search for: da1

...s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB2.0 CF CardReader 9144> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <USB2.0 CBO CardReader 9144> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0...

I am not too familiar with Cairo and RGtk2 and have the following problem: I have a container with two GTK drawing areas converted into Cairo devices. I know that I can set the current drawing context e.g. using dev.set(). But this is tedious. How can I set the context using the objects da1 or da2? w <- gtkWindow() w$setSizeRequest(400, 400) vbox <- gtkVBox() da1 <- gtkDrawingArea() da2 <- gtkDrawingArea() vbox$add(da1) vbox$add(da2) dummy <- asCairoDevice(da1) dummy <- asCairoDevice(da2) w$add(vbox) par(oma=c(0,0,0,0), mar=c(0,0,0,0)) plot(1:10)...

hi all, I'm trying to give access to snapshots taken from by dell iscsi MD3200i to my maildirs users. snapshot are mounted in read only mode from my FreeBSD box. In my /usr/local/etc/dovecot/conf.d/10-mail.conf, I have : namespace inbox { inbox = yes } namespace da1 { prefix = INBOX.backup.da1. hidden = no list = yes inbox = no location = maildir:/da1/%u/Maildir type = private } I have two problems : - In my log, dovecot complain about the fact that my snapshot filsystem is read only Error: open(/da1/test2 at toto.com/Maildir/.Trash/dovecot-uidlist) failed:...

...s when accessing the raid. My problem is that soon after recognizing the attached disk during boot, FreeBSD appears to hang for about 10 seconds and then says ahd0: Recovery Initiated - Card was not paused followed by a great detail of SCSI status information. Eventually it says (da1:ahd0:0:0:0): SCB 255 - timed out (da1:ahd0:0:0:0): no longer in timeout, status = 24b ahd0: Issued Channel A Bus Reset. 1 SCBs aborted (da1:ahd0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da1:ahd0:0:0:0): CAM Status: SCSI Status Error (da1:ahd0:0:0:0): SCSI Status: C...

...ction: Destroy and re-create the pool from a backup source. see: http://illumos.org/msg/ZFS-8000-72 scan: none requested config: NAME STATE READ WRITE CKSUM d FAULTED 0 0 1 raidz1-0 FAULTED 0 0 6 da1 ONLINE 0 0 0 3419704811362497180 OFFLINE 0 0 0 was /dev/da2 da3 ONLINE 0 0 0 da4 ONLINE 0 0 0 da5 ONLINE 0 0 0 But if I look at the labels...

...istory). Here is my conf : namespace { type = private inbox = yes list = yes prefix = INBOX. location = maildir:/home/%u/Maildir:CONTROL=/home/dovecot/control/%u:INDEX=/home/dovecot/indexes/%u } namespace snap { prefix = INBOX.snapshot.h0. hidden = no inbox = no list = yes location = maildir:/da1/%u/Maildir:INDEX=/da1/dovecot/indexes/%u:CONTROL=/da1/dovecot/control/%u type = private } The problem is that I don't see the content of the inbox folder contained in the snapshots whereas subfolders are perfectly viewed ! Inbox cur|new are is /da1/%u/Maildir/ If anyone have a tip, It woul...

...a2: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) da3 at sym1 bus 0 target 3 lun 0 da3: <COMPAQ AB00931B92 3AS8> Fixed Direct Access SCSI-2 device da3: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da3: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) da1 at sym0 bus 0 target 1 lun 0 da1: <COMPAQ AB00931B92 3AS8> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) Aaron D. Gifford wrote: We ran into a perhaps similar pro...

...osition. > > > > 127.18 > 1.06 > > > Wich function would help me? > > I think I should use something like > > > > ffor (i in 80:81){ > > files <- paste('KT', i, '.csv', sep = '') > > myfun <- function(d) { > > da1 <- read.csv(d) > > Output[i,1]=da1[1,2] > > > > } > > lout<- lapply(files, myfun) > > } > > But results that says Output doesn´t exists? > > I must create before? How? > > Many Thans¡¡¡ > [[alternative HTML version deleted]]

...s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB2.0 CF CardReader 9144> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <USB2.0 CBO CardReader 9144> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0...

