freebsd stable - May 2005 - CUPDS reboot the whole system

Hello,

Before a couple of days ago I started /usr/local/sbin/cupsd manualy from
console. When I press CTRL+C to interrupt a program, the system change
runlevel and going to reboot. This was on FreeBSD V5.3, today I
installed fresh new 5.4 but the problem is the same.

cups-base-1.1.23.0_3

-- 
Todor Dragnev <todor.dragnev@gmail.com>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, May 18, 2005 at 01:59:09PM +0300, Todor Dragnev
wrote:
> Hello,
> 
> Before a couple of days ago I started /usr/local/sbin/cupsd manualy from
> console. When I press CTRL+C to interrupt a program, the system change
> runlevel and going to reboot. This was on FreeBSD V5.3, today I
> installed fresh new 5.4 but the problem is the same.
> 
> cups-base-1.1.23.0_3
 
I've never had that problem with CUPS.  However, I always start and stop
it from the script it installs in /usr/local/etc/rc.d.  (It installs
cups.sh.sample, I believe, you have to rename it, then it can be started
with /usr/local/etc/rc.d/cups.sh start |stop| restart. Also, I believe
you have to type the full path to the shell, regardless of where you are
on the system, but I haven't tested that in a long time.)

HTH

- -- 

Scott

GPG KeyID EB3467D6
( 1B848 077D 66F6 9DB0 FDC2  A409 FA54 D575 EB34 67D6)
gpg --keyserver pgp.mit.edu --recv-keys EB3467D6

Buffy: You're missing the whole point of Halloween.
Willow: Free candy?!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (FreeBSD)

iD8DBQFCihBF+lTVdes0Z9YRAhOzAJ9za6UcSTBPoxdiN2++cgJNyytx3gCfVbet
ljlxQEh2L4Cg+p6Pq0+ipFs=hW4D
-----END PGP SIGNATURE-----

Try this:
nohup /usr/local/sbin/cupsd & >/dev/null

The nohup cmd executes the parameter and it will be still running if You
log off. The & sign means that the command should run in the background,
and >/dev/null redirects the stdout of cupsd to dev/null. I often use
that way and it is fine for me.

Todor Dragnev wrote:
>Hello,
>
>Before a couple of days ago I started /usr/local/sbin/cupsd manualy from
>console. When I press CTRL+C to interrupt a program, the system change
>runlevel and going to reboot. This was on FreeBSD V5.3, today I
>installed fresh new 5.4 but the problem is the same.
>
>cups-base-1.1.23.0_3
>
>  
>

On Wed, 18 May 2005, Todor Dragnev wrote:
> Hello,
>
> Before a couple of days ago I started /usr/local/sbin/cupsd manualy from
> console. When I press CTRL+C to interrupt a program, the system change
> runlevel and going to reboot. This was on FreeBSD V5.3, today I
> installed fresh new 5.4 but the problem is the same.
I've had this happen to me more than once on my 4.X system. I started 
cupsd using the rc.d script via ssh and the system shut down and rebooted 
itself as if someone has executed "shutdown -r now".

-- 
Hi! I'm a .signature virus! Copy me into your ~/.signature to help me
spread!

On Wed, May 18, 2005 at 01:59:09PM +0300, Todor Dragnev
wrote:
> Hello,
> 
> Before a couple of days ago I started /usr/local/sbin/cupsd manualy from
> console. When I press CTRL+C to interrupt a program, the system change
> runlevel and going to reboot. This was on FreeBSD V5.3, today I
> installed fresh new 5.4 but the problem is the same.
> 
> cups-base-1.1.23.0_3
Please transcribe exactly what is displayed after you press ^C.

Kris
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050517/ba4b0057/attachment.bin

On ??, 2005-05-17 at 15:30 -0700, Kris Kennaway wrote:
> On Wed, May 18, 2005 at 01:59:09PM +0300, Todor Dragnev wrote:
> > Hello,
> > 
> > Before a couple of days ago I started /usr/local/sbin/cupsd manualy
from
> > console. When I press CTRL+C to interrupt a program, the system change
> > runlevel and going to reboot. This was on FreeBSD V5.3, today I
> > installed fresh new 5.4 but the problem is the same.
> > 
> > cups-base-1.1.23.0_3
> 
> Please transcribe exactly what is displayed after you press ^C.
> 
> Kris
Nothing :(

Message shown in display is 
"The operating system is halted press any key to reboot"

Attached file contain console session before unexpected halt.


