thr3ads.net - Xen users - [Xen-users] (no subject) [Jan 2011]

If this information is useful, please help other people find it:
Share via:

Scott A. Wozny

2011-Jan-09 02:16 UTC

[Xen-users] (no subject)

OK, so after several weeks of trying to get various versions of Xen running of
various distributions, I''m starting to wonder if I''ve got a
hardware compatibility problem and as the system never really boots with the Xen
kernel I''ve got no log files to tell me where the problem is.  I was
wondering if there''s a way to compile from source with debug turned on,
particularly for early boot problems, and where those logs get stored.
 
In my research, it seems like everyone who has had problems getting Xen running
has fixed it through errors reported during the compile process and correcting
source files to match but I''ve been poring through the thousands of
lines of output produced by the various makes I''ve been doing in
different distro and source combinations and I can''t find anything that
says "You have a problem here".  They just compile cleanly and then
don''t boot.
 
Any and all suggestions would be greatly appreciated.
 
Thanks,
 
Scott 		 	   		  

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Vladislav Krakhalev

2011-Jan-09 07:13 UTC

head link

Re: [Xen-users] (no subject)

Hi!

On which state the loading of xen kernel stops? What are you seeing on
display in that moment?
Can you put dmesg here?

2011/1/9 Scott A. Wozny <sawozny@hotmail.com>
>  OK, so after several weeks of trying to get various versions of Xen
> running of various distributions, I''m starting to wonder if
I''ve got a
> hardware compatibility problem and as the system never really boots with
the
> Xen kernel I''ve got no log files to tell me where the problem is. 
I was
> wondering if there''s a way to compile from source with debug
turned on,
> particularly for early boot problems, and where those logs get stored.
>
> In my research, it seems like everyone who has had problems getting Xen
> running has fixed it through errors reported during the compile process and
> correcting source files to match but I''ve been poring through the
thousands
> of lines of output produced by the various makes I''ve been doing
in
> different distro and source combinations and I can''t find anything
that says
> "You have a problem here".  They just compile cleanly and then
don''t boot.
>
> Any and all suggestions would be greatly appreciated.
>
> Thanks,
>
> Scott
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
>

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Scott A. Wozny

2011-Jan-09 21:11 UTC

head link

RE: [Xen-users] (no subject)

First of all, sorry about the lack of a subject on the email.  I''m
usually better about that stuff.
 
Anyway, the boot sequence goes by pretty fast, but here is the results of
booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built per
the instructions found at 
http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/
:


Grub Entry:
root (hd0,0)
kernel /xen-3.4.3.gz
module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
module /initrd.img-2.6.18.8-xen


Boot results:


Booting ''Xen 3.4.3 / Debian GNU/Linux, kernel 2.6.18.8-xen''


root (hd0,0)
 Filesystem type is extfs2, partition type 0x83
kernel /xen-3.4.3.gz
   [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078,
entry=0x100000]

module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
   [Multiboot-module @0x298000, 0x7412d8 bytes]
module /initrd.img-2.6.18.8-xen
   [Multiboot-module @0x9d (this line displays to varying lengths each time, but
it goes by so fast I can''t get the rest of it before the machine
reboots)




A different xen kernel also showed up in my grub that doesn''t reboot,
but also doesn''t boot properly.  Here are the results of that if it
helps:


Grub entry:
root (hd0,0)
kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
initrd /initrd.img-2.6.18.8-xen


Boot results:


   Booting ''Debian GNU/Linux, kernel 2.6.18.8-xen''


root (hd0,0)
 Filesystem type is extfs2, partition type 0x83
kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet


Error 13: Invalid or unsupported executable format


Press any key to continue...
 
