of the data, says > "fixating CD, please wait.." and then reports > > burncd: ioctl(CDRIOCFIXATE): Input/output error > > Oddly enough, the CD seems to be usable. > > I can successfully burn the same file if I use cdrecord. > > The system was cvsup-ed a couple of days ago, and the kernel config is > the example SMP file plus "device atapicam" (the error also happened > before adding that device, but cdrecord needed it). > > I saw this before in the 6.0 days with older hardware and just assumed > that the drive was wonky. > > Is it a known problem? > > Is it worth pursuing? > > g. > > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.1-RC #0: Tue Apr 11 07:26:47 UTC 2006 > root@demi.projectbillboard.org:/usr/obj/usr/src/sys/DEMI > ACPI APIC Table: <A M I OEMAPIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2000.09-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x1<SSE3> > AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> > real memory = 2147155968 (2047 MB) > avail memory = 2096123904 (1999 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 0.3> irqs 0-23 on motherboard > kbd1 at kbdmux0 > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <A M I OEMXSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA 8380 host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > atapci0: <VIA 8251 SATA150 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfebffc00-0xfebfffff irq 21 at device 15.0 on pci0 > ata2: <ATA channel 0> on atapci0 > ata3: <ATA channel 1> on atapci0 > atapci1: <VIA 8251 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0 > ata0: <ATA channel 0> on atapci1 > ata1: <ATA channel 1> on atapci1 > uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at device 16.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 22 at device 16.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <VIA 83C572 USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <VIA 83C572 USB controller> port 0xd880-0xd89f irq 23 at device 16.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: <VIA 83C572 USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 22 at device 16.4 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <VIA VT6202 USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > umass0: USB2.0 CardReader, rev 2.00/91.44, addr 2 > isab0: <PCI-ISA bridge> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > pcm0: <VIA VT8233X> port 0xd400-0xd4ff irq 22 at device 17.5 on pci0 > pcm0: <Avance Logic ALC655 AC97 Codec> > pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1> > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem 0xfebff400-0xfebff4ff irq 23 at device 18.0 on pci0 > miibus0: <MII bus> on vr0 > rlphy0: <RTL8201L 10/100 media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > vr0: Ethernet address: 00:15:f2:2c:c3:86 > pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 0.1 on pci2 > pci4: <ACPI PCI bus> on pcib4 > acpi_button0: <Sleep Button> on acpi0 > acpi_button1: <Power Button> on acpi0 > ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > uhub5: Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 > uhub5: 3 ports with 2 removable, bus powered > ukbd0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1 > kbd2 at ukbd0 > ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 > ums0: 5 buttons and Z dir. > Timecounters tick every 1.000 msec > acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33 > ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150 > ad6: 286168MB <Seagate ST3300622AS 3.AAE> at ata3-master SATA150 > GEOM_MIRROR: Device gm0s1 created (id=3185843744). > GEOM_MIRROR: Device gm0s1: provider ad4s1 detected. > GEOM_MIRROR: Device gm0s1: provider ad6s1 detected. > GEOM_MIRROR: Device gm0s1: provider ad6s1 activated. > GEOM_MIRROR: Device gm0s1: provider ad4s1 activated. > GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 launched. > SMP: AP CPU #1 Launched! > cd0 at ata0 bus 0 target 0 lun 0 > cd0: <PLEXTOR DVDR PX-740A 1.01> Removable CD-ROM SCSI-0 device > cd0: 33.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <USB2.0 CF CardReader 9144> Removable Direct Access SCSI-0 device > da0: 40.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <USB2.0 CBO CardReader 9144> Removable Direct Access SCSI-0 device > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > (da1:umass-sim0:0:0:1): Medium not present > (da1:umass-sim0:0:0:1): Unretryable error > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > (da1:umass-sim0:0:0:1): Medium not present > (da1:umass-sim0:0:0:1): Unretryable error > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > (da1:umass-sim0:0:0:1): Medium not present > (da1:umass-sim0:0:0:1): Unretryable error > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > (da1:umass-sim0:0:0:1): Medium not present > (da1:umass-sim0:0:0:1): Unretryable error > Opened disk da1 -> 6 > Trying to mount root from ufs:/dev/mirror/gm0s1a > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > >
Igor Robul
2006-Apr-12 09:14 UTC
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
On Tue, Apr 11, 2006 at 06:49:02PM -0700, George Hartzell wrote:> When I try to use burncd to burn a cd, it writes all of the data, says > "fixating CD, please wait.." and then reports > > burncd: ioctl(CDRIOCFIXATE): Input/output error > > Oddly enough, the CD seems to be usable. > > I can successfully burn the same file if I use cdrecord.On same CD-R disc? :-) I sometimes burn many ISO images to CD-Rs "from one box", and on some CD-s I get this error, and on some I dont.