-- 
Todor Dragnev <todor.dragnev@gmail.com>
-------------- next part --------------
iLux# killall cupsd
iLux# killall cupsd
No matching processes were found
iLux# /usr/local/sbin/cupsd 
^C
iLux# 
iLux# 
iLux# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May  8 10:21:06 UTC 2005
    root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (801.83-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 402587648 (383 MB)
avail memory = 384253952 (366 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port
0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0xd800-0xd81f irq 5 at device
15.0 on pci0
ed0: Ethernet address: 48:54:e8:2b:97:b9
ed0: if_start running deferred for Giant
ed0: type NE2000 (16 bit) 
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem
0xd9103000-0xd91030ff irq 5 at device 17.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 4c:00:10:a3:07:ce
rl1: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem
0xd9100000-0xd91000ff irq 9 at device 18.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 00:02:44:92:17:0a
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device
19.0 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 11 at device
19.1 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem
0xd9000000-0xd90fffff,0xd9102000-0xd9102fff irq 11 at device 20.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
pcm0: <Cirrus Logic CS4294/98 AC97 Codec>
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xca7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: USB2.0 External Mass Storage Device, rev 2.00/0.01, addr 2
umass0: Get Max Lun not supported (STALLED)
Timecounter "TSC" frequency 801825144 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 16446MB <ST317221A/3.03> [33416/16/63] at ata0-master UDMA66
ad1: 152627MB <ST3160023A/8.01> [310101/16/63] at ata0-slave UDMA66
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <LITE-ON DVDRW SOHW-1653S CS0M> Removable CD-ROM SCSI-0 device 
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a
IP Filter: v3.4.35 initialized.  Default = pass all, Logging = enabled
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to
deny, logging disabled
Accounting enabled
arplookup 10.0.0.1 failed: host is not on local network
ed0: promiscuous mode enabled
rl1: promiscuous mode enabled
arplookup 10.0.0.1 failed: host is not on local network
arplookup 10.0.0.1 failed: host is not on local network
iLux# 
iLux# 
iLux# 
iLux# 
iLux# Connection to fooolhost.fake closed by remote host.

On Wed, 18 May 2005, Todor Dragnev wrote:
> Hello,
>
> Before a couple of days ago I started /usr/local/sbin/cupsd manualy from
> console. When I press CTRL+C to interrupt a program, the system change
> runlevel and going to reboot. This was on FreeBSD V5.3, today I
> installed fresh new 5.4 but the problem is the same.
FreeBSD doesn't have runlevels so I'm not sure what you're referring
to
here.

Its also known that certain old Linux binaries that accidentally get run
as FreeBSD binaries can call reboot() when trying a Linux SYSV syscall.
If you copied cupsd from a linux box, use brandelf on it to make sure it
gets run under the linuxulator.

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite@gumbysoft.com          |  www.FreeBSD.org

On Thu, May 19, 2005 at 01:26:01PM +0300, Todor Dragnev
wrote:
> 
> On ??, 2005-05-17 at 15:30 -0700, Kris Kennaway wrote:
> > On Wed, May 18, 2005 at 01:59:09PM +0300, Todor Dragnev wrote:
> > > Hello,
> > > 
> > > Before a couple of days ago I started /usr/local/sbin/cupsd
manualy from
> > > console. When I press CTRL+C to interrupt a program, the system
change
> > > runlevel and going to reboot. This was on FreeBSD V5.3, today I
> > > installed fresh new 5.4 but the problem is the same.
> > > 
> > > cups-base-1.1.23.0_3
> > 
> > Please transcribe exactly what is displayed after you press ^C.
> > 
> 
> > Kris
> 
> Nothing :(
> 
> Message shown in display is 
> "The operating system is halted press any key to reboot"
> 
> Attached file contain console session before unexpected halt.
Is your cupsd a FreeBSD or linux binary (use brandelf to check)?

Kris
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050519/944fffde/attachment.bin