asterisk users - May 2006 - TE110P on E1

Hi,

I wonder if anyone is using Digium's TE110P card on an E1 connection.
I have been try to, but so far it wasn't much of a success.
It only works more or less in EuroISDN as PRI CPE.
And even that config gives me some trouble with channel negotiation.

My current config:
*zaptel.conf:*
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone=be
defaultzone=be

*zapata.conf:*
[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1

[channels]
context=incoming-pri
switchtype=euroisdn
pridialplan=national
prilocaldialplan=national
signalling=pri_cpe
group=1
channels => 1-15,17-31

I have tried EuroISDN and QSIG in both NET and CPE, without much
success.
>From traces of D-channel messaging, I think there's a problem with
channel
negotiation.
The information element (IE) involved only shows 5 bytes coming from our
PBX.
But Asterisk (Zaptel) uses 6 bytes. From pri debug messages on Asterisk, I
see that it adds a "DS1 Identifier".
I haven't seen that in other d-channel traces between other systems.

Anyone with experience on this matter???

Regards,

Koen
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060512/4497415a/attachment.htm

For BT in the UK I use :-

zaptel.conf
loadzone = uk
defaultzone=uk
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31

zapata.conf
[trunkgroups]
[channels]
language=en
context=did
priindication = outofband
usecallerid=yes
cidsignalling=v23
usecallingpres=yes
sendcalleridafter=1
switchtype = euroisdn
pridialplan=unknown
signalling = pri_cpe
group = 1
channel => 1-15
channel => 17-31
overlap=yes


On Fri, 2006-05-12 at 08:34, Koen Van Impe wrote:
> Hi,
>  
> I wonder if anyone is using Digium's TE110P card on an E1 connection.
> I have been try to, but so far it wasn't much of a success.
> It only works more or less in EuroISDN as PRI CPE.
> And even that config gives me some trouble with channel negotiation.
>  
> My current config:
> zaptel.conf:
> span=1,1,0,ccs,hdb3
> bchan=1-15,17-31
> dchan=16
> loadzone=be
> defaultzone=be
>  
> zapata.conf:
> [trunkgroups]
> trunkgroup => 1,16
> spanmap => 1,1,1
>  
> [channels]
> context=incoming-pri
> switchtype=euroisdn
> pridialplan=national
> prilocaldialplan=national
> signalling=pri_cpe
> group=1
> channels => 1-15,17-31
>  
> I have tried EuroISDN and QSIG in both NET and CPE, without much
> success.
> From traces of D-channel messaging, I think there's a problem with
> channel negotiation.
> The information element (IE) involved only shows 5 bytes coming from
> our PBX.
> But Asterisk (Zaptel) uses 6 bytes. From pri debug messages on
> Asterisk, I see that it adds a "DS1 Identifier".
> I haven't seen that in other d-channel traces between other systems.
>  
> Anyone with experience on this matter???
>  
> Regards,
>  
> Koen
> 
> ______________________________________________________________________
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users