Here are the dmesg file contents once I booted back into the original kernel
built as part of the Debian 5.0.7 install (if you can recommend any good
resources on interpreting dmesg output I''d appreciate it; in the
meantime I''ll start with Google; also, there was a TV card and modem in
the machine that an earlier version of the dmesg file was complaining about
compatibility; I don''t need either so I''ve pulled them out of
the machine and these are the results of the machine booting without them, but
do you think I should do a full reinstall now that they''re gone?):
 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Thu Nov 25 04:30:55 UTC 2010
[    0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200
used
[    0.000000] max_pfn_mapped = 2293760
[    0.000000] init_memory_mapping
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717 MSFT      
97)
[    0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717 MSFT      
97)
[    0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1  8A7G1 8A7G1-C0        4 INTL
20051117)
[    0.000000] ACPI: FACS CFFAE000, 0040
[    0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717 MSFT      
97)
[    0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG  20090717 MSFT      
97)
[    0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717 MSFT      
97)
[    0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT  20090717 MSFT      
97)
[    0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717 MSFT      
97)
[    0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717 MSFT      
97)
[    0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS  NVHDCP  20090717 MSFT      
97)
[    0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717 MSFT      
97)
[    0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm    CpuPm       12 INTL
20051117)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000230000000
[    0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200
used
[    0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[    0.000000]   NODE_DATA [0000000000012000 - 0000000000016fff]
[    0.000000]   bootmap [0000000000017000 -  000000000005cfff] pages 46
[    0.000000]   early res: 0 [0-fff] BIOS data page
[    0.000000]   early res: 1 [6000-7fff] TRAMPOLINE
[    0.000000]   early res: 2 [200000-675397] TEXT DATA BSS
[    0.000000]   early res: 3 [378c2000-37fef99a] RAMDISK
[    0.000000]   early res: 4 [9bc00-fffff] BIOS reserved
[    0.000000]   early res: 5 [8000-11fff] PGTABLE
[    0.000000]  [ffffe20000000000-ffffe20002dfffff] PMD ->
[ffff810001200000-ffff810003ffffff] on node 0
[    0.000000]  [ffffe20003800000-ffffe20007bfffff] PMD ->
[ffff81000c000000-ffff8100103fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  2293760
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      155
[    0.000000]     0:      256 ->   851872
[    0.000000]     0:  1048576 ->  2293760
[    0.000000] On node 0 totalpages: 2096955
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1256 pages reserved
[    0.000000]   DMA zone: 2683 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833496 pages, LIFO batch:31
[    0.000000]   Normal zone: 17024 pages used for memmap
[    0.000000]   Normal zone: 1228160 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffa0000 - 00000000cffae000
[    0.000000] PM: Registered nosave memory: 00000000cffae000 - 00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[    0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 2064339
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro quiet
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] time.c: Detected 2333.293 MHz processor.
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] Calgary: detecting Calgary via BIOS EBDA area
[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
[    0.004000] Memory: 8192680k/9175040k available (2229k kernel code, 195140k
reserved, 1084k data, 392k init)
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] hpet clockevent registered
[    0.083840] Calibrating delay using timer specific routine.. 4671.46 BogoMIPS
(lpj=9342927)
[    0.083878] Security Framework initialized
[    0.083884] SELinux:  Disabled at boot.
[    0.083887] Capability LSM initialized
[    0.084005] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[    0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.090266] Mount-cache hash table entries: 256
[    0.090428] Initializing cgroup subsys ns
[    0.090433] Initializing cgroup subsys cpuacct
[    0.090436] Initializing cgroup subsys devices
[    0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.090459] CPU: L2 cache: 2048K
[    0.090461] CPU 0/0 -> Node 0
[    0.090462] CPU: Physical Processor ID: 0
[    0.090463] CPU: Processor Core ID: 0
[    0.090471] CPU0: Thermal monitoring enabled (TM2)
[    0.090472] using mwait in idle threads.
[    0.091391] ACPI: Core revision 20080321
[    0.142651] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.142654] Using local APIC timer interrupts.
[    0.148009] APIC timer calibration result 20833012
[    0.148009] Detected 20.833 MHz APIC timer.
[    0.148009] Booting processor 1/1 ip 6000
[    0.156009] Initializing CPU#1
[    0.156009] Calibrating delay using timer specific routine.. 4666.64 BogoMIPS
(lpj=9333287)
[    0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.156009] CPU: L2 cache: 2048K
[    0.156009] CPU 1/1 -> Node 0
[    0.156009] CPU: Physical Processor ID: 0
[    0.156009] CPU: Processor Core ID: 1
[    0.156009] CPU1: Thermal monitoring enabled (TM2)
[    0.236014] CPU1: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.240015] Booting processor 2/2 ip 6000
[    0.248015] Initializing CPU#2
[    0.248015] Calibrating delay using timer specific routine.. 4666.71 BogoMIPS
(lpj=9333433)
[    0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.248015] CPU: L2 cache: 2048K
[    0.248015] CPU 2/2 -> Node 0
[    0.248015] CPU: Physical Processor ID: 0
[    0.248015] CPU: Processor Core ID: 2
[    0.248015] CPU2: Thermal monitoring enabled (TM2)
[    0.327750] CPU2: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.332020] Booting processor 3/3 ip 6000
[    0.340021] Initializing CPU#3
[    0.340021] Calibrating delay using timer specific routine.. 4666.67 BogoMIPS
(lpj=9333345)
[    0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.340021] CPU: L2 cache: 2048K
[    0.340021] CPU 3/3 -> Node 0
[    0.340021] CPU: Physical Processor ID: 0
[    0.340021] CPU: Processor Core ID: 3
[    0.340021] CPU3: Thermal monitoring enabled (TM2)
[    0.419670] CPU3: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.424026] Brought up 4 CPUs
[    0.424026] Total of 4 processors activated (18671.49 BogoMIPS).
[    0.424026] CPU0 attaching sched-domain:
[    0.424026]  domain 0: span 0-1
[    0.424026]   groups: 0 1
[    0.424026]   domain 1: span 0-3
[    0.424026]    groups: 0-1 2-3
[    0.424026]    domain 2: span 0-3
[    0.424026]     groups: 0-3
[    0.424026] CPU1 attaching sched-domain:
[    0.424026]  domain 0: span 0-1
[    0.424026]   groups: 1 0
[    0.424026]   domain 1: span 0-3
[    0.424026]    groups: 0-1 2-3
[    0.424026]    domain 2: span 0-3
[    0.424026]     groups: 0-3
[    0.424026] CPU2 attaching sched-domain:
[    0.424026]  domain 0: span 2-3
[    0.424026]   groups: 2 3
[    0.424026]   domain 1: span 0-3
[    0.424026]    groups: 2-3 0-1
[    0.424026]    domain 2: span 0-3
[    0.424026]     groups: 0-3
[    0.424026] CPU3 attaching sched-domain:
[    0.424026]  domain 0: span 2-3
[    0.424026]   groups: 3 2
[    0.424026]   domain 1: span 0-3
[    0.424026]    groups: 2-3 0-1
[    0.424026]    domain 2: span 0-3
[    0.424026]     groups: 0-3
[    0.424026] net_namespace: 1224 bytes
[    0.424026] Booting paravirtualized kernel on bare hardware
[    0.424026] NET: Registered protocol family 16
[    0.424026] ACPI: bus type pci registered
[    0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.424026] PCI: Not using MMCONFIG.
[    0.424026] PCI: Using configuration type 1 for base access
[    0.428602] ACPI: EC: Look up EC in DSDT
[    0.447520] ACPI: Interpreter enabled
[    0.447523] ACPI: (supports S0 S1 S3 S4 S5)
[    0.447539] ACPI: Using IOAPIC for interrupt routing
[    0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.470851] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.500771] PCI: Transparent bridge - 0000:00:09.0
[    0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
[    0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[    0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7
[    0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[    0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[    0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[    0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
[    0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
[    0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[    0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[    0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
[    0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[    0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[    0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[    0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[    0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
[    0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[    0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[    0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[    0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
[    0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
[    0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.540903] pnp: PnP ACPI init
[    0.540903] ACPI: bus type pnp registered
[    0.540903] pnp 00:00: parse allocated resources
[    0.540903] pnp 00:00:   add io  0xcf8-0xcff flags 0x1
[    0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.540903] pnp 00:01: parse allocated resources
[    0.540903] pnp 00:01:   add dma 4 flags 0x4
[    0.540903] pnp 00:01:   add io  0x0-0xf flags 0x1
[    0.540903] pnp 00:01:   add io  0x81-0x83 flags 0x1
[    0.540903] pnp 00:01:   add io  0x87-0x87 flags 0x1
[    0.540903] pnp 00:01:   add io  0x89-0x8b flags 0x1
[    0.540903] pnp 00:01:   add io  0x8f-0x8f flags 0x1
[    0.540903] pnp 00:01:   add io  0xc0-0xdf flags 0x1
[    0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.540926] pnp 00:02: parse allocated resources
[    0.540930] pnp 00:02:   add io  0x61-0x61 flags 0x1
[    0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.544903] pnp 00:03: parse allocated resources
[    0.544903] pnp 00:03:   add io  0xf0-0xff flags 0x1
[    0.544903] pnp 00:03:   add irq 13 flags 0x1
[    0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.544903] pnp 00:04: parse allocated resources
[    0.544903] pnp 00:04:   add io  0x10-0x1f flags 0x1
[    0.544903] pnp 00:04:   add io  0x22-0x3f flags 0x1
[    0.544903] pnp 00:04:   add io  0x44-0x4d flags 0x1
[    0.544903] pnp 00:04:   add io  0x50-0x5f flags 0x1
[    0.544903] pnp 00:04:   add io  0x62-0x63 flags 0x1
[    0.544903] pnp 00:04:   add io  0x65-0x6f flags 0x1
[    0.544903] pnp 00:04:   add io  0x72-0x7f flags 0x1
[    0.544903] pnp 00:04:   add io  0x80-0x80 flags 0x1
[    0.544903] pnp 00:04:   add io  0x84-0x86 flags 0x1
[    0.544903] pnp 00:04:   add io  0x88-0x88 flags 0x1
[    0.544903] pnp 00:04:   add io  0x8c-0x8e flags 0x1
[    0.544903] pnp 00:04:   add io  0x90-0x9f flags 0x1
[    0.544903] pnp 00:04:   add io  0xa2-0xbf flags 0x1
[    0.544903] pnp 00:04:   add io  0xe0-0xef flags 0x1
[    0.544903] pnp 00:04:   add io  0x4d0-0x4d1 flags 0x1
[    0.544903] pnp 00:04:   add io  0x800-0x80f flags 0x1
[    0.544903] pnp 00:04:   add io  0x4000-0x407f flags 0x1
[    0.544903] pnp 00:04:   add io  0x4080-0x40ff flags 0x1
[    0.544903] pnp 00:04:   add io  0x4400-0x447f flags 0x1
[    0.544903] pnp 00:04:   add io  0x4480-0x44ff flags 0x1
[    0.544903] pnp 00:04:   add io  0x4800-0x487f flags 0x1
[    0.544903] pnp 00:04:   add io  0x4880-0x48ff flags 0x1
[    0.544903] pnp 00:04:   add mem 0x0-0xffffffffffffffff flags 0x10000000
[    0.544903] pnp 00:04:   add mem 0xfefe2000-0xfefe3fff flags 0x0
[    0.544903] pnp 00:04:   add mem 0xfefe1000-0xfefe1fff flags 0x0
[    0.544903] pnp 00:04:   add mem 0xfee01000-0xfeefffff flags 0x0
[    0.544903] pnp 00:04: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.544903] pnp 00:05: parse allocated resources
[    0.544903] pnp 00:05:   add mem 0xfed00000-0xfed00fff flags 0x1
[    0.544903] pnp 00:05:   add irq 8 flags 0x1
[    0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.544903] pnp 00:06: parse allocated resources
[    0.544903] pnp 00:06:   add io  0x70-0x71 flags 0x1
[    0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.544903] pnp 00:07: parse allocated resources
[    0.544903] pnp 00:07:   add mem 0xfec00000-0xfec00fff flags 0x0
[    0.544903] pnp 00:07:   add mem 0xfee00000-0xfee00fff flags 0x0
[    0.544903] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.544903] pnp 00:08: parse allocated resources
[    0.544903] pnp 00:08:   add io  0x60-0x60 flags 0x1
[    0.544903] pnp 00:08:   add io  0x64-0x64 flags 0x1
[    0.544903] pnp 00:08:   add irq 1 flags 0x1
[    0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[    0.548903] pnp 00:09: parse allocated resources
[    0.548903] pnp 00:09:   add irq 12 flags 0x1
[    0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
(active)
[    0.548903] pnp 00:0a: parse allocated resources
[    0.548903] pnp 00:0a:   add io  0x0-0xffffffffffffffff flags 0x10000001
[    0.548903] pnp 00:0a:   add io  0xa00-0xa0f flags 0x1
[    0.548903] pnp 00:0a:   add io  0xa10-0xa1f flags 0x1
[    0.548903] pnp 00:0a:   add io  0xa20-0xa2f flags 0x1
[    0.548903] pnp 00:0a:   add io  0xa30-0xa3f flags 0x1
[    0.548903] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.548903] pnp 00:0b: parse allocated resources
[    0.548903] pnp 00:0b:   add mem 0xe0000000-0xefffffff flags 0x0
[    0.548903] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.548903] pnp 00:0c: parse allocated resources
[    0.548903] pnp 00:0c:   add mem 0x0-0x9ffff flags 0x1
[    0.548903] pnp 00:0c:   add mem 0xc0000-0xcffff flags 0x0
[    0.548903] pnp 00:0c:   add mem 0xe0000-0xfffff flags 0x0
[    0.548903] pnp 00:0c:   add mem 0x100000-0xcfffffff flags 0x1
[    0.548903] pnp 00:0c:   add mem 0xfec00000-0xffffffff flags 0x0
[    0.548903] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[    0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.554581] pnp: PnP ACPI: found 13 devices
[    0.554581] ACPI: ACPI bus type pnp unregistered
[    0.554581] usbcore: registered new interface driver usbfs
[    0.554581] usbcore: registered new interface driver hub
[    0.554581] usbcore: registered new device driver usb
[    0.554581] PCI: Using ACPI for IRQ routing
[    0.571245] PCI-GART: No AMD northbridge found.
[    0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.571257] hpet0: 4 64-bit timers, 25000000 Hz
[    0.575216] ACPI: RTC can wake from S4
[    0.578101] Switched to high resolution mode on CPU 0
[    0.578546] Switched to high resolution mode on CPU 1
[    0.578551] Switched to high resolution mode on CPU 3
[    0.579207] Switched to high resolution mode on CPU 2
[    0.590046] pnp: the driver ''system'' has been registered
[    0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.590062] system 00:04: ioport range 0x800-0x80f has been reserved
[    0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved
[    0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved
[    0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved
[    0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved
[    0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved
[    0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved
[    0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved
[    0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved
[    0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.590087] system 00:04: driver attached
[    0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
[    0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
[    0.590099] system 00:07: driver attached
[    0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[    0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[    0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[    0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[    0.590115] system 00:0a: driver attached
[    0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.590122] system 00:0b: driver attached
[    0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
[    0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not be
reserved
[    0.590140] system 00:0c: driver attached
[    0.593429] PCI: Bridge: 0000:00:09.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: disabled.
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Bridge: 0000:00:0c.0
[    0.593429]   IO window: e000-efff
[    0.593429]   MEM window: 0xfa000000-0xfeafffff
[    0.593429]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[    0.593429] PCI: Bridge: 0000:00:15.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: disabled.
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Bridge: 0000:00:16.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: disabled.
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Bridge: 0000:00:17.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: 0xfeb00000-0xfebfffff
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Bridge: 0000:00:18.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: disabled.
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64
[    0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[    0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0] -> GSI
23 (level, low) -> IRQ 23
[    0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[    0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3] -> GSI
22 (level, low) -> IRQ 22
[    0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64
[    0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[    0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4] -> GSI
21 (level, low) -> IRQ 21
[    0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64
[    0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
[    0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5] -> GSI
20 (level, low) -> IRQ 20
[    0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64
[    0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
[    0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6] -> GSI
23 (level, low) -> IRQ 23
[    0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64
[    0.593430] NET: Registered protocol family 2
[    0.642185] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[    0.644364] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[    0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.649453] TCP: Hash tables configured (established 524288 bind 65536)
[    0.649456] TCP reno registered
[    0.658058] NET: Registered protocol family 1
[    0.658160] checking if image is initramfs... it is
[    1.186404] Freeing initrd memory: 7350k freed
[    1.191507] audit: initializing netlink socket (disabled)
[    1.191507] type=2000 audit(1294606162.172:1): initialized
[    1.201065] Total HugeTLB memory allocated, 0
[    1.201065] VFS: Disk quotas dquot_6.5.1
[    1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.201065] msgmni has been set to 16015
[    1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[    1.201065] io scheduler noop registered
[    1.201065] io scheduler anticipatory registered
[    1.201065] io scheduler deadline registered
[    1.201065] io scheduler cfq registered (default)
[    1.272051] pci 0000:02:00.0: Boot video device
[    1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    1.272968] assign_interrupt_mode Found MSI capability
[    1.272968] Allocate Port Service[0000:00:0c.0:pcie00]
[    1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64
[    1.272968] assign_interrupt_mode Found MSI capability
[    1.272968] Allocate Port Service[0000:00:15.0:pcie00]
[    1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64
[    1.272968] assign_interrupt_mode Found MSI capability
[    1.272968] Allocate Port Service[0000:00:16.0:pcie00]
[    1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64
[    1.272968] assign_interrupt_mode Found MSI capability
[    1.272968] Allocate Port Service[0000:00:17.0:pcie00]
[    1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64
[    1.273122] assign_interrupt_mode Found MSI capability
[    1.273122] Allocate Port Service[0000:00:18.0:pcie00]
[    1.278234] hpet_resources: 0xfed00000 is busy
[    1.278234] Linux agpgart interface v0.103
[    1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[    1.278234] pnp: the driver ''serial'' has been registered
[    1.282230] brd: module loaded
[    1.282230] input: Macintosh mouse button emulation as /class/input/input0
[    1.282230] pnp: the driver ''i8042 kbd'' has been registered
[    1.282230] i8042 kbd 00:08: driver attached
[    1.282230] pnp: the driver ''i8042 aux'' has been registered
[    1.282230] i8042 aux 00:09: driver attached
[    1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq
1,12
[    1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.302218] mice: PS/2 mouse device common for all mice
[    1.302218] pnp: the driver ''rtc_cmos'' has been registered
[    1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.302218] rtc0: alarms up to one year, y3k
[    1.302218] rtc_cmos 00:06: driver attached
[    1.302218] cpuidle: using governor ladder
[    1.302218] cpuidle: using governor menu
[    1.302218] No iBFT detected.
[    1.302563] TCP cubic registered
[    1.302563] NET: Registered protocol family 17
[    1.302563] registered taskstats version 1
[    1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09 20:49:22 UTC
(1294606162)
[    1.302563] Freeing unused kernel memory: 392k freed
[    1.326091] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm  P001Ist       11 INTL
20051117)
[    1.379078] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.379078] ACPI: Processor [P001] (supports 8 throttling states)
[    1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm  P002Ist       12 INTL
20051117)
[    1.379078] ACPI: ACPI0007:01 is registered as cooling_device1
[    1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm  P003Ist       12 INTL
20051117)
[    1.379078] ACPI: ACPI0007:02 is registered as cooling_device2
[    1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm  P004Ist       12 INTL
20051117)
[    1.383072] ACPI: ACPI0007:03 is registered as cooling_device3
[    1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    1.383072] ACPI: Thermal Zone [THRM] (33 C)
[    1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2] -> GSI
22 (level, low) -> IRQ 22
[    1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64
[    1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 1
[    1.556086] ehci_hcd 0000:00:04.1: debug port 1
[    1.556086] PCI: cache line size of 32 is not supported by device
0000:00:04.1
[    1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00
[    1.556731] ohci_hcd: 2006 August 04 USB 1.1 ''Open'' Host
Controller (OHCI) Driver
[    1.560731] No dock devices found.
[    1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[    1.564968] usb usb1: configuration #1 chosen from 1 choice
[    1.564995] hub 1-0:1.0: USB hub found
[    1.565003] hub 1-0:1.0: 6 ports detected
[    1.568731] SCSI subsystem initialized
[    1.580731] libata version 3.00 loaded.
[    1.673459] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.673459] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.673459] usb usb1: Product: EHCI Host Controller
[    1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[    1.673459] usb usb1: SerialNumber: 0000:00:04.1
[    1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[    1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12] -> GSI
21 (level, low) -> IRQ 21
[    1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64
[    1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller
[    1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus
number 2
[    1.673459] ehci_hcd 0000:00:06.1: debug port 1
[    1.673459] PCI: cache line size of 32 is not supported by device
0000:00:06.1
[    1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800
[    1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[    1.689512] usb usb2: configuration #1 chosen from 1 choice
[    1.689537] hub 2-0:1.0: USB hub found
[    1.689543] hub 2-0:1.0: 6 ports detected
[    1.792316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.792319] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.792321] usb usb2: Product: EHCI Host Controller
[    1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[    1.792324] usb usb2: SerialNumber: 0000:00:06.1
[    1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[    1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0] -> GSI
20 (level, low) -> IRQ 20
[    1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64
[    1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 3
[    1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000
[    1.855515] usb usb3: configuration #1 chosen from 1 choice
[    1.855538] hub 3-0:1.0: USB hub found
[    1.855544] hub 3-0:1.0: 6 ports detected
[    1.957533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.957536] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.957538] usb usb3: Product: OHCI Host Controller
[    1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[    1.957541] usb usb3: SerialNumber: 0000:00:04.0
[    1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[    1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11] -> GSI
23 (level, low) -> IRQ 23
[    1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64
[    1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller
[    1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus
number 4
[    1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000
[    2.015521] usb usb4: configuration #1 chosen from 1 choice
[    2.015543] hub 4-0:1.0: USB hub found
[    2.015549] hub 4-0:1.0: 6 ports detected
[    2.105477] usb 2-3: new high speed USB device using ehci_hcd and address 2
[    2.117542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.117545] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    2.117547] usb usb4: Product: OHCI Host Controller
[    2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[    2.117550] usb usb4: SerialNumber: 0000:00:06.0
[    2.121473] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.61.
[    2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[    2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI
22 (level, low) -> IRQ 22
[    2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83 has an
invalid bInterval 30, changing to 8
[    2.275186] usb 2-3: configuration #1 chosen from 1 choice
[    2.278384] usb 2-3: New USB device found, idVendor=0bda, idProduct=0152
[    2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.278384] usb 2-3: Product: USB2.0-CRW
[    2.278384] usb 2-3: Manufacturer: Generic
[    2.278384] usb 2-3: SerialNumber: 20060413092100000
[    2.300419] Initializing USB Mass Storage driver...
[    2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr
00:22:68:3a:6a:b7
[    2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit
lnktim msi desc-v3
[    2.801910] ahci 0000:00:0b.0: version 3.0
[    2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0] -> GSI
21 (level, low) -> IRQ 21
[    2.950553] usb 3-4: new low speed USB device using ohci_hcd and address 2
[    3.169044] usb 3-4: configuration #1 chosen from 1 choice
[    3.169044] usb 3-4: New USB device found, idVendor=04eb, idProduct=e030
[    3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.169044] usb 3-4: Product: Media Center Interface
[    3.169044] usb 3-4: Manufacturer: Device
[    3.517035] usb 4-4: new low speed USB device using ohci_hcd and address 2
[    3.905098] usb 4-4: configuration #1 chosen from 1 choice
[    3.922229] usb 4-4: New USB device found, idVendor=04eb, idProduct=e033
[    3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.922233] usb 4-4: Product: eHome Infrared Transceiver
[    3.922235] usb 4-4: Manufacturer: Northstar System Corp.
[    3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000
[    3.922229] usbcore: registered new interface driver hiddev
[    3.925096] scsi0 : SCSI emulation for USB Mass Storage devices
[    3.925096] usb-storage: device found at 2
[    3.925096] usb-storage: waiting for device to settle before scanning
[    4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f
impl RAID mode
[    4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
[    4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    4.090205] scsi1 : ahci
[    4.090703] scsi2 : ahci
[    4.090703] scsi3 : ahci
[    4.090703] scsi4 : ahci
[    4.090703] scsi5 : ahci
[    4.090703] scsi6 : ahci
[    4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72100 irq
1274
[    4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72180 irq
1274
[    4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72200 irq
1274
[    4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72280 irq
1274
[    4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72300 irq
1274
[    4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72380 irq
1274
[    4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
[    4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.659284] ata1.00: configured for UDMA/133
[    5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
[    5.142984] ata2.00: configured for UDMA/100
[    5.467117] ata3: SATA link down (SStatus 0 SControl 300)
[    6.082425] ata4: SATA link down (SStatus 0 SControl 300)
[    6.405773] ata5: SATA link down (SStatus 0 SControl 300)
[    6.725774] ata6: SATA link down (SStatus 0 SControl 300)
[    7.115290] scsi 1:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2 01.0
PQ: 0 ANSI: 5
[    7.115290] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH15F     EG00
PQ: 0 ANSI: 5
[    7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19
[    7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A] -> GSI
19 (level, low) -> IRQ 19
[    7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64
[    7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] 
MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    7.467156] Driver ''sd'' needs updating - please use
bus_type methods
[    7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135
MB)
[    7.467156] sd 1:0:0:0: [sda] Write Protect is off
[    7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
[    7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135
MB)
[    7.467156] sd 1:0:0:0: [sda] Write Protect is off
[    7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
[    7.467156]  sda:<4>Driver ''sr'' needs updating -
please use bus_type methods
[    7.484514]  sda1 sda2
[    7.484644] sd 1:0:0:0: [sda] Attached SCSI disk
[    7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda
tray
[    7.712076] Uniform CD-ROM driver Revision: 3.20
[    7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    9.251645] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00995efa00016c20]
[   11.721065] usb-storage: device scan complete
[   11.721065] scsi 0:0:0:0: Direct-Access     Generic- Compact Flash    1.00
PQ: 0 ANSI: 0 CCS
[   12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[   12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0
[   17.887389] usbhid: timeout initializing reports
[   17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW] on
usb-0000:00:06.1-3
[   17.887477] usbcore: registered new interface driver usb-storage
[   17.887480] USB Mass Storage support registered.
[   18.452265] input: Device Media Center Interface as /class/input/input2
[   18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device Media
Center Interface] on usb-0000:00:04.0-4
[   18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media Center
Interface] on usb-0000:00:04.0-4
[   18.483626] usbcore: registered new interface driver usbhid
[   18.483629] usbhid: v2.6:USB HID core driver
[   18.559424] device-mapper: uevent: version 1.0.3
[   18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@redhat.com
[   18.682017] PM: Starting manual resume from disk
[   18.753394] kjournald starting.  Commit interval 5 seconds
[   18.753394] EXT3-fs: mounted filesystem with ordered data mode.
[   19.766553] udevd version 125 started
[   20.072797] input: Power Button (FF) as /class/input/input3
[   20.165593] ACPI: Power Button (FF) [PWRF]
[   20.167337] input: Power Button (CM) as /class/input/input4
[   20.231290] ACPI: Power Button (CM) [PWRB]
[   20.233467] ACPI: WMI: Mapper loaded
[   20.381495] input: PC Speaker as /class/input/input5
[   20.398514] Error: Driver ''pcspkr'' is already registered,
aborting...
[   20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[   20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA] -> GSI
20 (level, low) -> IRQ 20
[   20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   22.555585] EXT3 FS on dm-0, internal journal
[   23.159449] loop: module loaded
[   23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1.  Priority:-1
extents:1 across:24023032k
xenhost:~#






From: vchampion@gmail.com
Date: Sun, 9 Jan 2011 10:13:30 +0300
Subject: Re: [Xen-users] (no subject)
To: sawozny@hotmail.com
CC: Xen-users@lists.xensource.com

Hi!


