Hello!
I have testing new xen 4.1.0 with Debian Wheezy.
I have an strange problem. When I try to boot the DomU with disks in local img
works Ok:
disk=[''file:/VMs/plantilla-squeeze-disk.img,xvda1,w'',
''file:/VMs/plantilla-squeeze-swap.img,xvda2,w'']
but when I try to boot with the same disk offered with iSCSI: (open-iscsi,
login, ...)
disk=[''phy:/dev/disk/by-label/PLANTILLA_D1,xvda1,w'',
''phy:/dev/disk/by-label/PLANTILLA_SW,xvda2,w'']
the VM do not boot. Below are the console messages:
...
[ 0.241307] Initialising Xen virtual ethernet driver.
[ 5.340090] XENBUS: Waiting for devices to initialise:
295s...290s...285s...280s...275s...270s...265s...260s...255s...250s...245s...240s...udevd[59]:
timeout: killing ''/sbin/modprobe -b xen:vbd'' [69]
udevd[59]: ''/sbin/modprobe -b xen:vbd'' [69] terminated by
signal 9 (Killed)
udevd[61]: timeout: killing ''/sbin/modprobe -b xen:vbd'' [70]
[ 300.244208] XENBUS: Timeout connecting to device: device/vbd/51713 (local
state 3, remote state 1)
[ 300.244309] XENBUS: Timeout connecting to device: device/vbd/51714 (local
state 3, remote state 1)
udevd[61]: ''/sbin/modprobe -b xen:vbd'' [70] terminated by
signal 9 (Killed)
...
[ 300.290933] Fusion MPT base driver 3.04.18
[ 300.290943] Copyright (c) 1999-2008 LSI Corporation
[ 300.310304] SCSI subsystem initialized
[ 300.323846] loop: module loaded
[ 300.352868] Event-channel device installed.
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Waiting for root file system ...
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-label/PLANTILLA_D1 does not exist. Dropping to a shell!
BusyBox v1.18.4 (Debian 1:1.18.4-2) built-in shell (ash)
Enter ''help'' for a list of built-in commands.
/bin/sh: can''t access tty; job control turned off
(initramfs)
...
In xen 3.4 with Debian lenny that conf works Ok.
Any pointer, please?
Agustin
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
