Hi,
I have a digium card (igium, Inc. Wildcard TE405P quad-span T1/E1/J1 card
5.0V (rev 02)) 4 ports
I want to make a loop test between digium card E1 to test the
configuration of dahdi
What I want to do scenario is
I connect port 1 and port4 in the digium card with E1 cable
SIPcall-->E1 Digium port 1--->(Loop)E1 port 2---->sip extension local.
kindly can any can help me to draw this dialpan in the extensions.conf
Description Alarms IRQ bpviol CRC4 Fra
Codi Options LBO
T4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 2 RED 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 3 RED 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 4 OK 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
Khaled Chehab
NGN Eng.
Untitled
Operations Office - Lebanon
Office : +961 1 868686 ext 115
Mobile: +961 3 045212
E-mail: <mailto:bsara at mg-tel.com> Kchehab at Xplorium.com
MSN ID :KhalidChehab at hotmail.com
Web Site: <http://www.Xplorium.com> http://www.Xplorium.com
*********************************************
No employee or agent is authorized to conclude any binding agreement on behalf
of Xplorium with another party by e-mail without express written confirmation by
an officer of Xplorium. Any views expressed by an individual in this electronic
message do not necessarily reflect views of Xplorium or its subsidiaries and
associates.
This electronic message and its attachments are solely addressed to the
addressee(s), and contain confidential information protected from disclosure
belonging to Xplorium.
If you are not the intended addressee of this electronic message and its
attachments, kindly delete it immediately from your system and notify the sender
by electronic mail. You must not copy this message or attachment or disclose its
content to any other person.
Xplorium does not guarantee the integrity of this electronic message and any of
its attachments, or that they are free from computer viruses or other defects.
*********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20091109/e7eff029/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1998 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20091109/e7eff029/attachment-0001.jpeg
Find my dahdi config files below
dahdi-channels.conf
; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4
ClockSource
group=0,11
context=default
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63
; Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 RED
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 32-46,48-62
context = default
group = 63
; Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS/CRC4 RED
group=0,13
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 63-77,79-93
context = default
group = 63
; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS/CRC4
group=0,14
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 94-108,110-124
context = default
group = 63
Chan_dahdi.conf
[trunkgroups]
[channels]
language=en
context=default
signalling = pri_cpe
callwaiting=yes
hidecallerid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=no
relaxdtmf=yes
usedistinctiveringdetection=yes
usecallingpres=yes
busydetect=yes
callprogress=yes
rxgain=2.0
txgain=2.0
#include dahdi-channels.conf
/etc/dahdi/system.conf
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4
ClockSource
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 RED
span=2,2,0,ccs,hdb3,crc4
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62
# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS/CRC4 RED
span=3,3,0,ccs,hdb3,crc4
# termtype: te
bchan=63-77,79-93
dchan=78
echocanceller=mg2,63-77,79-93
# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS/CRC4
span=4,4,0,ccs,hdb3,crc4
# termtype: te
bchan=94-108,110-124
dchan=109
echocanceller=mg2,94-108,110-124
# Global data
loadzone = us
defaultzone = us
Hi,
I have a digium card (igium, Inc. Wildcard TE405P quad-span T1/E1/J1 card
5.0V (rev 02)) 4 ports
I want to make a loop test between digium card E1 to test the
configuration of dahdi
What I want to do scenario is
I connect port 1 and port4 in the digium card with E1 cable
SIPcall-->E1 Digium port 1--->(Loop)E1 port 2---->sip extension local.
kindly can any can help me to draw this dialpan in the extensions.conf
Description Alarms IRQ bpviol CRC4 Fra
Codi Options LBO
T4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 2 RED 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 3 RED 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 4 OK 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
Khaled Chehab
NGN Eng.
Untitled
Operations Office - Lebanon
Office : +961 1 868686 ext 115
Mobile: +961 3 045212
E-mail: Kchehab at Xplorium.com <mailto:bsara at mg-tel.com>
MSN ID :KhalidChehab at hotmail.com
Web Site: http://www.Xplorium.com
_____
*********************************************
No employee or agent is authorized to conclude any binding agreement on
behalf of Xplorium with another party by e-mail without express written
confirmation by an officer of Xplorium. Any views expressed by an individual
in this electronic message do not necessarily reflect views of Xplorium or
its subsidiaries and associates.
This electronic message and its attachments are solely addressed to the
addressee(s), and contain confidential information protected from disclosure
belonging to Xplorium.