On which state the loading of xen kernel stops? What are you seeing on display
in that moment?
Can you put dmesg here?


2011/1/9 Scott A. Wozny <sawozny@hotmail.com>


OK, so after several weeks of trying to get various versions of Xen running of
various distributions, I''m starting to wonder if I''ve got a
hardware compatibility problem and as the system never really boots with the Xen
kernel I''ve got no log files to tell me where the problem is.  I was
wondering if there''s a way to compile from source with debug turned on,
particularly for early boot problems, and where those logs get stored.
 
In my research, it seems like everyone who has had problems getting Xen running
has fixed it through errors reported during the compile process and correcting
source files to match but I''ve been poring through the thousands of
lines of output produced by the various makes I''ve been doing in
different distro and source combinations and I can''t find anything that
says "You have a problem here".  They just compile cleanly and then
don''t boot.
 
Any and all suggestions would be greatly appreciated.
 
Thanks,
 
Scott

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

 		 	   		  

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Mark Adams

2011-Jan-09 23:18 UTC

head link

Re: [Xen-users] (no subject)

On 9 Jan 2011, at 21:11, "Scott A. Wozny" <sawozny@hotmail.com>
wrote:
> First of all, sorry about the lack of a subject on the email.  I''m
usually better about that stuff.
>  
> Anyway, the boot sequence goes by pretty fast, but here is the results of
booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built per
the instructions found at 
http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/
:
> 
Why are you compiling from source with debian? Just install the xen-linux-system
packages.

