Hi,
i was able to fix this problem when i added the line pridialplan=local in the
zapata.conf but it depends on your telco, i think.
marcus
-----Urspr?ngliche Nachricht-----
Von: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]
Gesendet: Donnerstag, 6. April 2006 11:50
An: asterisk-users@lists.digium.com
Betreff: [Asterisk-Users] Dial out on Zap
Hi,
I'm trying to test my dial out function so I did something like this in
extensions.conf
exten => 999,1,Dial(Zap/g1/02601591)
exten => 999,102,Congestion()
My Zapata.conf looks something like this
[channels]
context=from-pstn
group=0
switchtype=euroisdn
overlapdial=yes
faxdetect=no
; PRI port 1 (E1)
; context=1
group=1
signalling=pri_cpe
channel=>1-15,17-31
I am able to receive the fax just fine with this setting. So I think
it's ok.
I'm using a Digium card connecting to a PSTN. There're 4 ports on the
card, 31 channels each, but we currently use one.
When I call extension 999, it was supposed to forward my call to
02601591, right?
But it didn't. It just gets silence and it hangs up the call.
On my CLI it looks something like this:
-- Executing Dial("Zap/1-1", "Zap/g1/02601591") in new
stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/02601591
-- Moving call from channel 1 to channel 2
Apr 6 11:08:08 WARNING[5854]: chan_zap.c:7745 pri_fixup_principle:
Can't fix up channel from 1 to 2 because 2 is already in use
Apr 6 11:08:08 WARNING[5854]: chan_zap.c:9046 pri_dchannel: Unable to
move channel 2!
-- Zap/2-1 is proceeding passing it to Zap/1-1
Apr 6 11:08:22 NOTICE[5849]: chan_iax2.c:5691 update_registry:
Restricting registration for peer 'hylafax-iaxmodem' to 60 seconds
(requested 300)
-- Channel 0/2, span 1 got hangup request <----- I didn't hang up
the call. It did by itself.
-- Hungup 'Zap/2-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing Congestion("Zap/1-1", "") in new stack
-- Channel 0/1, span 1 got hangup request
== Spawn extension (voice, 999, 102) exited non-zero on 'Zap/1-1'
-- Executing SetVar("Zap/1-1", "HANGUP_TIME=1144314509")
in new stack
-- Executing NoOp("Zap/1-1", "16") in new stack
-- Hungup 'Zap/1-1'
I'm a bit confused what I did wrong. Do I need a second line or something??
Pim
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
