asterisk users - Oct 2004 - Re Problem with Asterisk 2 fx100 cards

Hi

I have installed 2 fx0 cards into a machine
1 for pstn (out)  and the other for pstn (in)
However I can get the first card (pstnout to work fine)
I have swapped the cards and both work
I am also unable to make outgoign on the second card



ztcfg -v shows
r2d2:/etc/asterisk# ztcfg -v

Zaptel Configuration
=====================

2 channels configured.


My /etc/zapdata.conf file
#
fxsks=1,2
loadzone=au
defaultzone=au

My /etc/asterisk/zapdata.conf
context=pstnin
group=1
pickupgroup=1
immediate=yes
musiconhold=default channel => 1
;
context=incoming
group=1
signalling=fxs_ks
callerid=asreceived
immediate=yes
channel =>2


My /etc/asterisk/extensions.conf
[pstnin]
exten => s,1,Wait,0
exten => s,2,Answer
exten => s,3,DISA,no-password|default
include => default

[incoming]
exten => s,1,Wait,0
exten => s,2,Answer
exten => s,1,DISA,no-password|default
include => default



Any Ideas?



Samantha
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041004/cf96a9dd/attachment.htm

-----Original Message-----
  From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Samantha
(Femtech)
  Sent: 04 October 2004 13:20
  To: asterisk-users@lists.digium.com
  Subject: [Asterisk-Users] Re Problem with Asterisk 2 fx100 cards


  Hi

  I have installed 2 fx0 cards into a machine
  1 for pstn (out)  and the other for pstn (in)
  However I can get the first card (pstnout to work fine)
  I have swapped the cards and both work
  I am also unable to make outgoign on the second card



  ztcfg -v shows
  r2d2:/etc/asterisk# ztcfg -v

  Zaptel Configuration
  =====================

  2 channels configured.



Try This,


Samantha,

My /etc/zaptel.conf file
#
fxoks=1
fxsks=2
loadzone=au
defaultzone=au

My /etc/asterisk/zapdata.conf
;
context=pstnin
signalling=fxo_ks
group=1
pickupgroup=1
immediate=yes
musiconhold=default
channel => 1
;
context=pstnout
group=1
signalling=fxs_ks
callerid=asreceived
immediate=yes
channel =>2


My /etc/asterisk/extensions.conf
[pstnin]
exten => s,1,Wait,0
exten => s,2,Answer
exten => s,3,DISA,no-password|default
include => default

[pstnout]
exten => 9.,1,Dial(ZAP/2/${EXTEN:1}
include => default

  Regards



  Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041004/a9b03988/attachment.htm

I hope you just retyped these conf files and did not cut and paste.   

The first config file is /etc/zaptel.conf  and the second one should be
/etc/zapata.conf and not the filenames you posted.  And in extensions.conf, you
have more than one step one in [incoming].

Did you do a modprobe zaptel and modprobe wcfxo? Also two v's in the ztcfg
command is a more usefull output.  ztcfg -vv

Also have you checked to make sure the two cards are on seperate and unique
IRQ's and not sharing IRQ's with any other device?

Lyle
  ----- Original Message ----- 
  From: Samantha (Femtech) 
  To: asterisk-users@lists.digium.com 
  Sent: Monday, October 04, 2004 7:19 AM
  Subject: [Asterisk-Users] Re Problem with Asterisk 2 fx100 cards


  Hi

  I have installed 2 fx0 cards into a machine
  1 for pstn (out)  and the other for pstn (in)
  However I can get the first card (pstnout to work fine)
  I have swapped the cards and both work
  I am also unable to make outgoign on the second card



  ztcfg -v shows
  r2d2:/etc/asterisk# ztcfg -v

  Zaptel Configuration
  =====================

  2 channels configured.


  My /etc/zapdata.conf file
  #
  fxsks=1,2
  loadzone=au
  defaultzone=au

  My /etc/asterisk/zapdata.conf
  context=pstnin
  group=1
  pickupgroup=1
  immediate=yes
  musiconhold=default channel => 1
  ;
  context=incoming
  group=1
  signalling=fxs_ks
  callerid=asreceived
  immediate=yes
  channel =>2


  My /etc/asterisk/extensions.conf
  [pstnin]
  exten => s,1,Wait,0
  exten => s,2,Answer
  exten => s,3,DISA,no-password|default
  include => default

  [incoming]
  exten => s,1,Wait,0
  exten => s,2,Answer
  exten => s,1,DISA,no-password|default
  include => default


   
  Any Ideas?



  Samantha



------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users@lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20041004/4a51a504/attachment.htm