Chittaranjan Mandal (w/CSE & SIT)
2004-Jan-09 12:53 UTC
[Samba] Home drive mapping with samba as PDC.
Hi
Could I request home help with logon drive mapping.
I am able to join make a (win2k) PC join a domain with samba as pdc.
I am able to logon but I DO NOT GET the HOME DRIVE.
I am able to get to my file via network neighbourhood.
ON the PC I HAVE an OPTION to MAP my HOME DRIVE, but I would like the
home drive to appear as the "H:" drive in "My Computer"
after I log in.
How to do that? My smb.conf file is appended.
In particular I have the following lines there.
domain logons = yes
logon script = %U.ba
logon path = \\%L\Profiles\%U
logon drive = "H:"
-Chitta
-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Configuration information =========================#
http://www.linuxheadquarters.com/howto/networking/samba.shtml
# http://www.oreilly.com/catalog/samba/chapter/book/appc_01.html
# creating samba passwds:
# ypcat passwd | mksmbpasswd.sh > /etc/samba/smbpasswd.new
#======================= Global Settings
====================================[global]
# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = SITotal
# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
; netbios name = sit-samba
# server string is the equivalent of the NT Description field
server string = Samba Server %v on %h
# Message command is run by samba when a "popup" message is sent to
it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s
# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# (as cups is now used in linux-mandrake 7.2 by default)
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
## printcap name = cups
printcap name = /etc/printcap
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
## printing = cups
printing = lprng
# Samba 2.2 supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to
# enable it below.
# This parameter works like domain admin group:
# printer admin = @<group> <user>
printer admin = @adm
# This should work well for winbind:
; printer admin = @"Domain Admins"
# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Set the log (verbosity) level (0 <= log level <= 10)
; log level = 3
# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
# not work for all the hosts in your network.
hosts allow = 10.14. 127.
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# Allow users to map to guest:
map to guest = bad user
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server or security = domain
# When using security = domain, you should use password server = *
; password server = <NT-Server-Name>
; password server = *
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT domain
# The smbpasswd file is only required by a server doing authentication, thus
# members of a domain do not need one.
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file'
above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
unix password sync = Yes
# You either need to setup a passwd program and passwd chat, or
# enable pam password change
pam password change = yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
;*passwd:*all*authentication*tokens*updated*successfully*
; passwd program = ssh root@sit-dns passwd %u \;
/var/www/html/setup/nisPasswdInfoInit.sh \; cd /var/yp/`domainname` \; make -f
/var/yp/Makefile passwd group
; passwd program = /usr/bin/passwd %u \;
/var/www/html/setup/nisPasswdInfoInit.sh \; cd /var/yp/`domainname` \; make -f
/var/yp/Makefile passwd group
; passwd chat = *New*UNIX*password* %n\n *Retype*new*UNIX*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to unix
uid's
# and gid's. winbind uid and winbind gid are the only required parameters.
#
# winbind uid is the range of uid's winbind can use when mapping RIDs to
uid's
winbind uid = 100000-120000
#
# winbind gid is the range of uid's winbind can use when mapping RIDs to
gid's
winbind gid = 100000-120000
#
# winbind separator is the character a user must use between their domain
# name and username, defaults to "\"
; winbind separator = +
#
# winbind use default domain allows you to have winbind return usernames
# in the form user instead of DOMAIN+user for the domain listed in the
# workgroup parameter.
; winbind use default domain = yes
#
# template homedir determines the home directory for winbind users, with
# %D expanding to their domain name and %U expanding to their username:
; template homedir = /home/%D/%U
# When using winbind, you may want to have samba create home directories
# on the fly for authenticated users. Ensure that /etc/pam.d/samba is
# using 'service=system-auth-winbind' in pam_stack modules, and then
# enable obedience of pam restrictions below:
; obey pam restrictions = yes
#
# template shell determines the shell users authenticated by winbind get
; template shell = /bin/bash
# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes
# Use NIS home directories
# Reference: http://www.oreilly.com/catalog/samba/chapter/book/ch06_06.html
nis homedir = yes
; homedir map = auto.home
# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations or Primary Domain Controller for WinNT and Win2k
domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
logon script = %U.bat
# Where to store roaming profiles for WinNT and Win2k
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
logon path = \\%L\Profiles\%U
logon drive = "H:"
