search for: fx0

Sorry for the very newbie-like question. I have the FXS part straight. The part I don't understand is the FX0 part. Will I need the FX0 card if I am connecting to a service like FWD? My goal is to get rid of my phone line all together. I am under the impression I will only need an FX0 if I'm connecting to the central office side of the phone connection or to an existing PBX. Bottom line, will I nee...

Hi: I have a machine with four interfaces connecting four different networks. I am learning to use nmap and trying to force the nmap working only one interface. As nmap man page states, I use -e option and it would not work: nmap -e fx0 -v -sP 192.168.128.0/23 Starting Nmap 3.95 ( http://www.insecure.org/nmap/ ) at 2006-02-04 14:04 CST getinterfaces: Failed to open ethernet interface (el0) QUITTING! What did I do wrong? Thanks __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the...

I have a question on Asterisk and whether it will work with the following design. Install ASTERISK on the external side of the Network. Purchase an AudioCodes 4/8 port Analog Fx0 gateway. So far everything seems straight forward. Here is the twist. The company currently has Cisco Call Manager 3.3 which does not support SIP Trunking. But it does have a VG248. I would like to place 4 lines through the Cisco Call Manager. I want to set up a dial plan where 7 would grab the...

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR system. (IVR is not at present running Asterisk old dialogic system has FX0 ports) At the Hotel they dial there local extension lets sa...

Hi List Is there a cron that I con do to replace this, as the fx0 card doesnt hang up properly phonegc:/home/samantha# asterisk -r Asterisk CVS-05/30/03-17:17:07, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <markster@linux-support.net> ========================================================================= Connected to As...

Dear group, Was wondering if anyone out there has had the experience I have been having. In reading recent posts on echo cancellation, I think there is.... We recently cut over the Asterisk and are configured with 5 FXS and 2 FXO ports to the PSTN via 2 TDM400P's and 5 SIP phones on our local network. I have set up echo cancellation with 800ms echo training. I do not have

Dear all, I have an FX0 card installed in * and connected to a PBX. Calling works ok ( both in bound /out bound) but after the call, I have to press the '#' key to terminate the call, otherwise the line stays busy. Anybody has a fix for that? Thank you. Anthony

...e: I have one analog line, 4 analog telephones. Do I need a TDM400P + 4 FXS modules (Green) + X100P? Scenario Two: 2 analog lines, 1 selective ring number for fax, 8 analog phones. Is this what I need? 2 TDM400Ps and 8 FXS for 8 phones 2 X100Ps for 2 lines or maybe: 3 TDM400Ps and 8 FXS and two FX0 modules (Red) Thank you, Jeff Borders

I am blessed with this user forum and able to set my Dev-PCI Digium card working fine with the Asterisk server of mine (i)But today i just wanted to know if someone can help me to set X-Ten Lite to call PSTN line using my FX0 Currently , I am able to use X Lite to call another X lite user locally (LAN) I also has attached my setting together Thanking you all in advance -------------- next part -------------- {\rtf1\ansi\deff0{\fonttbl{\f0\fswiss\fcharset0 Arial;}} {\*\generator Msftedit 5.41.15.1507;}\viewkind4\u...

Hi, I am trying to do the world's most simple install. I have a Wildcard TDM400P with 3 ports: 1 FXS on port 1 and 2 FXOs on ports 3 and 4. (i'm not using port 3 for now, put want it for expansion purposes) I simply (to start with) am looking to have the FXS phone ring when an FX0 port is dialed. I would also like to be able to place outgoing calls on the FXS through the FXO. Right now, I'm not interested in SIP or IAX... thats for me to handle later! I have the following *3* files: ***/etc/zaptel.conf*** # Zaptel conf fxoks=1 fxsks=3-4 loadzone=us defaultzone=us **...

Hi I have installed 2 fx0 cards into a machine 1 for pstn (out) and the other for pstn (in) However I can get the first card (pstnout to work fine) I have swapped the cards and both work I am also unable to make outgoign on the second card ztcfg -v shows r2d2:/etc/asterisk# ztcfg -v Zaptel Configuration ===============...