Regards,
Mark
> Grub Entry:
> root (hd0,0)
> kernel /xen-3.4.3.gz
> module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
> module /initrd.img-2.6.18.8-xen
> 
> Boot results:
> 
> Booting ''Xen 3.4.3 / Debian GNU/Linux, kernel
2.6.18.8-xen''
> 
> root (hd0,0)
>  Filesystem type is extfs2, partition type 0x83
> kernel /xen-3.4.3.gz
>    [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078,
entry=0x100000]
> module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
>    [Multiboot-module @0x298000, 0x7412d8 bytes]
> module /initrd.img-2.6.18.8-xen
>    [Multiboot-module @0x9d (this line displays to varying lengths each
time, but it goes by so fast I can''t get the rest of it before the
machine reboots)
> 
> 
> A different xen kernel also showed up in my grub that doesn''t
reboot, but also doesn''t boot properly.  Here are the results of that
if it helps:
> 
> Grub entry:
> root (hd0,0)
> kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> initrd /initrd.img-2.6.18.8-xen
> 
> Boot results:
> 
>    Booting ''Debian GNU/Linux, kernel 2.6.18.8-xen''
> 
> root (hd0,0)
>  Filesystem type is extfs2, partition type 0x83
> kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> 
> Error 13: Invalid or unsupported executable format
> 
> Press any key to continue...
>  
> Here are the dmesg file contents once I booted back into the original
kernel built as part of the Debian 5.0.7 install (if you can recommend any good
resources on interpreting dmesg output I''d appreciate it; in the
meantime I''ll start with Google; also, there was a TV card and modem in
the machine that an earlier version of the dmesg file was complaining about
compatibility; I don''t need either so I''ve pulled them out of
the machine and these are the results of the machine booting without them, but
do you think I should do a full reinstall now that they''re gone?):
>  
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Thu Nov 25 04:30:55 UTC 2010
> [    0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> [    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
> [    0.000000]  BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
> [    0.000000]  BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
> [    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> [    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
> [    0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
> [    0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200
used
> [    0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of
3200 used
> [    0.000000] max_pfn_mapped = 2293760
> [    0.000000] init_memory_mapping
> [    0.000000] DMI present.
> [    0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM)
> [    0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717 MSFT 
97)
> [    0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717 MSFT 
97)
> [    0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1  8A7G1 8A7G1-C0        4 INTL
20051117)
> [    0.000000] ACPI: FACS CFFAE000, 0040
> [    0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717 MSFT 
97)
> [    0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG  20090717 MSFT 
97)
> [    0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717 MSFT 
97)
> [    0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT  20090717 MSFT 
97)
> [    0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717 MSFT 
97)
> [    0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717 MSFT 
97)
> [    0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS  NVHDCP  20090717 MSFT 
97)
> [    0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717 MSFT 
97)
> [    0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm    CpuPm       12 INTL
20051117)
> [    0.000000] No NUMA configuration found
> [    0.000000] Faking a node at 0000000000000000-0000000230000000
> [    0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
> [    0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200
used
> [    0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of
3200 used
> [    0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
> [    0.000000]   NODE_DATA [0000000000012000 - 0000000000016fff]
> [    0.000000]   bootmap [0000000000017000 -  000000000005cfff] pages 46
> [    0.000000]   early res: 0 [0-fff] BIOS data page
> [    0.000000]   early res: 1 [6000-7fff] TRAMPOLINE
> [    0.000000]   early res: 2 [200000-675397] TEXT DATA BSS
> [    0.000000]   early res: 3 [378c2000-37fef99a] RAMDISK
> [    0.000000]   early res: 4 [9bc00-fffff] BIOS reserved
> [    0.000000]   early res: 5 [8000-11fff] PGTABLE
> [    0.000000]  [ffffe20000000000-ffffe20002dfffff] PMD ->
[ffff810001200000-ffff810003ffffff] on node 0
> [    0.000000]  [ffffe20003800000-ffffe20007bfffff] PMD ->
[ffff81000c000000-ffff8100103fffff] on node 0
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA             0 ->     4096
> [    0.000000]   DMA32        4096 ->  1048576
> [    0.000000]   Normal    1048576 ->  2293760
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[3] active PFN ranges
> [    0.000000]     0:        0 ->      155
> [    0.000000]     0:      256 ->   851872
> [    0.000000]     0:  1048576 ->  2293760
> [    0.000000] On node 0 totalpages: 2096955
> [    0.000000]   DMA zone: 56 pages used for memmap
> [    0.000000]   DMA zone: 1256 pages reserved
> [    0.000000]   DMA zone: 2683 pages, LIFO batch:0
> [    0.000000]   DMA32 zone: 14280 pages used for memmap
> [    0.000000]   DMA32 zone: 833496 pages, LIFO batch:31
> [    0.000000]   Normal zone: 17024 pages used for memmap
> [    0.000000]   Normal zone: 1228160 pages, LIFO batch:31
> [    0.000000]   Movable zone: 0 pages used for memmap
> [    0.000000] ACPI: PM-Timer IO Port: 0x4008
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI
0-23
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] ACPI: IRQ14 used by override.
> [    0.000000] ACPI: IRQ15 used by override.
> [    0.000000] Setting APIC routing to flat
> [    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] PM: Registered nosave memory: 000000000009b000 -
000000000009c000
> [    0.000000] PM: Registered nosave memory: 000000000009c000 -
00000000000a0000
> [    0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
> [    0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
> [    0.000000] PM: Registered nosave memory: 00000000cffa0000 -
00000000cffae000
> [    0.000000] PM: Registered nosave memory: 00000000cffae000 -
00000000cfff0000
> [    0.000000] PM: Registered nosave memory: 00000000cfff0000 -
00000000d0000000
> [    0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000fec00000
> [    0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
> [    0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fee00000
> [    0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
> [    0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000fff00000
> [    0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
> [    0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
> [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [    0.000000] PERCPU: Allocating 37168 bytes of per cpu data
> [    0.000000] NR_CPUS: 32, nr_cpu_ids: 4
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on. 
Total pages: 2064339
> [    0.000000] Policy zone: Normal
> [    0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro quiet
> [    0.000000] Initializing CPU#0
> [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [    0.000000] TSC calibrated against PM_TIMER
> [    0.000000] time.c: Detected 2333.293 MHz processor.
> [    0.004000] spurious 8259A interrupt: IRQ7.
> [    0.004000] Console: colour VGA+ 80x25
> [    0.004000] console [tty0] enabled
> [    0.004000] Checking aperture...
> [    0.004000] Calgary: detecting Calgary via BIOS EBDA area
> [    0.004000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
> [    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
> [    0.004000] Memory: 8192680k/9175040k available (2229k kernel code,
195140k reserved, 1084k data, 392k init)
> [    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> [    0.004000] hpet clockevent registered
> [    0.083840] Calibrating delay using timer specific routine.. 4671.46
BogoMIPS (lpj=9342927)
> [    0.083878] Security Framework initialized
> [    0.083884] SELinux:  Disabled at boot.
> [    0.083887] Capability LSM initialized
> [    0.084005] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
> [    0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> [    0.090266] Mount-cache hash table entries: 256
> [    0.090428] Initializing cgroup subsys ns
> [    0.090433] Initializing cgroup subsys cpuacct
> [    0.090436] Initializing cgroup subsys devices
> [    0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.090459] CPU: L2 cache: 2048K
> [    0.090461] CPU 0/0 -> Node 0
> [    0.090462] CPU: Physical Processor ID: 0
> [    0.090463] CPU: Processor Core ID: 0
> [    0.090471] CPU0: Thermal monitoring enabled (TM2)
> [    0.090472] using mwait in idle threads.
> [    0.091391] ACPI: Core revision 20080321
> [    0.142651] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz
stepping 07
> [    0.142654] Using local APIC timer interrupts.
> [    0.148009] APIC timer calibration result 20833012
> [    0.148009] Detected 20.833 MHz APIC timer.
> [    0.148009] Booting processor 1/1 ip 6000
> [    0.156009] Initializing CPU#1
> [    0.156009] Calibrating delay using timer specific routine.. 4666.64
BogoMIPS (lpj=9333287)
> [    0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.156009] CPU: L2 cache: 2048K
> [    0.156009] CPU 1/1 -> Node 0
> [    0.156009] CPU: Physical Processor ID: 0
> [    0.156009] CPU: Processor Core ID: 1
> [    0.156009] CPU1: Thermal monitoring enabled (TM2)
> [    0.236014] CPU1: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz
stepping 07
> [    0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [    0.240015] Booting processor 2/2 ip 6000
> [    0.248015] Initializing CPU#2
> [    0.248015] Calibrating delay using timer specific routine.. 4666.71
BogoMIPS (lpj=9333433)
> [    0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.248015] CPU: L2 cache: 2048K
> [    0.248015] CPU 2/2 -> Node 0
> [    0.248015] CPU: Physical Processor ID: 0
> [    0.248015] CPU: Processor Core ID: 2
> [    0.248015] CPU2: Thermal monitoring enabled (TM2)
> [    0.327750] CPU2: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz
stepping 07
> [    0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> [    0.332020] Booting processor 3/3 ip 6000
> [    0.340021] Initializing CPU#3
> [    0.340021] Calibrating delay using timer specific routine.. 4666.67
BogoMIPS (lpj=9333345)
> [    0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.340021] CPU: L2 cache: 2048K
> [    0.340021] CPU 3/3 -> Node 0
> [    0.340021] CPU: Physical Processor ID: 0
> [    0.340021] CPU: Processor Core ID: 3
> [    0.340021] CPU3: Thermal monitoring enabled (TM2)
> [    0.419670] CPU3: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz
stepping 07
> [    0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> [    0.424026] Brought up 4 CPUs
> [    0.424026] Total of 4 processors activated (18671.49 BogoMIPS).
> [    0.424026] CPU0 attaching sched-domain:
> [    0.424026]  domain 0: span 0-1
> [    0.424026]   groups: 0 1
> [    0.424026]   domain 1: span 0-3
> [    0.424026]    groups: 0-1 2-3
> [    0.424026]    domain 2: span 0-3
> [    0.424026]     groups: 0-3
> [    0.424026] CPU1 attaching sched-domain:
> [    0.424026]  domain 0: span 0-1
> [    0.424026]   groups: 1 0
> [    0.424026]   domain 1: span 0-3
> [    0.424026]    groups: 0-1 2-3
> [    0.424026]    domain 2: span 0-3
> [    0.424026]     groups: 0-3
> [    0.424026] CPU2 attaching sched-domain:
> [    0.424026]  domain 0: span 2-3
> [    0.424026]   groups: 2 3
> [    0.424026]   domain 1: span 0-3
> [    0.424026]    groups: 2-3 0-1
> [    0.424026]    domain 2: span 0-3
> [    0.424026]     groups: 0-3
> [    0.424026] CPU3 attaching sched-domain:
> [    0.424026]  domain 0: span 2-3
> [    0.424026]   groups: 3 2
> [    0.424026]   domain 1: span 0-3
> [    0.424026]    groups: 2-3 0-1
> [    0.424026]    domain 2: span 0-3
> [    0.424026]     groups: 0-3
> [    0.424026] net_namespace: 1224 bytes
> [    0.424026] Booting paravirtualized kernel on bare hardware
> [    0.424026] NET: Registered protocol family 16
> [    0.424026] ACPI: bus type pci registered
> [    0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
> [    0.424026] PCI: Not using MMCONFIG.
> [    0.424026] PCI: Using configuration type 1 for base access
> [    0.428602] ACPI: EC: Look up EC in DSDT
> [    0.447520] ACPI: Interpreter enabled
> [    0.447523] ACPI: (supports S0 S1 S3 S4 S5)
> [    0.447539] ACPI: Using IOAPIC for interrupt routing
> [    0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
> [    0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
> [    0.470851] PCI: Using MMCONFIG at e0000000 - efffffff
> [    0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [    0.500771] PCI: Transparent bridge - 0000:00:09.0
> [    0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
> [    0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
> [    0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> [    0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> [    0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> [    0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> [    0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
disabled.
> [    0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0,
disabled.
> [    0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
> [    0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
> [    0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7
> [    0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
> [    0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
> [    0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> [    0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
> [    0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
> [    0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0,
disabled.
> [    0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
> [    0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
> [    0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> [    0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
> [    0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
> [    0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
> [    0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
> [    0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0,
disabled.
> [    0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0,
disabled.
> [    0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
> [    0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
> [    0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
> [    0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
> [    0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay
> [    0.540903] pnp: PnP ACPI init
> [    0.540903] ACPI: bus type pnp registered
> [    0.540903] pnp 00:00: parse allocated resources
> [    0.540903] pnp 00:00:   add io  0xcf8-0xcff flags 0x1
> [    0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> [    0.540903] pnp 00:01: parse allocated resources
> [    0.540903] pnp 00:01:   add dma 4 flags 0x4
> [    0.540903] pnp 00:01:   add io  0x0-0xf flags 0x1
> [    0.540903] pnp 00:01:   add io  0x81-0x83 flags 0x1
> [    0.540903] pnp 00:01:   add io  0x87-0x87 flags 0x1
> [    0.540903] pnp 00:01:   add io  0x89-0x8b flags 0x1
> [    0.540903] pnp 00:01:   add io  0x8f-0x8f flags 0x1
> [    0.540903] pnp 00:01:   add io  0xc0-0xdf flags 0x1
> [    0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [    0.540926] pnp 00:02: parse allocated resources
> [    0.540930] pnp 00:02:   add io  0x61-0x61 flags 0x1
> [    0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
> [    0.544903] pnp 00:03: parse allocated resources
> [    0.544903] pnp 00:03:   add io  0xf0-0xff flags 0x1
> [    0.544903] pnp 00:03:   add irq 13 flags 0x1
> [    0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> [    0.544903] pnp 00:04: parse allocated resources
> [    0.544903] pnp 00:04:   add io  0x10-0x1f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x22-0x3f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x44-0x4d flags 0x1
> [    0.544903] pnp 00:04:   add io  0x50-0x5f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x62-0x63 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x65-0x6f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x72-0x7f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x80-0x80 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x84-0x86 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x88-0x88 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x8c-0x8e flags 0x1
> [    0.544903] pnp 00:04:   add io  0x90-0x9f flags 0x1
> [    0.544903] pnp 00:04:   add io  0xa2-0xbf flags 0x1
> [    0.544903] pnp 00:04:   add io  0xe0-0xef flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4d0-0x4d1 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x800-0x80f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4000-0x407f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4080-0x40ff flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4400-0x447f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4480-0x44ff flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4800-0x487f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4880-0x48ff flags 0x1
> [    0.544903] pnp 00:04:   add mem 0x0-0xffffffffffffffff flags 0x10000000
> [    0.544903] pnp 00:04:   add mem 0xfefe2000-0xfefe3fff flags 0x0
> [    0.544903] pnp 00:04:   add mem 0xfefe1000-0xfefe1fff flags 0x0
> [    0.544903] pnp 00:04:   add mem 0xfee01000-0xfeefffff flags 0x0
> [    0.544903] pnp 00:04: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.544903] pnp 00:05: parse allocated resources
> [    0.544903] pnp 00:05:   add mem 0xfed00000-0xfed00fff flags 0x1
> [    0.544903] pnp 00:05:   add irq 8 flags 0x1
> [    0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
> [    0.544903] pnp 00:06: parse allocated resources
> [    0.544903] pnp 00:06:   add io  0x70-0x71 flags 0x1
> [    0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> [    0.544903] pnp 00:07: parse allocated resources
> [    0.544903] pnp 00:07:   add mem 0xfec00000-0xfec00fff flags 0x0
> [    0.544903] pnp 00:07:   add mem 0xfee00000-0xfee00fff flags 0x0
> [    0.544903] pnp 00:07: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.544903] pnp 00:08: parse allocated resources
> [    0.544903] pnp 00:08:   add io  0x60-0x60 flags 0x1
> [    0.544903] pnp 00:08:   add io  0x64-0x64 flags 0x1
> [    0.544903] pnp 00:08:   add irq 1 flags 0x1
> [    0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
> [    0.548903] pnp 00:09: parse allocated resources
> [    0.548903] pnp 00:09:   add irq 12 flags 0x1
> [    0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
(active)
> [    0.548903] pnp 00:0a: parse allocated resources
> [    0.548903] pnp 00:0a:   add io  0x0-0xffffffffffffffff flags 0x10000001
> [    0.548903] pnp 00:0a:   add io  0xa00-0xa0f flags 0x1
> [    0.548903] pnp 00:0a:   add io  0xa10-0xa1f flags 0x1
> [    0.548903] pnp 00:0a:   add io  0xa20-0xa2f flags 0x1
> [    0.548903] pnp 00:0a:   add io  0xa30-0xa3f flags 0x1
> [    0.548903] pnp 00:0a: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.548903] pnp 00:0b: parse allocated resources
> [    0.548903] pnp 00:0b:   add mem 0xe0000000-0xefffffff flags 0x0
> [    0.548903] pnp 00:0b: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.548903] pnp 00:0c: parse allocated resources
> [    0.548903] pnp 00:0c:   add mem 0x0-0x9ffff flags 0x1
> [    0.548903] pnp 00:0c:   add mem 0xc0000-0xcffff flags 0x0
> [    0.548903] pnp 00:0c:   add mem 0xe0000-0xfffff flags 0x0
> [    0.548903] pnp 00:0c:   add mem 0x100000-0xcfffffff flags 0x1
> [    0.548903] pnp 00:0c:   add mem 0xfec00000-0xffffffff flags 0x0
> [    0.548903] pnp 00:0c: PNP0c01: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> [    0.554581] pnp: PnP ACPI: found 13 devices
> [    0.554581] ACPI: ACPI bus type pnp unregistered
> [    0.554581] usbcore: registered new interface driver usbfs
> [    0.554581] usbcore: registered new interface driver hub
> [    0.554581] usbcore: registered new device driver usb
> [    0.554581] PCI: Using ACPI for IRQ routing
> [    0.571245] PCI-GART: No AMD northbridge found.
> [    0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
> [    0.571257] hpet0: 4 64-bit timers, 25000000 Hz
> [    0.575216] ACPI: RTC can wake from S4
> [    0.578101] Switched to high resolution mode on CPU 0
> [    0.578546] Switched to high resolution mode on CPU 1
> [    0.578551] Switched to high resolution mode on CPU 3
> [    0.579207] Switched to high resolution mode on CPU 2
> [    0.590046] pnp: the driver ''system'' has been
registered
> [    0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
> [    0.590062] system 00:04: ioport range 0x800-0x80f has been reserved
> [    0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved
> [    0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved
> [    0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved
> [    0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved
> [    0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved
> [    0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved
> [    0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been
reserved
> [    0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been
reserved
> [    0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been
reserved
> [    0.590087] system 00:04: driver attached
> [    0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
> [    0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
> [    0.590099] system 00:07: driver attached
> [    0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved
> [    0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved
> [    0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved
> [    0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved
> [    0.590115] system 00:0a: driver attached
> [    0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
> [    0.590122] system 00:0b: driver attached
> [    0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
> [    0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
> [    0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
> [    0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
> [    0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not be
reserved
> [    0.590140] system 00:0c: driver attached
> [    0.593429] PCI: Bridge: 0000:00:09.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: disabled.
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Bridge: 0000:00:0c.0
> [    0.593429]   IO window: e000-efff
> [    0.593429]   MEM window: 0xfa000000-0xfeafffff
> [    0.593429]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
> [    0.593429] PCI: Bridge: 0000:00:15.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: disabled.
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Bridge: 0000:00:16.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: disabled.
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Bridge: 0000:00:17.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: 0xfeb00000-0xfebfffff
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Bridge: 0000:00:18.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: disabled.
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64
> [    0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
> [    0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0] ->
GSI 23 (level, low) -> IRQ 23
> [    0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> [    0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
> [    0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3] ->
GSI 22 (level, low) -> IRQ 22
> [    0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64
> [    0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
> [    0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4] ->
GSI 21 (level, low) -> IRQ 21
> [    0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64
> [    0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
> [    0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5] ->
GSI 20 (level, low) -> IRQ 20
> [    0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64
> [    0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
> [    0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6] ->
GSI 23 (level, low) -> IRQ 23
> [    0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64
> [    0.593430] NET: Registered protocol family 2
> [    0.642185] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
> [    0.644364] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
> [    0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [    0.649453] TCP: Hash tables configured (established 524288 bind 65536)
> [    0.649456] TCP reno registered
> [    0.658058] NET: Registered protocol family 1
> [    0.658160] checking if image is initramfs... it is
> [    1.186404] Freeing initrd memory: 7350k freed
> [    1.191507] audit: initializing netlink socket (disabled)
> [    1.191507] type=2000 audit(1294606162.172:1): initialized
> [    1.201065] Total HugeTLB memory allocated, 0
> [    1.201065] VFS: Disk quotas dquot_6.5.1
> [    1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    1.201065] msgmni has been set to 16015
> [    1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
> [    1.201065] io scheduler noop registered
> [    1.201065] io scheduler anticipatory registered
> [    1.201065] io scheduler deadline registered
> [    1.201065] io scheduler cfq registered (default)
> [    1.272051] pci 0000:02:00.0: Boot video device
> [    1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> [    1.272968] assign_interrupt_mode Found MSI capability
> [    1.272968] Allocate Port Service[0000:00:0c.0:pcie00]
> [    1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64
> [    1.272968] assign_interrupt_mode Found MSI capability
> [    1.272968] Allocate Port Service[0000:00:15.0:pcie00]
> [    1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64
> [    1.272968] assign_interrupt_mode Found MSI capability
> [    1.272968] Allocate Port Service[0000:00:16.0:pcie00]
> [    1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64
> [    1.272968] assign_interrupt_mode Found MSI capability
> [    1.272968] Allocate Port Service[0000:00:17.0:pcie00]
> [    1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64
> [    1.273122] assign_interrupt_mode Found MSI capability
> [    1.273122] Allocate Port Service[0000:00:18.0:pcie00]
> [    1.278234] hpet_resources: 0xfed00000 is busy
> [    1.278234] Linux agpgart interface v0.103
> [    1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
> [    1.278234] pnp: the driver ''serial'' has been
registered
> [    1.282230] brd: module loaded
> [    1.282230] input: Macintosh mouse button emulation as
/class/input/input0
> [    1.282230] pnp: the driver ''i8042 kbd'' has been
registered
> [    1.282230] i8042 kbd 00:08: driver attached
> [    1.282230] pnp: the driver ''i8042 aux'' has been
registered
> [    1.282230] i8042 aux 00:09: driver attached
> [    1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
> [    1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    1.302218] mice: PS/2 mouse device common for all mice
> [    1.302218] pnp: the driver ''rtc_cmos'' has been
registered
> [    1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [    1.302218] rtc0: alarms up to one year, y3k
> [    1.302218] rtc_cmos 00:06: driver attached
> [    1.302218] cpuidle: using governor ladder
> [    1.302218] cpuidle: using governor menu
> [    1.302218] No iBFT detected.
> [    1.302563] TCP cubic registered
> [    1.302563] NET: Registered protocol family 17
> [    1.302563] registered taskstats version 1
> [    1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09 20:49:22
UTC (1294606162)
> [    1.302563] Freeing unused kernel memory: 392k freed
> [    1.326091] input: AT Translated Set 2 keyboard as /class/input/input1
> [    1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm  P001Ist       11 INTL
20051117)
> [    1.379078] ACPI: ACPI0007:00 is registered as cooling_device0
> [    1.379078] ACPI: Processor [P001] (supports 8 throttling states)
> [    1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm  P002Ist       12 INTL
20051117)
> [    1.379078] ACPI: ACPI0007:01 is registered as cooling_device1
> [    1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm  P003Ist       12 INTL
20051117)
> [    1.379078] ACPI: ACPI0007:02 is registered as cooling_device2
> [    1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm  P004Ist       12 INTL
20051117)
> [    1.383072] ACPI: ACPI0007:03 is registered as cooling_device3
> [    1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0
> [    1.383072] ACPI: Thermal Zone [THRM] (33 C)
> [    1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
> [    1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2] ->
GSI 22 (level, low) -> IRQ 22
> [    1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64
> [    1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller
> [    1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 1
> [    1.556086] ehci_hcd 0000:00:04.1: debug port 1
> [    1.556086] PCI: cache line size of 32 is not supported by device
0000:00:04.1
> [    1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00
> [    1.556731] ohci_hcd: 2006 August 04 USB 1.1 ''Open''
Host Controller (OHCI) Driver
> [    1.560731] No dock devices found.
> [    1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
> [    1.564968] usb usb1: configuration #1 chosen from 1 choice
> [    1.564995] hub 1-0:1.0: USB hub found
> [    1.565003] hub 1-0:1.0: 6 ports detected
> [    1.568731] SCSI subsystem initialized
> [    1.580731] libata version 3.00 loaded.
> [    1.673459] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
> [    1.673459] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [    1.673459] usb usb1: Product: EHCI Host Controller
> [    1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> [    1.673459] usb usb1: SerialNumber: 0000:00:04.1
> [    1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
> [    1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12] ->
GSI 21 (level, low) -> IRQ 21
> [    1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64
> [    1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller
> [    1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus
number 2
> [    1.673459] ehci_hcd 0000:00:06.1: debug port 1
> [    1.673459] PCI: cache line size of 32 is not supported by device
0000:00:06.1
> [    1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800
> [    1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
> [    1.689512] usb usb2: configuration #1 chosen from 1 choice
> [    1.689537] hub 2-0:1.0: USB hub found
> [    1.689543] hub 2-0:1.0: 6 ports detected
> [    1.792316] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
> [    1.792319] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [    1.792321] usb usb2: Product: EHCI Host Controller
> [    1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> [    1.792324] usb usb2: SerialNumber: 0000:00:06.1
> [    1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
> [    1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0] ->
GSI 20 (level, low) -> IRQ 20
> [    1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64
> [    1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller
> [    1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 3
> [    1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000
> [    1.855515] usb usb3: configuration #1 chosen from 1 choice
> [    1.855538] hub 3-0:1.0: USB hub found
> [    1.855544] hub 3-0:1.0: 6 ports detected
> [    1.957533] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
> [    1.957536] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [    1.957538] usb usb3: Product: OHCI Host Controller
> [    1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> [    1.957541] usb usb3: SerialNumber: 0000:00:04.0
> [    1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
> [    1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11] ->
GSI 23 (level, low) -> IRQ 23
> [    1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64
> [    1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller
> [    1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus
number 4
> [    1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000
> [    2.015521] usb usb4: configuration #1 chosen from 1 choice
> [    2.015543] hub 4-0:1.0: USB hub found
> [    2.015549] hub 4-0:1.0: 6 ports detected
> [    2.105477] usb 2-3: new high speed USB device using ehci_hcd and
address 2
> [    2.117542] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
> [    2.117545] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [    2.117547] usb usb4: Product: OHCI Host Controller
> [    2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> [    2.117550] usb usb4: SerialNumber: 0000:00:06.0
> [    2.121473] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
> [    2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
> [    2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] ->
GSI 22 (level, low) -> IRQ 22
> [    2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> [    2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83 has
an invalid bInterval 30, changing to 8
> [    2.275186] usb 2-3: configuration #1 chosen from 1 choice
> [    2.278384] usb 2-3: New USB device found, idVendor=0bda, idProduct=0152
> [    2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> [    2.278384] usb 2-3: Product: USB2.0-CRW
> [    2.278384] usb 2-3: Manufacturer: Generic
> [    2.278384] usb 2-3: SerialNumber: 20060413092100000
> [    2.300419] Initializing USB Mass Storage driver...
> [    2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr
00:22:68:3a:6a:b7
> [    2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit
lnktim msi desc-v3
> [    2.801910] ahci 0000:00:0b.0: version 3.0
> [    2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
> [    2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0] ->
GSI 21 (level, low) -> IRQ 21
> [    2.950553] usb 3-4: new low speed USB device using ohci_hcd and address
2
> [    3.169044] usb 3-4: configuration #1 chosen from 1 choice
> [    3.169044] usb 3-4: New USB device found, idVendor=04eb, idProduct=e030
> [    3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> [    3.169044] usb 3-4: Product: Media Center Interface
> [    3.169044] usb 3-4: Manufacturer: Device
> [    3.517035] usb 4-4: new low speed USB device using ohci_hcd and address
2
> [    3.905098] usb 4-4: configuration #1 chosen from 1 choice
> [    3.922229] usb 4-4: New USB device found, idVendor=04eb, idProduct=e033
> [    3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> [    3.922233] usb 4-4: Product: eHome Infrared Transceiver
> [    3.922235] usb 4-4: Manufacturer: Northstar System Corp.
> [    3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000
> [    3.922229] usbcore: registered new interface driver hiddev
> [    3.925096] scsi0 : SCSI emulation for USB Mass Storage devices
> [    3.925096] usb-storage: device found at 2
> [    3.925096] usb-storage: waiting for device to settle before scanning
> [    4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl RAID mode
> [    4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum
part
> [    4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64
> [    4.090205] scsi1 : ahci
> [    4.090703] scsi2 : ahci
> [    4.090703] scsi3 : ahci
> [    4.090703] scsi4 : ahci
> [    4.090703] scsi5 : ahci
> [    4.090703] scsi6 : ahci
> [    4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72100 irq 1274
> [    4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72180 irq 1274
> [    4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72200 irq 1274
> [    4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72280 irq 1274
> [    4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72300 irq 1274
> [    4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72380 irq 1274
> [    4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max
UDMA/133
> [    4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth
31/32)
> [    4.659284] ata1.00: configured for UDMA/133
> [    5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
> [    5.142984] ata2.00: configured for UDMA/100
> [    5.467117] ata3: SATA link down (SStatus 0 SControl 300)
> [    6.082425] ata4: SATA link down (SStatus 0 SControl 300)
> [    6.405773] ata5: SATA link down (SStatus 0 SControl 300)
> [    6.725774] ata6: SATA link down (SStatus 0 SControl 300)
> [    7.115290] scsi 1:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2
01.0 PQ: 0 ANSI: 5
> [    7.115290] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH15F    
EG00 PQ: 0 ANSI: 5
> [    7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19
> [    7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A] ->
GSI 19 (level, low) -> IRQ 19
> [    7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64
> [    7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] 
MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
> [    7.467156] Driver ''sd'' needs updating - please use
bus_type methods
> [    7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> [    7.467156] sd 1:0:0:0: [sda] Write Protect is off
> [    7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
> [    7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> [    7.467156] sd 1:0:0:0: [sda] Write Protect is off
> [    7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
> [    7.467156]  sda:<4>Driver ''sr'' needs updating -
please use bus_type methods
> [    7.484514]  sda1 sda2
> [    7.484644] sd 1:0:0:0: [sda] Attached SCSI disk
> [    7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2
cdda tray
> [    7.712076] Uniform CD-ROM driver Revision: 3.20
> [    7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0
> [    7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0
> [    7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5
> [    9.251645] ieee1394: Host added: ID:BUS[0-00:1023] 
GUID[00995efa00016c20]
> [   11.721065] usb-storage: device scan complete
> [   11.721065] scsi 0:0:0:0: Direct-Access     Generic- Compact Flash   
1.00 PQ: 0 ANSI: 0 CCS
> [   12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk
> [   12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0
> [   17.887389] usbhid: timeout initializing reports
> [   17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW]
on usb-0000:00:06.1-3
> [   17.887477] usbcore: registered new interface driver usb-storage
> [   17.887480] USB Mass Storage support registered.
> [   18.452265] input: Device Media Center Interface as /class/input/input2
> [   18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device Media
Center Interface] on usb-0000:00:04.0-4
> [   18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media Center
Interface] on usb-0000:00:04.0-4
> [   18.483626] usbcore: registered new interface driver usbhid
> [   18.483629] usbhid: v2.6:USB HID core driver
> [   18.559424] device-mapper: uevent: version 1.0.3
> [   18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@redhat.com
> [   18.682017] PM: Starting manual resume from disk
> [   18.753394] kjournald starting.  Commit interval 5 seconds
> [   18.753394] EXT3-fs: mounted filesystem with ordered data mode.
> [   19.766553] udevd version 125 started
> [   20.072797] input: Power Button (FF) as /class/input/input3
> [   20.165593] ACPI: Power Button (FF) [PWRF]
> [   20.167337] input: Power Button (CM) as /class/input/input4
> [   20.231290] ACPI: Power Button (CM) [PWRB]
> [   20.233467] ACPI: WMI: Mapper loaded
> [   20.381495] input: PC Speaker as /class/input/input5
> [   20.398514] Error: Driver ''pcspkr'' is already
registered, aborting...
> [   20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
> [   20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA] ->
GSI 20 (level, low) -> IRQ 20
> [   20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64
> [   22.555585] EXT3 FS on dm-0, internal journal
> [   23.159449] loop: module loaded
> [   23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1. 
Priority:-1 extents:1 across:24023032k
> xenhost:~#
> 
> 
> From: vchampion@gmail.com
> Date: Sun, 9 Jan 2011 10:13:30 +0300
> Subject: Re: [Xen-users] (no subject)
> To: sawozny@hotmail.com
> CC: Xen-users@lists.xensource.com
> 
> Hi!
> 
> On which state the loading of xen kernel stops? What are you seeing on
display in that moment?
> Can you put dmesg here?
> 
> 2011/1/9 Scott A. Wozny <sawozny@hotmail.com>
> OK, so after several weeks of trying to get various versions of Xen running
of various distributions, I''m starting to wonder if I''ve got a
hardware compatibility problem and as the system never really boots with the Xen
kernel I''ve got no log files to tell me where the problem is.  I was
wondering if there''s a way to compile from source with debug turned on,
particularly for early boot problems, and where those logs get stored.
>  
> In my research, it seems like everyone who has had problems getting Xen
running has fixed it through errors reported during the compile process and
correcting source files to match but I''ve been poring through the
thousands of lines of output produced by the various makes I''ve been
doing in different distro and source combinations and I can''t find
anything that says "You have a problem here".  They just compile
cleanly and then don''t boot.
>  
> Any and all suggestions would be greatly appreciated.
>  
> Thanks,
>  
> Scott
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Scott A. Wozny

