similar to: CUPDS reboot the whole system

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

Thanks for you reply. I have installed asciidoc with "pkg_add asciidoc" And it returns something: # asciidoc fgh asciidoc: FAILED: input file /root/nut/fgh missing # which asciidoc /usr/local/bin/asciidoc Maybe there is any way to skip building man pages. This is not the such main thing as a new devices support. I also could built the driver that I need # make riello_ser but I don't

Hello, I am attempting to get by broadcom wifi card up and running, am sick of trying to get ndis working, and am attempting to use the bwi driver (originating in dragonflyBSD). I'm hoping others here have tried to do the same and have some pointers. I'm using 7.1-RELEASE (system/source are in-sync) and my card is a BCM94306MP. My dmesg is posted below. Bwi(4) is installed and it

Hello, I''m trying to compile Xen unstable on NetBSD, I''ve aplied the patches from http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/xentools41/patches/?only_with_tag=MAIN and copied the blk files from http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/sysutils/xentools41/files/?only_with_tag=MAIN (I don''t know which of these patches have been applied to xen unstable, so

Here is what I did: # cd /root/nut/ # nut here it's checkouted repository # ./configure --with-user=_ups --with-group=_ups # cd drivers/ # make riello_ser # chgrp bin riello_ser # cp riello_ser /usr/local/bin # here I copied builder driver to folder where nut-package will store their files/drivers # pkg_add nut-2.6.5p1 # ls -la /dev/tty00 crw-rw---- 1 _ups _ups 8, 0 Jul 30

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

Hello everybody Unfortunately my problem still doesn't have any solution. But I have an interesting observation. The gateway freezes very quickly, if torrent client programs are running on workstations. I assume the cause of the problem consists in many number of TCP/IP connections that torrent client establishes. Any ideas? Maybe I can tune somehow a TCP/IP via kernel, sysctl or pf settings?

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

Hi all, I have some problems with my gvinum setup after the system panic'ed. Afterwards the system fails finding the plexes to the subdisks (or at least that is what I can understand after having searched the gvinum source code for the error string in the DMESG log..) The machine is an IBM Netfinity 5000 and the internal HW self tests does not find any errors in the hw. Luckily my root is

I'm running FreeBSD 7.1-PRERELEASE over Asus P5Q motherboard. Such board comes with an nic requiring age0 driver. When the nic is under load, such trasferring big amount of data over gigabit connection (let's say some gigabyte backups), the computer hangs, sometimes with panic, sometimes freezing. Before that i was using an Intel nic with em0 driver and 7.0-Stable#2.. and that

Hi, I was trying to rebuild world on a FreeBSD 10 test system, that I had just installed. ZFS root was setup. I let the installation program do all the ZFS setup and configuration. I put root on a 5 disk encrypted raidz array. Besides the installer configuring 5 times the amount of swap space I asked for (asked for 8gb, installer put 8gb on each drive, for 40gb in total.) everything was working

Hello everybody! Since the update from 6.2-STABLE to 7.0 I'm encountering problems with the temperature of my Thinkpad X60s. Under heavy load, e.g., make builworld or compile gcc or... I get the following output in /var/log/messages: Dec 29 01:53:13 delta1 root: WARNING: system temperature too high, shutting down soon! Dec 29 01:53:13 delta1 syslogd: /dev/:0: No such file or directory Dec 29

Ok, So this is really more of an observation than anything else.? I had a FreeBSD 10.1 server that was running great. Some SSL issue came up, or I upgrade Dovecot in ports - something occurred and the machine started rebooting randomly.? It would run for 2 weeks, then reboot.? It might run for 5 days and then reboot. So I started doing more FreeBSD upgrades, thinking it was a kernel issue. The

Hi, Did anyone else experience this? With 9.1-BETA1 the boot process freezes, among the last lines with verbose boot are acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times after this, dead. What is supposed to happen in the next stage? This laptop worked fine with 9-STABLE to at least february. //per

Hello Got strange problem with high system "%system load" and very slow user level programs (apache+php+mysql) behavior gstat shows 1.5-4% hard disk busy load but system shows about 20-30% load while user load is max 5%. vmstat shows from 2 to 35 process in "b" state. Now use 7.0-RELEASE-p5 , but the same problem was with 7.0-RELEASE. And have no idea what to do with this.

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

Hello, freebsd-stable. Does somebody use some software RAID5 on FreeBSD in real production system? I want to build storage server for my home: RAW photos, multi-layer PhotoShop files and FLAC-encoded music consume a lot of space, and they should be availible both from desktop & notebook. Also, all photo-content is unique, so I need some insuranse from single HDD crash. I understand,

Hello, Since FreeBSD 9.1 I have strange problems with the distribution. Some servers are rebooting without any kernel panic, instanly. First i thought it's a problem with my KVM system, but one of my FreeBSD under a Dell R210 have the same problem. The servers concerned are now: - Monitoring server - LDAP test server - Some other servers, randomly (not in production). First i thought it's