Giovanni
2010-Jun-13 23:42 UTC
[zfs-discuss] Unable to Install 2009.06 on BigAdmin Approved MOBO - FILE SYSTEM FULL
Hi Guys I am having trouble installing Opensolaris 2009.06 into my Biostar Tpower I45 motherboard, approved on BigAdmin HCL here: http://www.sun.com/bigadmin/hcl/data/systems/details/26409.html -- why is it not working? My setup: 3x 1TB hard-drives SATA 1x 500GB hard-drive (I have only left this hdd connected to try to isolate the issue, still happens) 4GB DDR2 PC2-6400 Ram (tested GOOD!) ATI Radeon 4650 512MB DDR2 PCI-E 16x Motherboard default settings/CMOS cleared Here''s what happens: Opensolaris boot options come up, I choose the first default "OPensolaris 2009.06" -- I HAVE ALSO TRIED VESA DRIVES and Command line, all of these fail. ------------------------------------- After Select desktop language, configuring devices. Mounting cdroms Reading ZFS Config: done. opensolaris console login: (cd rom is still being accessed at this time).. few seconds later: then opensolaris ufs: NOTICE: alloc: /: file system full opensolaris last message repeated 1 time opensolaris syslogd: /var/adm/messages: No space left on device opensolaris in.routed[537]: route 0.0.0.0/8 -> 0.0.0.0 nexthop is not directly connected --- I logged in as jack / jack on the console and did a df -h /devices/ramdisk:a = size 164M 100% used mount / swap 3.3GB used 860K 1% /mnt/misc/opt 210MB used 210M 100% /mnt/misc /usr/lib/libc/libc_hwcap1.so.1 2.3G used 2.3G 100% /lib/libc.so.1 /dev/dsk/c7t0d0s2 677M used 677M 100% /media/OpenSolaris Thanks for any help! -- This message posted from opensolaris.org
Cindy Swearingen
2010-Jun-14 17:44 UTC
[zfs-discuss] Unable to Install 2009.06 on BigAdmin Approved MOBO - FILE SYSTEM FULL
Hi Giovanni, My Monday morning guess is that the disk/partition/slices are not optimal for the installation. Can you provide the partition table on the disk that you are attempting to install? Use format-->disk-->partition-->print. You want to put all the disk space in c*t*d*s0. See this section of the ZFS troubleshooting guide for an example of fixing the disk/partition/ slice issues: http://www.solarisinternals.com/wiki/index.php/ZFS_Troubleshooting_Guide Replacing/Relabeling the Root Pool Disk Thanks, Cindy On 06/13/10 17:42, Giovanni wrote:> Hi Guys > > I am having trouble installing Opensolaris 2009.06 into my Biostar Tpower I45 motherboard, approved on BigAdmin HCL here: > > http://www.sun.com/bigadmin/hcl/data/systems/details/26409.html -- why is it not working? > > My setup: > 3x 1TB hard-drives SATA > 1x 500GB hard-drive (I have only left this hdd connected to try to isolate the issue, still happens) > 4GB DDR2 PC2-6400 Ram (tested GOOD!) > ATI Radeon 4650 512MB DDR2 PCI-E 16x > Motherboard default settings/CMOS cleared > > Here''s what happens: Opensolaris boot options come up, I choose the first default "OPensolaris 2009.06" -- I HAVE ALSO TRIED VESA DRIVES and Command line, all of these fail. > ------------------------------------- > > After Select desktop language, > > configuring devices. > Mounting cdroms > Reading ZFS Config: done. > > opensolaris console login: (cd rom is still being accessed at this time).. few seconds later: > > then opensolaris ufs: NOTICE: alloc: /: file system full > opensolaris last message repeated 1 time > opensolaris syslogd: /var/adm/messages: No space left on device > opensolaris in.routed[537]: route 0.0.0.0/8 -> 0.0.0.0 nexthop is not directly connected > > --- > > I logged in as jack / jack on the console and did a df -h > > /devices/ramdisk:a = size 164M 100% used mount / > swap 3.3GB used 860K 1% > /mnt/misc/opt 210MB used 210M 100% /mnt/misc > > /usr/lib/libc/libc_hwcap1.so.1 2.3G used 2.3G 100% /lib/libc.so.1 > > /dev/dsk/c7t0d0s2 677M used 677M 100% /media/OpenSolaris > > Thanks for any help!