...chipset (c60X) was recently added via the isci driver. Ok, great, that explains why 8.2-R and 9.0-R didn't see the drives. So, I grabbed the memstick image of 8.3-RELEASE that is on the ftp server, booted it up, and sure enough, as the dmesg scrolls I see it now properly recognizes da0 and da1, as it should (the memstick is da2). It sees the disks fine at this point, everything looks good. However, once the system finishes booting and loads into sysinstall, and I go to partition the drives, I get "No disks found! Please verify that your disk controller is being properly loaded a...

...us1 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 ada1: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 ses0 at m...

...CF 2.5B> Removable Direct Access SCSI-0 device da0: 650KB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <ICSI IC1100 MS 2.5B> Removable Direct Access SCSI-0 device da1: 650KB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <ICSI IC1100 MMC/SD 2.5B> Removable Di...

Hi. If I create a zpool with the following command: zpool create tank raidz2 da0 da1 da2 da3 da4 da5 da6 da7 and after a reboot the device names for some reason are changed so da2 and da5 are swapped, either by altering the LUN setting on the storage or by switching cables/swapping disks etc.? How will zfs handle that? Will it simply acknowledge that all devices are present and t...

...gt; on iicbus0 smbus0: <System Management Bus> on iicsmb0 smb0: <SMBus general purpose I/O> on smbus0 iic0: <I2C general purpose I/O> on iicbus0 acd0: CDROM <MATSHITA CR-176> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da1 at ahc1 bus 0 target 0 lun 0 da1: <transtec > Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1: 293210MB (600494080 512 byte sectors: 255H 63S/T 37379C) da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST39236LC 0010>...

...NOT READY, Medium not present da2 at ahd0 bus 0 scbus0 target 2 lun 0 da2: <SEAGATE ST3146707LC 0004> Fixed Direct Access SCSI-3 device da2: Serial Number 3KS2NFJG00007611CFPX da2: 3.300MB/s transfers da2: Command Queueing enabled da2: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) da1 at ahd0 bus 0 scbus0 target 1 lun 0 da1: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device da1: Serial Number DAA0P7A054G3 da1: 320.000MB/s transfers (160.000MHz DT, offset 127, 16bit) da1: Command Queueing enabled da1: 140272MB (287277984 512 byte sectors: 255H 63S/T 17882C) da3 at...

...oes anyone have any hints as to what I can do to get gvinum to recognize the disks correctly? The system is 6.3 stable Dont worry about the media disks or anything right now - I am trying to revive the system disks for now. Thanks Nikolaj Hansen 7 drives: D elben State: up /dev/da1s1h A: 0/7825 MB (0%) D donau State: up /dev/da0s1h A: 0/7825 MB (0%) D raid5_4_ad11 State: up /dev/ad11 A: 6/194480 MB (0%) D raid5_3_ad10 State: up /dev/ad10 A: 6/194480 MB (0%) D raid5_2_ad9 State: up /dev/ad9 A: 6/194480 MB (0%) D raid5_1_ad8...

...the server is still purring along without any noticeable problems: neptune# grep "timed out" /var/log/messages Jul 25 03:52:51 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x40 - timed out Jul 25 03:57:22 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x18 - timed out Jul 25 03:58:53 neptune /kernel: (da1:ahd1:0:1:0): SCB 0x1e - timed out Jul 26 10:55:46 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x39 - timed out The drives are all U320 Seagate Cheetah 70G ... no RAID involved, its just straight drives using the motherboard's onboard SCSI controller ... the motherboard is the Intel SE7501, in the...

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

...CSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 16) da0 at sym0 bus 0 target 0 lun 0 da0: <COMPAQ WDE4360S 1.52> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C) da1 at sym0 bus 0 target 1 lun 0 da1: <COMPAQ WDE4360S 1.52> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C) Mounting root from ufs:/dev/da0s1a Enter full pathname of shell o...

...ording to firmware. 32 # Sectors according to firmware. P61620D9SUP9ZS # Disk ident. # gpart show => 34 286677053 da0 GPT (136G) 34 256 1 freebsd-boot (128k) 290 286676797 2 freebsd-zfs (136G) => 34 286677053 da1 GPT (136G) 34 256 1 freebsd-boot (128k) 290 286676797 2 freebsd-zfs (136G) Could this be drive geometry releated? (The hp/compaq raid0 drive is just presented to the O/S and is not identical to the raw device, because of raidcontroller on-disk meta information...