asterisk users - Apr 2006 - AW: Dial out on Zap: Can't fix up channel from 31 to 30 because 30 is already in use??

I'm not sure if it's the same problem but your error message likely the
same.
after i additing pridialplan=local in the zapata.conf i'm able to make
outboundcalls (located in germany)

marcus

-----Urspr?ngliche Nachricht-----
Von: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]
Gesendet: Dienstag, 11. April 2006 16:33
An: asterisk-users@lists.digium.com
Betreff: [Asterisk-Users] Dial out on Zap: Can't fix up channel from 31 to
30 because 30 is already in use??

Hi,

I still cant dial out on Zap and I really have no clue why.
I'm using Asterisk Asterisk 1.2.6 and Zaptel 1.2.5 with Digium card 4 ports,
31 channels each and able to receive incoming calls and fax perfectly.

I've done this in my dial plan.

exten => 111,1,Answer()
exten => 111,n,Ringing()
exten => 111,n,Wait(2)
exten => 111,n,AbsoluteTimeout(30)
exten => 111,n,Dial(Zap/G1/002212601574) exten =>
111,n,NoOp(${DIALSTATUS}) exten => 111,n,Busy() exten => 111,n,Hangup()

My zapata.conf is like this


[channels]
context=from-pstn
group=0
switchtype=euroisdn
overlapdial=yes
faxdetect=no
echocancel=yes
echocancelwhenbridged=yes


; PRI port 1 (E1)
; context=1
group=1
signalling=pri_cpe
channel=>1-15,17-31


And I've got this on my CLI:

   -- Accepting overlap call from '2212601571' to '111' on
channel 0/31, span 1
    -- Starting simple switch on 'Zap/31-1'
    -- Executing Answer("Zap/31-1", "") in new stack
    -- Executing Ringing("Zap/31-1", "") in new stack
    -- Executing Wait("Zap/31-1", "2") in new stack
    -- Executing AbsoluteTimeout("Zap/31-1", "30") in new
stack
    -- Set Absolute Timeout to 30
    -- Executing Dial("Zap/31-1", "Zap/G1/002212601574") in
new stack
    -- Requested transfer capability: 0x00 - SPEECH
    -- Called G1/002212601574
    -- Moving call from channel 31 to channel 30 Apr 11 16:27:06 WARNING[10322]:
chan_zap.c:7745 pri_fixup_principle:
Can't fix up channel from 31 to 30 because 30 is already in use Apr 11
16:27:06 WARNING[10322]: chan_zap.c:9046 pri_dchannel: Unable to move channel
30!
    -- Channel 0/30, span 1 got hangup request Apr 11 16:27:06 WARNING[10966]:
app_dial.c:706 wait_for_answer: Unable to forward voice
    -- Hungup 'Zap/30-1'
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing NoOp("Zap/31-1", "CHANUNAVAIL") in new
stack
    -- Executing Busy("Zap/31-1", "") in new stack
    -- Channel 0/31, span 1 got hangup request
  == Spawn extension (from-pstn, 111, 7) exited non-zero on 'Zap/31-1'
    -- Executing NoOp("Zap/31-1", "") in new stack
    -- Executing Goto("Zap/31-1", "999") in new stack
    -- Goto (from-pstn,h,999)
    -- Hungup 'Zap/31-1'



Could somebody give me a clue?


Pim

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Hi Marcus!!!!


Yesterday I tried that but it didn't work but today I tried again just 
as u said and it works!!

Danke sch?n! Vielen Dank!

Gru?,

Pim

Marcus.Rothe@bertelsmann.de wrote:
> I'm not sure if it's the same problem but your error message likely
the same.
> after i additing pridialplan=local in the zapata.conf i'm able to make
outboundcalls (located in germany)
>
> marcus
>
> -----Urspr?ngliche Nachricht-----
> Von: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]
> Gesendet: Dienstag, 11. April 2006 16:33
> An: asterisk-users@lists.digium.com
> Betreff: [Asterisk-Users] Dial out on Zap: Can't fix up channel from 31
to 30 because 30 is already in use??
>
> Hi,
>
> I still cant dial out on Zap and I really have no clue why.
> I'm using Asterisk Asterisk 1.2.6 and Zaptel 1.2.5 with Digium card 4
ports, 31 channels each and able to receive incoming calls and fax perfectly.
>
> I've done this in my dial plan.
>
> exten => 111,1,Answer()
> exten => 111,n,Ringing()
> exten => 111,n,Wait(2)
> exten => 111,n,AbsoluteTimeout(30)
> exten => 111,n,Dial(Zap/G1/002212601574) exten =>
111,n,NoOp(${DIALSTATUS}) exten => 111,n,Busy() exten => 111,n,Hangup()
>
> My zapata.conf is like this
>
>
> [channels]
> context=from-pstn
> group=0
> switchtype=euroisdn
> overlapdial=yes
> faxdetect=no
> echocancel=yes
> echocancelwhenbridged=yes
>
>
> ; PRI port 1 (E1)
> ; context=1
> group=1
> signalling=pri_cpe
> channel=>1-15,17-31
>
>
> And I've got this on my CLI:
>
>    -- Accepting overlap call from '2212601571' to '111' on
channel 0/31, span 1
>     -- Starting simple switch on 'Zap/31-1'
>     -- Executing Answer("Zap/31-1", "") in new stack
>     -- Executing Ringing("Zap/31-1", "") in new stack
>     -- Executing Wait("Zap/31-1", "2") in new stack
>     -- Executing AbsoluteTimeout("Zap/31-1", "30") in
new stack
>     -- Set Absolute Timeout to 30
>     -- Executing Dial("Zap/31-1",
"Zap/G1/002212601574") in new stack
>     -- Requested transfer capability: 0x00 - SPEECH
>     -- Called G1/002212601574
>     -- Moving call from channel 31 to channel 30 Apr 11 16:27:06
WARNING[10322]: chan_zap.c:7745 pri_fixup_principle:
> Can't fix up channel from 31 to 30 because 30 is already in use Apr 11
16:27:06 WARNING[10322]: chan_zap.c:9046 pri_dchannel: Unable to move channel
30!
>     -- Channel 0/30, span 1 got hangup request Apr 11 16:27:06
WARNING[10966]: app_dial.c:706 wait_for_answer: Unable to forward voice
>     -- Hungup 'Zap/30-1'
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Executing NoOp("Zap/31-1", "CHANUNAVAIL") in new
stack
>     -- Executing Busy("Zap/31-1", "") in new stack
>     -- Channel 0/31, span 1 got hangup request
>   == Spawn extension (from-pstn, 111, 7) exited non-zero on
'Zap/31-1'
>     -- Executing NoOp("Zap/31-1", "") in new stack
>     -- Executing Goto("Zap/31-1", "999") in new stack
>     -- Goto (from-pstn,h,999)
>     -- Hungup 'Zap/31-1'
>
>
>
> Could somebody give me a clue?
>
>
> Pim
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>