# Where to store roaming profiles for Win9x. Be careful with this as it also
# impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile
# The add user script is used by a domain member to add local user accounts
# that have been authenticated by the domain controller, or by the domain
# controller to add local machine accounts when adding machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a group.
# Script for domain controller for adding machines:
add user script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine
Account' -s /bin/false -M %u
# Script for domain controller with LDAP backend for adding machines (please
# configure in /etc/samba/smbldap_conf.pm first):
; add user script = /usr/share/samba/scripts/smbldap-useradd.pl -w -d /dev/null
-g machines -c 'Machine Account' -s /bin/false %u
# Script for domain member for adding local accounts for authenticated users:
; add user script = /usr/sbin/useradd -s /bin/false %u
# Domain groups:
# domain admin group is a list of unix users or groups who are made members
# of the Domain Admin group
domain admin group = root @adm
#
# domain guest groups is a list of unix users or groups who are made members
# of the Domain Guests group
; domain guest group = nobody @guest
# LDAP configuration for Domain Controlling:
# The account (dn) that samba uses to access the LDAP server
# This account needs to have write access to the LDAP tree
# You will need to give samba the password for this dn, by
# running 'smbpasswd -w mypassword'
; ldap admin dn = cn=root,dc=mydomain,dc=com
; ldap ssl = start_tls
# start_tls should run on 389, but samba defaults incorrectly to 636
; ldap port = 389
; ldap suffix = dc=mydomain,dc=com
; ldap server = ldap.mydomain.com
# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be
specified
# the default order is "host lmhosts wins bcast". "host"
means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system
configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean Hangul),
# 950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
; client code page = 850
; character set = ISO8859-1
#============================ Share Definitions
=============================[homes]
comment = Home Directories
browseable = yes
writable = yes
# You can enable VFS recycle bin on a per share basis:
# Uncomment the next 2 lines (make sure you create a
# .recycle folder in the base of the share and ensure
# all users will have write access to it. See
# examples/VFS/recycle/REAME in samba-doc for details
; vfs object = /usr/lib/samba/vfs/recycle.so
; vfs options= /etc/samba/recycle.conf
# You may want to prevent abuse of your server disk space, and spread of virii
; veto files = /*.eml/*.nws/*.dll/*.mp3/*.MP3/*.mpg/*.MPG/*.vbs/*.VBS/
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no
#Uncomment the following 2 lines if you would like your login scripts to
#be created dynamically by ntlogon (check that you have it in the correct
#location (the default of the ntlogon rpm available in contribs)
;root preexec = /usr/bin/ntlogon -u %U -g %G -o %a -d /var/lib/samba/netlogon/
;root postexec = rm -f /var/lib/samba/netlogon/%U.bat
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
[Profiles]
path = /var/lib/samba/profiles
browseable = no
; guest ok = yes
writable = yes
# This script can be enabled to create profile directories on the fly
# You may want to turn off guest acces if you enable this, as it
# hasn't been thoroughly tested.
root preexec = PROFILE=/var/lib/samba/profiles/%u; if [ ! -e $PROFILE ]; \
then mkdir -pm700 $PROFILE; chown %u.%g $PROFILE;fi
# NOTE: If you have a CUPS print system there is no need to
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you
have
# to swap the 'print command' line below with the commented one.
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
# to allow user 'guest account' to print.
; guest ok = yes
writable = no
printable = yes
create mode = 0700
# ====================================# print command: see above for details.
# ====================================; print command = lpr-cups -P %p -o raw
%s -r # using client side printer drivers.
; print command = lpr-cups -P %p %s -r # using cups own drivers (use generic
PostScript on clients).