...tes the convolutions using fft(), but we are not familiar enough with the latter to assess if the above issues are some sort of bugs or normal behavior. In the latter case, is there is any workaround? Any help/comments/ideas appreciated. === EXAMPLES === panjer <- function(fx, lambda) { fx0 <- fx[1] fx <- fx[-1] r <- length(fx) cumul <- fs <- exp(-lambda * (1 - fx0)) repeat { x <- length(fs) m <- min(x, r) fs <- c(fs, sum((lambda * 1:m / x) * head(fx, m) * rev(tail(fs, m)))) if ((1-1E-8) < (cumul <- cumu...

...t the R session always automatically crash after some running time. Does anyone here familiar with Rcpp and inline? What¡¯s the problem in the following code? I have checked the input values, no NA and other strange value exists. Thank you for your attention! > mkc <- cxxfunction( signature(fx0="vector",fy0="vector",fsp0="vector", x0="vector",y0="vector",sp0="vector",phyd0="matrix", rmax0="numeric",step0="numeric",binlength0="integer"), paste(readLine...

...t the R session always automatically crash after some running time. Does anyone here familiar with Rcpp and inline? What¡¯s the problem in the following code? I have checked the input values, no NA and other strange value exists. Thank you for your attention! > mkc <- cxxfunction( signature(fx0="vector",fy0="vector",fsp0="vector", x0="vector",y0="vector",sp0="vector",phyd0="matrix", rmax0="numeric",step0="numeric",binlength0="integer"), paste(readLine...

...om FXS and the other form FXO no. Test 1, work fine: 1) A (FXS-1) --- call ----> B(FXS-2) 2) B (FXS-2) press #1 (blind transfer) after that press dtmf 9 (to dial FXO-1). 3) B hungup. 4) A ---- connected to ---- linea externa FXO-1. Test 2, did't work. 1) A (FXS-1) --- call ----> B(FX0-1) 2) B (FX0-1) digita #1 (blind transfer), listen tone and when press any dtm the call hungup. Bellow you can see, log when we try a blind transfer from FXO. [Aug 18 09:16:58] DEBUG[4756]: features.c:2053 ast_feature_interpret: Feature interpret: chan=SIP/gustavo-00000002, peer=DAHDI/65-1, cod...

It seems to me silly to have a T1/E1 card to connect to a channel bank when you could just have a 24/30 way FXS card in the slot in the first place. Does such a thing exist? Wouldn't Digium have a lot of customers if they could produce one for say < $1000 retail?

I'm using Asterisk on a system described as below: Asterisk version 1.0.5 on Linux Debian version 3.0 (unstable) with kernel version 2.6.10 (hardware: PC, i386 class). My Asterisk works with a phone card Digium TDM400P, where 2 FXS and 2 FX0 modules are provided. It works, but I notice an annoying delay on incoming calls from analog phones: system answers only after about 2 seconds, even if the first command is "answer()". If I request an external line and therefore I dial "0", I have to wait 2 seconds to listen to...

TDM04B whit 4 FX0 modules spandsp 2pre18 AMD XP box asterisk@home when i try to send a fax this fails on sender side in a middle of transmition, the receive side(* box) keep working 35 seconds on RxFax command after sender hang up, and no tif file has generated. in other post have a info about frame slips, but...

...new Apple store on Sat to buy some stuff for my Mini, and I notice some Snom 360's on the sales counter. Venturing a question, I ask, are they using Asterisk? Guys says yes. Cool! I said: What kind of box are you using. He points to a Mini sitting on the counter! 2 X cool! He's using a SIP-FX0 converter. Plug: http://www.mymacdealer.com great store in Alberta. Anyone else ran across Asterisk in a setting that they would not have expected? I like these stories. -----Original Message----- From: C F [mailto:shmaltz@gmail.com] Sent: Friday, June 03, 2005 9:48 AM To: Asterisk Users Mailin...

> > I am looking for "how to" information / references on use of either Audiocodes MP104 or 108, or Vega 50 Gateways for interconecting Asterisk to the PSTN via FX0 interfaces. > > Any info of references / personnal experiences would be appreciated > > Stratus? THE WORLD'S MOST RELIABLE SERVERS * > Richard C. Sparacino > Telecom Technology Manager > Tel: (978) 461 7578 > Fax: (978) 461 3620 > Email: Rich_Sparacino@stratus...