2011-Jan-09 23:37 UTC

head link

RE: [Xen-users] (no subject)

Hi Mark,
 
2 main reasons.  The secondary reason is that I''ve had poor luck with
pre-compiled Xen packages (I haven''t tried it on this distro, but I
wasn''t even able to get the live CD to work), but the primary reason is
that I need to use Xen 4 (need to be able to do guest disk resize without
shutting the guest down) and I prefer to do it on Ubuntu for which there is no
Xen 4 package.  The reason I''m here asking about Xen 3 is because I was
getting so frustrated trying to get Xen 4 to compile that I thought perhaps it
was too new and a more mature code base like Xen 3 might compile and install
properly for me.  Once I got that to work I was going to take what I had learned
and go back to my original Xen 4 plan, hopefully with knowledge that would help
me get that to work.  However, now that I realize I can''t get Xen 3 to
compile and work properly on this box either, I''ve been thinking I have
a hardware compatibility problem which is why I posted to this forum asking for
any tips and tricks people could share on tracking down whether there really was
a hardware compatibility problem here and from there how to fix it.  Primarily
this is a learning exercise for me so I can eventually get back to my original
goal.
 
If you have any suggestions on how to get there, I''m definitely
interested in hearing your thoughts.
 
Thanks,
 
Scott
 


CC: vchampion@gmail.com; xen-users@lists.xensource.com
From: mark@campbell-lange.net
Subject: Re: [Xen-users] (no subject)
Date: Sun, 9 Jan 2011 23:18:18 +0000
To: sawozny@hotmail.com





On 9 Jan 2011, at 21:11, "Scott A. Wozny" <sawozny@hotmail.com>
wrote:




First of all, sorry about the lack of a subject on the email.  I''m
usually better about that stuff.
 
Anyway, the boot sequence goes by pretty fast, but here is the results of
booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built per
the instructions found at 
http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/
:




Why are you compiling from source with debian? Just install the xen-linux-system
packages.

Regards,
Mark



Grub Entry:
root (hd0,0)
kernel /xen-3.4.3.gz
module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
module /initrd.img-2.6.18.8-xen


Boot results:


Booting ''Xen 3.4.3 / Debian GNU/Linux, kernel 2.6.18.8-xen''


root (hd0,0)
 Filesystem type is extfs2, partition type 0x83
kernel /xen-3.4.3.gz
   [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078,
entry=0x100000]

module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
   [Multiboot-module @0x298000, 0x7412d8 bytes]
module /initrd.img-2.6.18.8-xen
   [Multiboot-module @0x9d (this line displays to varying lengths each time, but
it goes by so fast I can''t get the rest of it before the machine
reboots)




A different xen kernel also showed up in my grub that doesn''t reboot,
but also doesn''t boot properly.  Here are the results of that if it
helps:


Grub entry:
root (hd0,0)
kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
initrd /initrd.img-2.6.18.8-xen


Boot results:


   Booting ''Debian GNU/Linux, kernel 2.6.18.8-xen''


root (hd0,0)
 Filesystem type is extfs2, partition type 0x83
kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet


Error 13: Invalid or unsupported executable format


Press any key to continue...
 