George Hartzell
2006-Apr-12 16:12 UTC
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
Igor Robul writes: > On Tue, Apr 11, 2006 at 06:49:02PM -0700, George Hartzell wrote: > > When I try to use burncd to burn a cd, it writes all of the data, says > > "fixating CD, please wait.." and then reports > > > > burncd: ioctl(CDRIOCFIXATE): Input/output error > > > > Oddly enough, the CD seems to be usable. > > > > I can successfully burn the same file if I use cdrecord. > On same CD-R disc? :-) No, on a fresh disk... ;) > I sometimes burn many ISO images to CD-Rs "from one box", and on some > CD-s I get this error, and on some I dont. I seem to get it reliably, although I *guess* that it could just be chance.... I guess my question is: "Is this one of those known things that everyone just ignores, or do I have an unusual problem?" g.
Igor Robul
2006-Apr-13 05:34 UTC
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
On Wed, Apr 12, 2006 at 09:13:03AM -0700, George Hartzell wrote:> Igor Robul writes: > > On same CD-R disc? :-) > > No, on a fresh disk... ;)So, I think you got my point: there maybe problem with disk.> > I guess my question is: "Is this one of those known things that > everyone just ignores, or do I have an unusual problem?"Until I seen your mail, I have thinked that this is only my problem :-) But because I use very cheap disks I just ignore it, and for safety I just destroing one disk, and burn another.
Joe Altman
2006-Apr-13 16:28 UTC
help ith burncd (Input/output error, 6.1-RC, plextor PX-740a)
> 3. Re: help ith burncd (Input/output error, 6.1-RC, plextor > PX-740a) (George Hartzell) > 5. Re: help ith burncd (Input/output error, 6.1-RC, plextor > PX-740a) (George Hartzell) > > ------------------------------ > > Message: 3 > Date: Wed, 12 Apr 2006 09:13:03 -0700 > From: George Hartzell <hartzell@alerce.com> > > I guess my question is: "Is this one of those known things that > everyone just ignores, or do I have an unusual problem?" > > g. > > ------------------------------ > > Message: 5 > Date: Wed, 12 Apr 2006 10:12:10 -0700 > From: George Hartzell <hartzell@alerce.com> > > I'm just trying to understand if I have a fixable problem, or burncd > has a fixable problem, or if it's just the way that things are..... > > g.>From what I've seen in this thread, and my experience, it doesn't seemto be an unusual problem. acd0: CDRW <PLEXTOR CD-R PX-W1610A/1.04> at ata1-master PIO4 on FreeBSD 6.1-PRERELEASE #0. If I twiddle about with the command line and/or gcombust, I can eventually burn a CD. But I decided, long ago, that for backups an external USB drive was a lot easier to deal with. And there is more space for storage in the bargain. -- My eyes want to sleep; but the skull is no pillow.
Apparently Analagous Threads
- Problem with 16-in-1 card reader
- powerd not behaving with an Asus A8V-MX and Athlon 64 X2 3800+
- XHCI umass support breaks between r248085 and r252560 on 9-STABLE
- USB problems (I/O-Error => USB da(4) quirks, uscanner0)
- usb port issue in 9.1-Prerelease (Possibly Cam related)