# The following two commands are the samba defaults for printing=cups
# change them only if you need different options:
; lpq command = lpq -P %p
; lprm command = cancel %p-%j
print command = /usr/bin/lpr -U%U@%M -P%p -r %s
lpq command = /usr/bin/lpq -U%U@%M -P%p
lprm command = /usr/bin/lprm -U%U@%M -P%p %j
lppause command = /usr/sbin/lpc -U%U@%M hold %p %j
lpresume command = /usr/sbin/lpc -U%U@%M release %p %j
queuepause command = /usr/sbin/lpc -U%U@%M -P%p stop
queueresume command = /usr/sbin/lpc -U%U@%M -P%p start
# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/docs/Samba-HOWTO-Collection.pdf
[print$]
path = /var/lib/samba/printers
browseable = yes
read only = yes
write list = @adm root
; guest ok = yes
# A useful application of samba is to make a PDF-generation service
# To streamline this, install windows postscript drivers (preferably colour)
# on the samba server, so that clients can automatically install them.
[pdf-generator]
path = /var/tmp
guest ok = No
printable = Yes
comment = PDF Generator (only valid users)
#print command = /usr/share/samba/scripts/print-pdf file path win_path
recipient IP doc_name &
print command = /usr/share/samba/scripts/print-pdf %s ~%u //%L/%u %m %I &
[pdf-screen]
copy = pdf-generator
comment = PDF Generator - Screen quality (only valid users)
print command=/usr/share/samba/scripts/print-pdf %s ~%u //%L/%u %m %I
"" %S &
[pdf-printer]
copy = pdf-generator
comment = PDF Generator - Print quality (only valid users)
print command=/usr/share/samba/scripts/print-pdf %s ~%u //%L/%u %m %I
"" %S &
[pdf-prepress]
copy = pdf-generator
comment = PDF Generator - PrePress quality (only valid users)
print command=/usr/share/samba/scripts/print-pdf %s ~%u //%L/%u %m %I
"" %S &
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba/public
; public = yes
; writable = no
; write list = @staff
# Audited directory through experimental VFS audit.so module:
# Uncomment next line.
; vfs object = /usr/lib/samba/vfs/audit.so
# Other examples.
#
# A private printer, usable only by Fred. Spool data will be placed in
Fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by Fred. Note that Fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
Chittaranjan Mandal (w/CSE & SIT) wrote:> Hi > > Could I request home help with logon drive mapping. > > I am able to join make a (win2k) PC join a domain with samba as pdc. > I am able to logon but I DO NOT GET the HOME DRIVE. > > I am able to get to my file via network neighbourhood. > > ON the PC I HAVE an OPTION to MAP my HOME DRIVE, but I would like the > home drive to appear as the "H:" drive in "My Computer" after I log in. > > How to do that? My smb.conf file is appended. > In particular I have the following lines there. > domain logons = yes > logon script = %U.ba > logon path = \\%L\Profiles\%U > logon drive = "H:"try removing the quotes: logon drive = H: Regards, J?r?me -- J?r?me Fenal - Consultant Unix/SAN/Logiciel Libre Groupe Expert & Managed Services - LogicaCMG France http://www.logicacmg.com/fr/ - <mailto:jerome.fenal AT logicacmg.com>
Take the quotes away from the logon drive parameter. I think they are causing you problems. Try testparm as well to see if this might be the case. ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | | Ryan Novosielski - Jr. UNIX Systems Admin |$&| |__| | | |__/ | \| _| | novosirj@umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent. | IST/ACS - NJMS Medical Science Bldg - C630 On Fri, 9 Jan 2004, Chittaranjan Mandal (w/CSE & SIT) wrote:> Hi > > Could I request home help with logon drive mapping. > > I am able to join make a (win2k) PC join a domain with samba as pdc. > I am able to logon but I DO NOT GET the HOME DRIVE. > > I am able to get to my file via network neighbourhood. > > ON the PC I HAVE an OPTION to MAP my HOME DRIVE, but I would like the > home drive to appear as the "H:" drive in "My Computer" after I log in. > > How to do that? My smb.conf file is appended. > In particular I have the following lines there. > domain logons = yes > logon script = %U.ba > logon path = \\%L\Profiles\%U > logon drive = "H:" > > -Chitta > > > >