Here are the dmesg file contents once I booted back into the original kernel
built as part of the Debian 5.0.7 install (if you can recommend any good
resources on interpreting dmesg output I''d appreciate it; in the
meantime I''ll start with Google; also, there was a TV card and modem in
the machine that an earlier version of the dmesg file was complaining about
compatibility; I don''t need either so I''ve pulled them out of
the machine and these are the results of the machine booting without them, but
do you think I should do a full reinstall now that they''re gone?):
 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Thu Nov 25 04:30:55 UTC 2010
[    0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200
used
[    0.000000] max_pfn_mapped = 2293760
[    0.000000] init_memory_mapping
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717 MSFT      
97)
[    0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717 MSFT      
97)
[    0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1  8A7G1 8A7G1-C0        4 INTL
20051117)
[    0.000000] ACPI: FACS CFFAE000, 0040
[    0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717 MSFT      
97)
[    0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG  20090717 MSFT      
97)
[    0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717 MSFT      
97)
[    0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT  20090717 MSFT      
97)
[    0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717 MSFT      
97)
[    0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717 MSFT      
97)
[    0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS  NVHDCP  20090717 MSFT      
97)
[    0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717 MSFT      
97)
[    0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm    CpuPm       12 INTL
20051117)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000230000000
[    0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200 used
[    0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200
used
[    0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[    0.000000]   NODE_DATA [0000000000012000 - 0000000000016fff]
[    0.000000]   bootmap [0000000000017000 -  000000000005cfff] pages 46
[    0.000000]   early res: 0 [0-fff] BIOS data page
[    0.000000]   early res: 1 [6000-7fff] TRAMPOLINE
[    0.000000]   early res: 2 [200000-675397] TEXT DATA BSS
[    0.000000]   early res: 3 [378c2000-37fef99a] RAMDISK
[    0.000000]   early res: 4 [9bc00-fffff] BIOS reserved
[    0.000000]   early res: 5 [8000-11fff] PGTABLE
[    0.000000]  [ffffe20000000000-ffffe20002dfffff] PMD ->
[ffff810001200000-ffff810003ffffff] on node 0
[    0.000000]  [ffffe20003800000-ffffe20007bfffff] PMD ->
[ffff81000c000000-ffff8100103fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  2293760
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      155
[    0.000000]     0:      256 ->   851872
[    0.000000]     0:  1048576 ->  2293760
[    0.000000] On node 0 totalpages: 2096955
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1256 pages reserved
[    0.000000]   DMA zone: 2683 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833496 pages, LIFO batch:31
[    0.000000]   Normal zone: 17024 pages used for memmap
[    0.000000]   Normal zone: 1228160 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffa0000 - 00000000cffae000
[    0.000000] PM: Registered nosave memory: 00000000cffae000 - 00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[    0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 2064339
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro quiet
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] time.c: Detected 2333.293 MHz processor.
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] Calgary: detecting Calgary via BIOS EBDA area
[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
[    0.004000] Memory: 8192680k/9175040k available (2229k kernel code, 195140k
reserved, 1084k data, 392k init)
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] hpet clockevent registered
[    0.083840] Calibrating delay using timer specific routine.. 4671.46 BogoMIPS
(lpj=9342927)
[    0.083878] Security Framework initialized
[    0.083884] SELinux:  Disabled at boot.
[    0.083887] Capability LSM initialized
[    0.084005] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[    0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.090266] Mount-cache hash table entries: 256
[    0.090428] Initializing cgroup subsys ns
[    0.090433] Initializing cgroup subsys cpuacct
[    0.090436] Initializing cgroup subsys devices
[    0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.090459] CPU: L2 cache: 2048K
[    0.090461] CPU 0/0 -> Node 0
[    0.090462] CPU: Physical Processor ID: 0
[    0.090463] CPU: Processor Core ID: 0
[    0.090471] CPU0: Thermal monitoring enabled (TM2)
[    0.090472] using mwait in idle threads.
[    0.091391] ACPI: Core revision 20080321
[    0.142651] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.142654] Using local APIC timer interrupts.
[    0.148009] APIC timer calibration result 20833012
[    0.148009] Detected 20.833 MHz APIC timer.
[    0.148009] Booting processor 1/1 ip 6000
[    0.156009] Initializing CPU#1
[    0.156009] Calibrating delay using timer specific routine.. 4666.64 BogoMIPS
(lpj=9333287)
[    0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.156009] CPU: L2 cache: 2048K
[    0.156009] CPU 1/1 -> Node 0
[    0.156009] CPU: Physical Processor ID: 0
[    0.156009] CPU: Processor Core ID: 1
[    0.156009] CPU1: Thermal monitoring enabled (TM2)
[    0.236014] CPU1: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.240015] Booting processor 2/2 ip 6000
[    0.248015] Initializing CPU#2
[    0.248015] Calibrating delay using timer specific routine.. 4666.71 BogoMIPS
(lpj=9333433)
[    0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.248015] CPU: L2 cache: 2048K
[    0.248015] CPU 2/2 -> Node 0
[    0.248015] CPU: Physical Processor ID: 0
[    0.248015] CPU: Processor Core ID: 2
[    0.248015] CPU2: Thermal monitoring enabled (TM2)
[    0.327750] CPU2: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.332020] Booting processor 3/3 ip 6000
[    0.340021] Initializing CPU#3
[    0.340021] Calibrating delay using timer specific routine.. 4666.67 BogoMIPS
(lpj=9333345)
[    0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.340021] CPU: L2 cache: 2048K
[    0.340021] CPU 3/3 -> Node 0
[    0.340021] CPU: Physical Processor ID: 0
[    0.340021] CPU: Processor Core ID: 3
[    0.340021] CPU3: Thermal monitoring enabled (TM2)
[    0.419670] CPU3: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz stepping 07
[    0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.424026] Brought up 4 CPUs
[    0.424026] Total of 4 processors activated (18671.49 BogoMIPS).
[    0.424026] CPU0 attaching sched-domain:
[    0.424026]  domain 0: span 0-1
[    0.424026]   groups: 0 1
[    0.424026]   domain 1: span 0-3
[    0.424026]    groups: 0-1 2-3
[    0.424026]    domain 2: span 0-3
[    0.424026]     groups: 0-3
[    0.424026] CPU1 attaching sched-domain:
[    0.424026]  domain 0: span 0-1
[    0.424026]   groups: 1 0
[    0.424026]   domain 1: span 0-3
[    0.424026]    groups: 0-1 2-3
[    0.424026]    domain 2: span 0-3
[    0.424026]     groups: 0-3
[    0.424026] CPU2 attaching sched-domain:
[    0.424026]  domain 0: span 2-3
[    0.424026]   groups: 2 3
[    0.424026]   domain 1: span 0-3
[    0.424026]    groups: 2-3 0-1
[    0.424026]    domain 2: span 0-3
[    0.424026]     groups: 0-3
[    0.424026] CPU3 attaching sched-domain:
[    0.424026]  domain 0: span 2-3
[    0.424026]   groups: 3 2
[    0.424026]   domain 1: span 0-3
[    0.424026]    groups: 2-3 0-1
[    0.424026]    domain 2: span 0-3
[    0.424026]     groups: 0-3
[    0.424026] net_namespace: 1224 bytes
[    0.424026] Booting paravirtualized kernel on bare hardware
[    0.424026] NET: Registered protocol family 16
[    0.424026] ACPI: bus type pci registered
[    0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.424026] PCI: Not using MMCONFIG.
[    0.424026] PCI: Using configuration type 1 for base access
[    0.428602] ACPI: EC: Look up EC in DSDT
[    0.447520] ACPI: Interpreter enabled
[    0.447523] ACPI: (supports S0 S1 S3 S4 S5)
[    0.447539] ACPI: Using IOAPIC for interrupt routing
[    0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.470851] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.500771] PCI: Transparent bridge - 0000:00:09.0
[    0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
[    0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[    0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7
[    0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[    0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[    0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[    0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
[    0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
[    0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[    0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[    0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
[    0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[    0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[    0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[    0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[    0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
[    0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[    0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[    0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[    0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
[    0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
[    0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.540903] pnp: PnP ACPI init
[    0.540903] ACPI: bus type pnp registered
[    0.540903] pnp 00:00: parse allocated resources
[    0.540903] pnp 00:00:   add io  0xcf8-0xcff flags 0x1
[    0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.540903] pnp 00:01: parse allocated resources
[    0.540903] pnp 00:01:   add dma 4 flags 0x4
[    0.540903] pnp 00:01:   add io  0x0-0xf flags 0x1
[    0.540903] pnp 00:01:   add io  0x81-0x83 flags 0x1
[    0.540903] pnp 00:01:   add io  0x87-0x87 flags 0x1
[    0.540903] pnp 00:01:   add io  0x89-0x8b flags 0x1
[    0.540903] pnp 00:01:   add io  0x8f-0x8f flags 0x1
[    0.540903] pnp 00:01:   add io  0xc0-0xdf flags 0x1
[    0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.540926] pnp 00:02: parse allocated resources
[    0.540930] pnp 00:02:   add io  0x61-0x61 flags 0x1
[    0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.544903] pnp 00:03: parse allocated resources
[    0.544903] pnp 00:03:   add io  0xf0-0xff flags 0x1
[    0.544903] pnp 00:03:   add irq 13 flags 0x1
[    0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.544903] pnp 00:04: parse allocated resources
[    0.544903] pnp 00:04:   add io  0x10-0x1f flags 0x1
[    0.544903] pnp 00:04:   add io  0x22-0x3f flags 0x1
[    0.544903] pnp 00:04:   add io  0x44-0x4d flags 0x1
[    0.544903] pnp 00:04:   add io  0x50-0x5f flags 0x1
[    0.544903] pnp 00:04:   add io  0x62-0x63 flags 0x1
[    0.544903] pnp 00:04:   add io  0x65-0x6f flags 0x1
[    0.544903] pnp 00:04:   add io  0x72-0x7f flags 0x1
[    0.544903] pnp 00:04:   add io  0x80-0x80 flags 0x1
[    0.544903] pnp 00:04:   add io  0x84-0x86 flags 0x1
[    0.544903] pnp 00:04:   add io  0x88-0x88 flags 0x1
[    0.544903] pnp 00:04:   add io  0x8c-0x8e flags 0x1
[    0.544903] pnp 00:04:   add io  0x90-0x9f flags 0x1
[    0.544903] pnp 00:04:   add io  0xa2-0xbf flags 0x1
[    0.544903] pnp 00:04:   add io  0xe0-0xef flags 0x1
[    0.544903] pnp 00:04:   add io  0x4d0-0x4d1 flags 0x1
[    0.544903] pnp 00:04:   add io  0x800-0x80f flags 0x1
[    0.544903] pnp 00:04:   add io  0x4000-0x407f flags 0x1
[    0.544903] pnp 00:04:   add io  0x4080-0x40ff flags 0x1
[    0.544903] pnp 00:04:   add io  0x4400-0x447f flags 0x1
[    0.544903] pnp 00:04:   add io  0x4480-0x44ff flags 0x1
[    0.544903] pnp 00:04:   add io  0x4800-0x487f flags 0x1
[    0.544903] pnp 00:04:   add io  0x4880-0x48ff flags 0x1
[    0.544903] pnp 00:04:   add mem 0x0-0xffffffffffffffff flags 0x10000000
[    0.544903] pnp 00:04:   add mem 0xfefe2000-0xfefe3fff flags 0x0
[    0.544903] pnp 00:04:   add mem 0xfefe1000-0xfefe1fff flags 0x0
[    0.544903] pnp 00:04:   add mem 0xfee01000-0xfeefffff flags 0x0
[    0.544903] pnp 00:04: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.544903] pnp 00:05: parse allocated resources
[    0.544903] pnp 00:05:   add mem 0xfed00000-0xfed00fff flags 0x1
[    0.544903] pnp 00:05:   add irq 8 flags 0x1
[    0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.544903] pnp 00:06: parse allocated resources
[    0.544903] pnp 00:06:   add io  0x70-0x71 flags 0x1
[    0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.544903] pnp 00:07: parse allocated resources
[    0.544903] pnp 00:07:   add mem 0xfec00000-0xfec00fff flags 0x0
[    0.544903] pnp 00:07:   add mem 0xfee00000-0xfee00fff flags 0x0
[    0.544903] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.544903] pnp 00:08: parse allocated resources
[    0.544903] pnp 00:08:   add io  0x60-0x60 flags 0x1
[    0.544903] pnp 00:08:   add io  0x64-0x64 flags 0x1
[    0.544903] pnp 00:08:   add irq 1 flags 0x1
[    0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[    0.548903] pnp 00:09: parse allocated resources
[    0.548903] pnp 00:09:   add irq 12 flags 0x1
[    0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
(active)
[    0.548903] pnp 00:0a: parse allocated resources
[    0.548903] pnp 00:0a:   add io  0x0-0xffffffffffffffff flags 0x10000001
[    0.548903] pnp 00:0a:   add io  0xa00-0xa0f flags 0x1
[    0.548903] pnp 00:0a:   add io  0xa10-0xa1f flags 0x1
[    0.548903] pnp 00:0a:   add io  0xa20-0xa2f flags 0x1
[    0.548903] pnp 00:0a:   add io  0xa30-0xa3f flags 0x1
[    0.548903] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.548903] pnp 00:0b: parse allocated resources
[    0.548903] pnp 00:0b:   add mem 0xe0000000-0xefffffff flags 0x0
[    0.548903] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[    0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.548903] pnp 00:0c: parse allocated resources
[    0.548903] pnp 00:0c:   add mem 0x0-0x9ffff flags 0x1
[    0.548903] pnp 00:0c:   add mem 0xc0000-0xcffff flags 0x0
[    0.548903] pnp 00:0c:   add mem 0xe0000-0xfffff flags 0x0
[    0.548903] pnp 00:0c:   add mem 0x100000-0xcfffffff flags 0x1
[    0.548903] pnp 00:0c:   add mem 0xfec00000-0xffffffff flags 0x0
[    0.548903] pnp 00:0c: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[    0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.554581] pnp: PnP ACPI: found 13 devices
[    0.554581] ACPI: ACPI bus type pnp unregistered
[    0.554581] usbcore: registered new interface driver usbfs
[    0.554581] usbcore: registered new interface driver hub
[    0.554581] usbcore: registered new device driver usb
[    0.554581] PCI: Using ACPI for IRQ routing
[    0.571245] PCI-GART: No AMD northbridge found.
[    0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.571257] hpet0: 4 64-bit timers, 25000000 Hz
[    0.575216] ACPI: RTC can wake from S4
[    0.578101] Switched to high resolution mode on CPU 0
[    0.578546] Switched to high resolution mode on CPU 1
[    0.578551] Switched to high resolution mode on CPU 3
[    0.579207] Switched to high resolution mode on CPU 2
[    0.590046] pnp: the driver ''system'' has been registered
[    0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.590062] system 00:04: ioport range 0x800-0x80f has been reserved
[    0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved
[    0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved
[    0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved
[    0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved
[    0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved
[    0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved
[    0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved
[    0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved
[    0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.590087] system 00:04: driver attached
[    0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
[    0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
[    0.590099] system 00:07: driver attached
[    0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[    0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[    0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[    0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[    0.590115] system 00:0a: driver attached
[    0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.590122] system 00:0b: driver attached
[    0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
[    0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not be
reserved
[    0.590140] system 00:0c: driver attached
[    0.593429] PCI: Bridge: 0000:00:09.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: disabled.
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Bridge: 0000:00:0c.0
[    0.593429]   IO window: e000-efff
[    0.593429]   MEM window: 0xfa000000-0xfeafffff
[    0.593429]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[    0.593429] PCI: Bridge: 0000:00:15.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: disabled.
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Bridge: 0000:00:16.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: disabled.
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Bridge: 0000:00:17.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: 0xfeb00000-0xfebfffff
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Bridge: 0000:00:18.0
[    0.593429]   IO window: disabled.
[    0.593429]   MEM window: disabled.
[    0.593429]   PREFETCH window: disabled.
[    0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64
[    0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[    0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0] -> GSI
23 (level, low) -> IRQ 23
[    0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[    0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3] -> GSI
22 (level, low) -> IRQ 22
[    0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64
[    0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[    0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4] -> GSI
21 (level, low) -> IRQ 21
[    0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64
[    0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
[    0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5] -> GSI
20 (level, low) -> IRQ 20
[    0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64
[    0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
[    0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6] -> GSI
23 (level, low) -> IRQ 23
[    0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64
[    0.593430] NET: Registered protocol family 2
[    0.642185] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[    0.644364] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[    0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.649453] TCP: Hash tables configured (established 524288 bind 65536)
[    0.649456] TCP reno registered
[    0.658058] NET: Registered protocol family 1
[    0.658160] checking if image is initramfs... it is
[    1.186404] Freeing initrd memory: 7350k freed
[    1.191507] audit: initializing netlink socket (disabled)
[    1.191507] type=2000 audit(1294606162.172:1): initialized
[    1.201065] Total HugeTLB memory allocated, 0
[    1.201065] VFS: Disk quotas dquot_6.5.1
[    1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.201065] msgmni has been set to 16015
[    1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[    1.201065] io scheduler noop registered
[    1.201065] io scheduler anticipatory registered
[    1.201065] io scheduler deadline registered
[    1.201065] io scheduler cfq registered (default)
[    1.272051] pci 0000:02:00.0: Boot video device
[    1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    1.272968] assign_interrupt_mode Found MSI capability
[    1.272968] Allocate Port Service[0000:00:0c.0:pcie00]
[    1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64
[    1.272968] assign_interrupt_mode Found MSI capability
[    1.272968] Allocate Port Service[0000:00:15.0:pcie00]
[    1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64
[    1.272968] assign_interrupt_mode Found MSI capability
[    1.272968] Allocate Port Service[0000:00:16.0:pcie00]
[    1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64
[    1.272968] assign_interrupt_mode Found MSI capability
[    1.272968] Allocate Port Service[0000:00:17.0:pcie00]
[    1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64
[    1.273122] assign_interrupt_mode Found MSI capability
[    1.273122] Allocate Port Service[0000:00:18.0:pcie00]
[    1.278234] hpet_resources: 0xfed00000 is busy
[    1.278234] Linux agpgart interface v0.103
[    1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[    1.278234] pnp: the driver ''serial'' has been registered
[    1.282230] brd: module loaded
[    1.282230] input: Macintosh mouse button emulation as /class/input/input0
[    1.282230] pnp: the driver ''i8042 kbd'' has been registered
[    1.282230] i8042 kbd 00:08: driver attached
[    1.282230] pnp: the driver ''i8042 aux'' has been registered
[    1.282230] i8042 aux 00:09: driver attached
[    1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq
1,12
[    1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.302218] mice: PS/2 mouse device common for all mice
[    1.302218] pnp: the driver ''rtc_cmos'' has been registered
[    1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.302218] rtc0: alarms up to one year, y3k
[    1.302218] rtc_cmos 00:06: driver attached
[    1.302218] cpuidle: using governor ladder
[    1.302218] cpuidle: using governor menu
[    1.302218] No iBFT detected.
[    1.302563] TCP cubic registered
[    1.302563] NET: Registered protocol family 17
[    1.302563] registered taskstats version 1
[    1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09 20:49:22 UTC
(1294606162)
[    1.302563] Freeing unused kernel memory: 392k freed
[    1.326091] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm  P001Ist       11 INTL
20051117)
[    1.379078] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.379078] ACPI: Processor [P001] (supports 8 throttling states)
[    1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm  P002Ist       12 INTL
20051117)
[    1.379078] ACPI: ACPI0007:01 is registered as cooling_device1
[    1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm  P003Ist       12 INTL
20051117)
[    1.379078] ACPI: ACPI0007:02 is registered as cooling_device2
[    1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm  P004Ist       12 INTL
20051117)
[    1.383072] ACPI: ACPI0007:03 is registered as cooling_device3
[    1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0
[    1.383072] ACPI: Thermal Zone [THRM] (33 C)
[    1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2] -> GSI
22 (level, low) -> IRQ 22
[    1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64
[    1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 1
[    1.556086] ehci_hcd 0000:00:04.1: debug port 1
[    1.556086] PCI: cache line size of 32 is not supported by device
0000:00:04.1
[    1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00
[    1.556731] ohci_hcd: 2006 August 04 USB 1.1 ''Open'' Host
Controller (OHCI) Driver
[    1.560731] No dock devices found.
[    1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[    1.564968] usb usb1: configuration #1 chosen from 1 choice
[    1.564995] hub 1-0:1.0: USB hub found
[    1.565003] hub 1-0:1.0: 6 ports detected
[    1.568731] SCSI subsystem initialized
[    1.580731] libata version 3.00 loaded.
[    1.673459] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.673459] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.673459] usb usb1: Product: EHCI Host Controller
[    1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[    1.673459] usb usb1: SerialNumber: 0000:00:04.1
[    1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[    1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12] -> GSI
21 (level, low) -> IRQ 21
[    1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64
[    1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller
[    1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus
number 2
[    1.673459] ehci_hcd 0000:00:06.1: debug port 1
[    1.673459] PCI: cache line size of 32 is not supported by device
0000:00:06.1
[    1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800
[    1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[    1.689512] usb usb2: configuration #1 chosen from 1 choice
[    1.689537] hub 2-0:1.0: USB hub found
[    1.689543] hub 2-0:1.0: 6 ports detected
[    1.792316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.792319] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.792321] usb usb2: Product: EHCI Host Controller
[    1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[    1.792324] usb usb2: SerialNumber: 0000:00:06.1
[    1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[    1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0] -> GSI
20 (level, low) -> IRQ 20
[    1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64
[    1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 3
[    1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000
[    1.855515] usb usb3: configuration #1 chosen from 1 choice
[    1.855538] hub 3-0:1.0: USB hub found
[    1.855544] hub 3-0:1.0: 6 ports detected
[    1.957533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.957536] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    1.957538] usb usb3: Product: OHCI Host Controller
[    1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[    1.957541] usb usb3: SerialNumber: 0000:00:04.0
[    1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[    1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11] -> GSI
23 (level, low) -> IRQ 23
[    1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64
[    1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller
[    1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus
number 4
[    1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000
[    2.015521] usb usb4: configuration #1 chosen from 1 choice
[    2.015543] hub 4-0:1.0: USB hub found
[    2.015549] hub 4-0:1.0: 6 ports detected
[    2.105477] usb 2-3: new high speed USB device using ehci_hcd and address 2
[    2.117542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.117545] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    2.117547] usb usb4: Product: OHCI Host Controller
[    2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[    2.117550] usb usb4: SerialNumber: 0000:00:06.0
[    2.121473] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.61.
[    2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[    2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI
22 (level, low) -> IRQ 22
[    2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83 has an
invalid bInterval 30, changing to 8
[    2.275186] usb 2-3: configuration #1 chosen from 1 choice
[    2.278384] usb 2-3: New USB device found, idVendor=0bda, idProduct=0152
[    2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.278384] usb 2-3: Product: USB2.0-CRW
[    2.278384] usb 2-3: Manufacturer: Generic
[    2.278384] usb 2-3: SerialNumber: 20060413092100000
[    2.300419] Initializing USB Mass Storage driver...
[    2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr
00:22:68:3a:6a:b7
[    2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit
lnktim msi desc-v3
[    2.801910] ahci 0000:00:0b.0: version 3.0
[    2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0] -> GSI
21 (level, low) -> IRQ 21
[    2.950553] usb 3-4: new low speed USB device using ohci_hcd and address 2
[    3.169044] usb 3-4: configuration #1 chosen from 1 choice
[    3.169044] usb 3-4: New USB device found, idVendor=04eb, idProduct=e030
[    3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.169044] usb 3-4: Product: Media Center Interface
[    3.169044] usb 3-4: Manufacturer: Device
[    3.517035] usb 4-4: new low speed USB device using ohci_hcd and address 2
[    3.905098] usb 4-4: configuration #1 chosen from 1 choice
[    3.922229] usb 4-4: New USB device found, idVendor=04eb, idProduct=e033
[    3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.922233] usb 4-4: Product: eHome Infrared Transceiver
[    3.922235] usb 4-4: Manufacturer: Northstar System Corp.
[    3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000
[    3.922229] usbcore: registered new interface driver hiddev
[    3.925096] scsi0 : SCSI emulation for USB Mass Storage devices
[    3.925096] usb-storage: device found at 2
[    3.925096] usb-storage: waiting for device to settle before scanning
[    4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f
impl RAID mode
[    4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
[    4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    4.090205] scsi1 : ahci
[    4.090703] scsi2 : ahci
[    4.090703] scsi3 : ahci
[    4.090703] scsi4 : ahci
[    4.090703] scsi5 : ahci
[    4.090703] scsi6 : ahci
[    4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72100 irq
1274
[    4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72180 irq
1274
[    4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72200 irq
1274
[    4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72280 irq
1274
[    4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72300 irq
1274
[    4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72380 irq
1274
[    4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
[    4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.659284] ata1.00: configured for UDMA/133
[    5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
[    5.142984] ata2.00: configured for UDMA/100
[    5.467117] ata3: SATA link down (SStatus 0 SControl 300)
[    6.082425] ata4: SATA link down (SStatus 0 SControl 300)
[    6.405773] ata5: SATA link down (SStatus 0 SControl 300)
[    6.725774] ata6: SATA link down (SStatus 0 SControl 300)
[    7.115290] scsi 1:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2 01.0
PQ: 0 ANSI: 5
[    7.115290] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH15F     EG00
PQ: 0 ANSI: 5
[    7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19
[    7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A] -> GSI
19 (level, low) -> IRQ 19
[    7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64
[    7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] 
MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    7.467156] Driver ''sd'' needs updating - please use
bus_type methods
[    7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135
MB)
[    7.467156] sd 1:0:0:0: [sda] Write Protect is off
[    7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
[    7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135
MB)
[    7.467156] sd 1:0:0:0: [sda] Write Protect is off
[    7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
[    7.467156]  sda:<4>Driver ''sr'' needs updating -
please use bus_type methods
[    7.484514]  sda1 sda2
[    7.484644] sd 1:0:0:0: [sda] Attached SCSI disk
[    7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda
tray
[    7.712076] Uniform CD-ROM driver Revision: 3.20
[    7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    9.251645] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00995efa00016c20]
[   11.721065] usb-storage: device scan complete
[   11.721065] scsi 0:0:0:0: Direct-Access     Generic- Compact Flash    1.00
PQ: 0 ANSI: 0 CCS
[   12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[   12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0
[   17.887389] usbhid: timeout initializing reports
[   17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW] on
usb-0000:00:06.1-3
[   17.887477] usbcore: registered new interface driver usb-storage
[   17.887480] USB Mass Storage support registered.
[   18.452265] input: Device Media Center Interface as /class/input/input2
[   18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device Media
Center Interface] on usb-0000:00:04.0-4
[   18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media Center
Interface] on usb-0000:00:04.0-4
[   18.483626] usbcore: registered new interface driver usbhid
[   18.483629] usbhid: v2.6:USB HID core driver
[   18.559424] device-mapper: uevent: version 1.0.3
[   18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@redhat.com
[   18.682017] PM: Starting manual resume from disk
[   18.753394] kjournald starting.  Commit interval 5 seconds
[   18.753394] EXT3-fs: mounted filesystem with ordered data mode.
[   19.766553] udevd version 125 started
[   20.072797] input: Power Button (FF) as /class/input/input3
[   20.165593] ACPI: Power Button (FF) [PWRF]
[   20.167337] input: Power Button (CM) as /class/input/input4
[   20.231290] ACPI: Power Button (CM) [PWRB]
[   20.233467] ACPI: WMI: Mapper loaded
[   20.381495] input: PC Speaker as /class/input/input5
[   20.398514] Error: Driver ''pcspkr'' is already registered,
aborting...
[   20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[   20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA] -> GSI
20 (level, low) -> IRQ 20
[   20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   22.555585] EXT3 FS on dm-0, internal journal
[   23.159449] loop: module loaded
[   23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1.  Priority:-1
extents:1 across:24023032k
xenhost:~#