If you are not the intended addressee of this electronic message and its
attachments, kindly delete it immediately from your system and notify the
sender by electronic mail. You must not copy this message or attachment or
disclose its content to any other person.
Xplorium does not guarantee the integrity of this electronic message and any
of its attachments, or that they are free from computer viruses or other
defects.
*********************************************
*********************************************
No employee or agent is authorized to conclude any binding agreement on behalf
of Xplorium with another party by e-mail without express written confirmation by
an officer of Xplorium. Any views expressed by an individual in this electronic
message do not necessarily reflect views of Xplorium or its subsidiaries and
associates.
This electronic message and its attachments are solely addressed to the
addressee(s), and contain confidential information protected from disclosure
belonging to Xplorium.
If you are not the intended addressee of this electronic message and its
attachments, kindly delete it immediately from your system and notify the sender
by electronic mail. You must not copy this message or attachment or disclose its
content to any other person.
Xplorium does not guarantee the integrity of this electronic message and any of
its attachments, or that they are free from computer viruses or other defects.
*********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20091109/3b295477/attachment.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1998 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20091109/3b295477/attachment.jpeg
Hi, On Mon, Nov 09, 2009 at 12:52:15PM +0200, Khaled W Chehab wrote:> Hi, > > I have a digium card (igium, Inc. Wildcard TE405P quad-span T1/E1/J1 card > 5.0V (rev 02)) 4 ports > > I want to make a loop test between digium card E1 to test the > configuration of dahdiThis is fairly simple. But I figure it is best that you actually understand what happens here.> > What I want to do scenario is > > I connect port 1 and port4 in the digium card with E1 cable > > SIPcall-->E1 Digium port 1--->(Loop)E1 port 2---->sip extension local.In this scenario we have several different Asterisk channels: 1. SIPcall -> E1-port1 Incoming call from SIP generates a SIP channel. The dialplan context for it is set in sip.conf . You want it to generate a call to some DAHDI channel. This could be done using e.g. Dial(DAHDI/g1) (why g1? To what channels does it refer? See documentation in chan_dahdi.conf to see why I set it like that. Much of it is arbitrary). 2. E1-port1 -> E1-port2 Loopback cable. It seems that you connected port 1 to port 4 rather than to port 2, right? 3. E1-port2 -> sip extension Now we have an incoming DAHDI call. The dialplan context is set from 'context' in chan_dahdi.conf (where exactly?) . Now you'll probably need to use some dialplan such as: Dial(SIP/your-local-sip-extension) -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
Hi,
I have a digium card (digium, Inc. Wildcard TE405P quad-span T1/E1/J1 card
5.0V (rev 02)) 4 ports
I want to make a loop test between spans on digium card in order to test
the spans.
I connect port 1 and port4 with cross E1 cable
I am trying to do this scenario
SIPcall--> Digium span 1--->(Loop)Span 4---->sip
<mailto:extension at xx.xx.xx.xx> extension at xx.xx.xx.xx.
Kindly can you help me on how to forward the call from Span1-?Span4 and then
from span4-?Sip at xx.xx.xx
My dahdi_channels.conf
; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
group=1
context=default
switchtype = euroisdn
signalling = pri_net
channel => 1-15,17-31
context = default
;group = 63
; Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"
group=4
;context=default
switchtype = euroisdn
signalling = pri_cpe
channel => 94-108,110-124
context = incomingck
;group = 63
-----extensions.conf---------
[default]
exten => _X.,1,Dial(DAHDI/G1/${EXTEN})
[incomingck]
exten => _X.,1,Dial(SIP/96123232 at 212.98.141.217,60)
Regards
*********************************************
No employee or agent is authorized to conclude any binding agreement on behalf
of Xplorium with another party by e-mail without express written confirmation by
an officer of Xplorium. Any views expressed by an individual in this electronic
message do not necessarily reflect views of Xplorium or its subsidiaries and
associates.
This electronic message and its attachments are solely addressed to the
addressee(s), and contain confidential information protected from disclosure
belonging to Xplorium.
If you are not the intended addressee of this electronic message and its
attachments, kindly delete it immediately from your system and notify the sender
by electronic mail. You must not copy this message or attachment or disclose its
content to any other person.
Xplorium does not guarantee the integrity of this electronic message and any of
its attachments, or that they are free from computer viruses or other defects.
*********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20091109/74f4171f/attachment.htm