From: vchampion@gmail.com
Date: Sun, 9 Jan 2011 10:13:30 +0300
Subject: Re: [Xen-users] (no subject)
To: sawozny@hotmail.com
CC: Xen-users@lists.xensource.com

Hi!


On which state the loading of xen kernel stops? What are you seeing on display
in that moment?
Can you put dmesg here?


2011/1/9 Scott A. Wozny <sawozny@hotmail.com>


OK, so after several weeks of trying to get various versions of Xen running of
various distributions, I''m starting to wonder if I''ve got a
hardware compatibility problem and as the system never really boots with the Xen
kernel I''ve got no log files to tell me where the problem is.  I was
wondering if there''s a way to compile from source with debug turned on,
particularly for early boot problems, and where those logs get stored.
 
In my research, it seems like everyone who has had problems getting Xen running
has fixed it through errors reported during the compile process and correcting
source files to match but I''ve been poring through the thousands of
lines of output produced by the various makes I''ve been doing in
different distro and source combinations and I can''t find anything that
says "You have a problem here".  They just compile cleanly and then
don''t boot.
 
Any and all suggestions would be greatly appreciated.
 
Thanks,
 
Scott

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users 		 	   		  

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Mark Adams

2011-Jan-10 10:26 UTC

head link

Re: [Xen-users] (no subject)

On Sun, Jan 09, 2011 at 11:37:18PM +0000, Scott A. Wozny
wrote:> 
> Hi Mark,
>  
> 2 main reasons.  The secondary reason is that I''ve had poor luck
with pre-compiled Xen packages (I haven''t tried it on this distro, but
I wasn''t even able to get the live CD to work), but the primary reason
is that I need to use Xen 4 (need to be able to do guest disk resize without
shutting the guest down) and I prefer to do it on Ubuntu for which there is no
Xen 4 package.  The reason I''m here asking about Xen 3 is because I was
getting so frustrated trying to get Xen 4 to compile that I thought perhaps it
was too new and a more mature code base like Xen 3 might compile and install
properly for me.  Once I got that to work I was going to take what I had learned
and go back to my original Xen 4 plan, hopefully with knowledge that would help
me get that to work.  However, now that I realize I can''t get Xen 3 to
compile and work properly on this box either, I''ve been thinking I have
a hardware compatibility problem which is why I posted to this forum asking for
any tips and tricks people could share on tracking down whether there really was
a hardware compatibility problem here and from there how to fix it.  Primarily
this is a learning exercise for me so I can eventually get back to my original
goal.
>  
> If you have any suggestions on how to get there, I''m definitely
interested in hearing your thoughts.
I run a load of servers on Debian squeeze, which uses xen 4.0.1 at
present and works pretty well (had some issues with vt-d stuff..).
Extremely simply setup, you just have to change the order in
/etc/grub.d/ to get xen to boot by default.

Packages that should give you everything you need:

xen-linux-system-2.6.32-5-xen-amd64
xen-qemu-dm-4.0 (this for hvm)

Regards,
Mark
>  
> Thanks,
>  
> Scott
>  
> 
> 
> CC: vchampion@gmail.com; xen-users@lists.xensource.com
> From: mark@campbell-lange.net
> Subject: Re: [Xen-users] (no subject)
> Date: Sun, 9 Jan 2011 23:18:18 +0000
> To: sawozny@hotmail.com
> 
> 
> 
> 
> 
> On 9 Jan 2011, at 21:11, "Scott A. Wozny"
<sawozny@hotmail.com> wrote:
> 
> 
> 
> 
> First of all, sorry about the lack of a subject on the email.  I''m
usually better about that stuff.
>  
> Anyway, the boot sequence goes by pretty fast, but here is the results of
booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built per
the instructions found at 
http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/
:
> 
> 
> 
> 
> Why are you compiling from source with debian? Just install the
xen-linux-system packages.
> 
> Regards,
> Mark
> 
> 
> 
> Grub Entry:
> root (hd0,0)
> kernel /xen-3.4.3.gz
> module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
> module /initrd.img-2.6.18.8-xen
> 
> 
> Boot results:
> 
> 
> Booting ''Xen 3.4.3 / Debian GNU/Linux, kernel
2.6.18.8-xen''
> 
> 
> root (hd0,0)
>  Filesystem type is extfs2, partition type 0x83
> kernel /xen-3.4.3.gz
>    [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078,
entry=0x100000]
> 
> module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
>    [Multiboot-module @0x298000, 0x7412d8 bytes]
> module /initrd.img-2.6.18.8-xen
>    [Multiboot-module @0x9d (this line displays to varying lengths each
time, but it goes by so fast I can''t get the rest of it before the
machine reboots)
> 
> 
> 
> 
> A different xen kernel also showed up in my grub that doesn''t
reboot, but also doesn''t boot properly.  Here are the results of that
if it helps:
> 
> 
> Grub entry:
> root (hd0,0)
> kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> initrd /initrd.img-2.6.18.8-xen
> 
> 
> Boot results:
> 
> 
>    Booting ''Debian GNU/Linux, kernel 2.6.18.8-xen''
> 
> 
> root (hd0,0)
>  Filesystem type is extfs2, partition type 0x83
> kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> 
> 
> Error 13: Invalid or unsupported executable format
> 
> 
> Press any key to continue...
>  
> Here are the dmesg file contents once I booted back into the original
kernel built as part of the Debian 5.0.7 install (if you can recommend any good
resources on interpreting dmesg output I''d appreciate it; in the
meantime I''ll start with Google; also, there was a TV card and modem in
the machine that an earlier version of the dmesg file was complaining about
compatibility; I don''t need either so I''ve pulled them out of
the machine and these are the results of the machine booting without them, but
do you think I should do a full reinstall now that they''re gone?):
>  
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Thu Nov 25 04:30:55 UTC 2010
> [    0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> [    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
> [    0.000000]  BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
> [    0.000000]  BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
> [    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> [    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
> [    0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
> [    0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200
used
> [    0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of
3200 used
> [    0.000000] max_pfn_mapped = 2293760
> [    0.000000] init_memory_mapping
> [    0.000000] DMI present.
> [    0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM)
> [    0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717 MSFT 
97)
> [    0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717 MSFT 
97)
> [    0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1  8A7G1 8A7G1-C0        4 INTL
20051117)
> [    0.000000] ACPI: FACS CFFAE000, 0040
> [    0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717 MSFT 
97)
> [    0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG  20090717 MSFT 
97)
> [    0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717 MSFT 
97)
> [    0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT  20090717 MSFT 
97)
> [    0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717 MSFT 
97)
> [    0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717 MSFT 
97)
> [    0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS  NVHDCP  20090717 MSFT 
97)
> [    0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717 MSFT 
97)
> [    0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm    CpuPm       12 INTL
20051117)
> [    0.000000] No NUMA configuration found
> [    0.000000] Faking a node at 0000000000000000-0000000230000000
> [    0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
> [    0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200
used
> [    0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of
3200 used
> [    0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
> [    0.000000]   NODE_DATA [0000000000012000 - 0000000000016fff]
> [    0.000000]   bootmap [0000000000017000 -  000000000005cfff] pages 46
> [    0.000000]   early res: 0 [0-fff] BIOS data page
> [    0.000000]   early res: 1 [6000-7fff] TRAMPOLINE
> [    0.000000]   early res: 2 [200000-675397] TEXT DATA BSS
> [    0.000000]   early res: 3 [378c2000-37fef99a] RAMDISK
> [    0.000000]   early res: 4 [9bc00-fffff] BIOS reserved
> [    0.000000]   early res: 5 [8000-11fff] PGTABLE
> [    0.000000]  [ffffe20000000000-ffffe20002dfffff] PMD ->
[ffff810001200000-ffff810003ffffff] on node 0
> [    0.000000]  [ffffe20003800000-ffffe20007bfffff] PMD ->
[ffff81000c000000-ffff8100103fffff] on node 0
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA             0 ->     4096
> [    0.000000]   DMA32        4096 ->  1048576
> [    0.000000]   Normal    1048576 ->  2293760
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[3] active PFN ranges
> [    0.000000]     0:        0 ->      155
> [    0.000000]     0:      256 ->   851872
> [    0.000000]     0:  1048576 ->  2293760
> [    0.000000] On node 0 totalpages: 2096955
> [    0.000000]   DMA zone: 56 pages used for memmap
> [    0.000000]   DMA zone: 1256 pages reserved
> [    0.000000]   DMA zone: 2683 pages, LIFO batch:0
> [    0.000000]   DMA32 zone: 14280 pages used for memmap
> [    0.000000]   DMA32 zone: 833496 pages, LIFO batch:31
> [    0.000000]   Normal zone: 17024 pages used for memmap
> [    0.000000]   Normal zone: 1228160 pages, LIFO batch:31
> [    0.000000]   Movable zone: 0 pages used for memmap
> [    0.000000] ACPI: PM-Timer IO Port: 0x4008
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI
0-23
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] ACPI: IRQ14 used by override.
> [    0.000000] ACPI: IRQ15 used by override.
> [    0.000000] Setting APIC routing to flat
> [    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] PM: Registered nosave memory: 000000000009b000 -
000000000009c000
> [    0.000000] PM: Registered nosave memory: 000000000009c000 -
00000000000a0000
> [    0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
> [    0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
> [    0.000000] PM: Registered nosave memory: 00000000cffa0000 -
00000000cffae000
> [    0.000000] PM: Registered nosave memory: 00000000cffae000 -
00000000cfff0000
> [    0.000000] PM: Registered nosave memory: 00000000cfff0000 -
00000000d0000000
> [    0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000fec00000
> [    0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
> [    0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fee00000
> [    0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
> [    0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000fff00000
> [    0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
> [    0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
> [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [    0.000000] PERCPU: Allocating 37168 bytes of per cpu data
> [    0.000000] NR_CPUS: 32, nr_cpu_ids: 4
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on. 
Total pages: 2064339
> [    0.000000] Policy zone: Normal
> [    0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro quiet
> [    0.000000] Initializing CPU#0
> [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [    0.000000] TSC calibrated against PM_TIMER
> [    0.000000] time.c: Detected 2333.293 MHz processor.
> [    0.004000] spurious 8259A interrupt: IRQ7.
> [    0.004000] Console: colour VGA+ 80x25
> [    0.004000] console [tty0] enabled
> [    0.004000] Checking aperture...
> [    0.004000] Calgary: detecting Calgary via BIOS EBDA area
> [    0.004000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
> [    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
> [    0.004000] Memory: 8192680k/9175040k available (2229k kernel code,
195140k reserved, 1084k data, 392k init)
> [    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> [    0.004000] hpet clockevent registered
> [    0.083840] Calibrating delay using timer specific routine.. 4671.46
BogoMIPS (lpj=9342927)
> [    0.083878] Security Framework initialized
> [    0.083884] SELinux:  Disabled at boot.
> [    0.083887] Capability LSM initialized
> [    0.084005] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
> [    0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> [    0.090266] Mount-cache hash table entries: 256
> [    0.090428] Initializing cgroup subsys ns
> [    0.090433] Initializing cgroup subsys cpuacct
> [    0.090436] Initializing cgroup subsys devices
> [    0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.090459] CPU: L2 cache: 2048K
> [    0.090461] CPU 0/0 -> Node 0
> [    0.090462] CPU: Physical Processor ID: 0
> [    0.090463] CPU: Processor Core ID: 0
> [    0.090471] CPU0: Thermal monitoring enabled (TM2)
> [    0.090472] using mwait in idle threads.
> [    0.091391] ACPI: Core revision 20080321
> [    0.142651] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz
stepping 07
> [    0.142654] Using local APIC timer interrupts.
> [    0.148009] APIC timer calibration result 20833012
> [    0.148009] Detected 20.833 MHz APIC timer.
> [    0.148009] Booting processor 1/1 ip 6000
> [    0.156009] Initializing CPU#1
> [    0.156009] Calibrating delay using timer specific routine.. 4666.64
BogoMIPS (lpj=9333287)
> [    0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.156009] CPU: L2 cache: 2048K
> [    0.156009] CPU 1/1 -> Node 0
> [    0.156009] CPU: Physical Processor ID: 0
> [    0.156009] CPU: Processor Core ID: 1
> [    0.156009] CPU1: Thermal monitoring enabled (TM2)
> [    0.236014] CPU1: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz
stepping 07
> [    0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [    0.240015] Booting processor 2/2 ip 6000
> [    0.248015] Initializing CPU#2
> [    0.248015] Calibrating delay using timer specific routine.. 4666.71
BogoMIPS (lpj=9333433)
> [    0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.248015] CPU: L2 cache: 2048K
> [    0.248015] CPU 2/2 -> Node 0
> [    0.248015] CPU: Physical Processor ID: 0
> [    0.248015] CPU: Processor Core ID: 2
> [    0.248015] CPU2: Thermal monitoring enabled (TM2)
> [    0.327750] CPU2: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz
stepping 07
> [    0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> [    0.332020] Booting processor 3/3 ip 6000
> [    0.340021] Initializing CPU#3
> [    0.340021] Calibrating delay using timer specific routine.. 4666.67
BogoMIPS (lpj=9333345)
> [    0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.340021] CPU: L2 cache: 2048K
> [    0.340021] CPU 3/3 -> Node 0
> [    0.340021] CPU: Physical Processor ID: 0
> [    0.340021] CPU: Processor Core ID: 3
> [    0.340021] CPU3: Thermal monitoring enabled (TM2)
> [    0.419670] CPU3: Intel(R) Core(TM)2 Quad  CPU   Q8200  @ 2.33GHz
stepping 07
> [    0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> [    0.424026] Brought up 4 CPUs
> [    0.424026] Total of 4 processors activated (18671.49 BogoMIPS).
> [    0.424026] CPU0 attaching sched-domain:
> [    0.424026]  domain 0: span 0-1
> [    0.424026]   groups: 0 1
> [    0.424026]   domain 1: span 0-3
> [    0.424026]    groups: 0-1 2-3
> [    0.424026]    domain 2: span 0-3
> [    0.424026]     groups: 0-3
> [    0.424026] CPU1 attaching sched-domain:
> [    0.424026]  domain 0: span 0-1
> [    0.424026]   groups: 1 0
> [    0.424026]   domain 1: span 0-3
> [    0.424026]    groups: 0-1 2-3
> [    0.424026]    domain 2: span 0-3
> [    0.424026]     groups: 0-3
> [    0.424026] CPU2 attaching sched-domain:
> [    0.424026]  domain 0: span 2-3
> [    0.424026]   groups: 2 3
> [    0.424026]   domain 1: span 0-3
> [    0.424026]    groups: 2-3 0-1
> [    0.424026]    domain 2: span 0-3
> [    0.424026]     groups: 0-3
> [    0.424026] CPU3 attaching sched-domain:
> [    0.424026]  domain 0: span 2-3
> [    0.424026]   groups: 3 2
> [    0.424026]   domain 1: span 0-3
> [    0.424026]    groups: 2-3 0-1
> [    0.424026]    domain 2: span 0-3
> [    0.424026]     groups: 0-3
> [    0.424026] net_namespace: 1224 bytes
> [    0.424026] Booting paravirtualized kernel on bare hardware
> [    0.424026] NET: Registered protocol family 16
> [    0.424026] ACPI: bus type pci registered
> [    0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
> [    0.424026] PCI: Not using MMCONFIG.
> [    0.424026] PCI: Using configuration type 1 for base access
> [    0.428602] ACPI: EC: Look up EC in DSDT
> [    0.447520] ACPI: Interpreter enabled
> [    0.447523] ACPI: (supports S0 S1 S3 S4 S5)
> [    0.447539] ACPI: Using IOAPIC for interrupt routing
> [    0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
255
> [    0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
> [    0.470851] PCI: Using MMCONFIG at e0000000 - efffffff
> [    0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [    0.500771] PCI: Transparent bridge - 0000:00:09.0
> [    0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
> [    0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
> [    0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> [    0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> [    0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> [    0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> [    0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
disabled.
> [    0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0,
disabled.
> [    0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
> [    0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
> [    0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7
> [    0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
> [    0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
disabled.
> [    0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
disabled.
> [    0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
disabled.
> [    0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
disabled.
> [    0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
> [    0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> [    0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
> [    0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
> [    0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0,
disabled.
> [    0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
> [    0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
> [    0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> [    0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
> [    0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
> [    0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
> [    0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
> [    0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0,
disabled.
> [    0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0,
disabled.
> [    0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
> [    0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
> [    0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
> [    0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
> [    0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay
> [    0.540903] pnp: PnP ACPI init
> [    0.540903] ACPI: bus type pnp registered
> [    0.540903] pnp 00:00: parse allocated resources
> [    0.540903] pnp 00:00:   add io  0xcf8-0xcff flags 0x1
> [    0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> [    0.540903] pnp 00:01: parse allocated resources
> [    0.540903] pnp 00:01:   add dma 4 flags 0x4
> [    0.540903] pnp 00:01:   add io  0x0-0xf flags 0x1
> [    0.540903] pnp 00:01:   add io  0x81-0x83 flags 0x1
> [    0.540903] pnp 00:01:   add io  0x87-0x87 flags 0x1
> [    0.540903] pnp 00:01:   add io  0x89-0x8b flags 0x1
> [    0.540903] pnp 00:01:   add io  0x8f-0x8f flags 0x1
> [    0.540903] pnp 00:01:   add io  0xc0-0xdf flags 0x1
> [    0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [    0.540926] pnp 00:02: parse allocated resources
> [    0.540930] pnp 00:02:   add io  0x61-0x61 flags 0x1
> [    0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
> [    0.544903] pnp 00:03: parse allocated resources
> [    0.544903] pnp 00:03:   add io  0xf0-0xff flags 0x1
> [    0.544903] pnp 00:03:   add irq 13 flags 0x1
> [    0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> [    0.544903] pnp 00:04: parse allocated resources
> [    0.544903] pnp 00:04:   add io  0x10-0x1f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x22-0x3f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x44-0x4d flags 0x1
> [    0.544903] pnp 00:04:   add io  0x50-0x5f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x62-0x63 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x65-0x6f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x72-0x7f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x80-0x80 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x84-0x86 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x88-0x88 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x8c-0x8e flags 0x1
> [    0.544903] pnp 00:04:   add io  0x90-0x9f flags 0x1
> [    0.544903] pnp 00:04:   add io  0xa2-0xbf flags 0x1
> [    0.544903] pnp 00:04:   add io  0xe0-0xef flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4d0-0x4d1 flags 0x1
> [    0.544903] pnp 00:04:   add io  0x800-0x80f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4000-0x407f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4080-0x40ff flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4400-0x447f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4480-0x44ff flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4800-0x487f flags 0x1
> [    0.544903] pnp 00:04:   add io  0x4880-0x48ff flags 0x1
> [    0.544903] pnp 00:04:   add mem 0x0-0xffffffffffffffff flags 0x10000000
> [    0.544903] pnp 00:04:   add mem 0xfefe2000-0xfefe3fff flags 0x0
> [    0.544903] pnp 00:04:   add mem 0xfefe1000-0xfefe1fff flags 0x0
> [    0.544903] pnp 00:04:   add mem 0xfee01000-0xfeefffff flags 0x0
> [    0.544903] pnp 00:04: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.544903] pnp 00:05: parse allocated resources
> [    0.544903] pnp 00:05:   add mem 0xfed00000-0xfed00fff flags 0x1
> [    0.544903] pnp 00:05:   add irq 8 flags 0x1
> [    0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
> [    0.544903] pnp 00:06: parse allocated resources
> [    0.544903] pnp 00:06:   add io  0x70-0x71 flags 0x1
> [    0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> [    0.544903] pnp 00:07: parse allocated resources
> [    0.544903] pnp 00:07:   add mem 0xfec00000-0xfec00fff flags 0x0
> [    0.544903] pnp 00:07:   add mem 0xfee00000-0xfee00fff flags 0x0
> [    0.544903] pnp 00:07: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.544903] pnp 00:08: parse allocated resources
> [    0.544903] pnp 00:08:   add io  0x60-0x60 flags 0x1
> [    0.544903] pnp 00:08:   add io  0x64-0x64 flags 0x1
> [    0.544903] pnp 00:08:   add irq 1 flags 0x1
> [    0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
> [    0.548903] pnp 00:09: parse allocated resources
> [    0.548903] pnp 00:09:   add irq 12 flags 0x1
> [    0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
(active)
> [    0.548903] pnp 00:0a: parse allocated resources
> [    0.548903] pnp 00:0a:   add io  0x0-0xffffffffffffffff flags 0x10000001
> [    0.548903] pnp 00:0a:   add io  0xa00-0xa0f flags 0x1
> [    0.548903] pnp 00:0a:   add io  0xa10-0xa1f flags 0x1
> [    0.548903] pnp 00:0a:   add io  0xa20-0xa2f flags 0x1
> [    0.548903] pnp 00:0a:   add io  0xa30-0xa3f flags 0x1
> [    0.548903] pnp 00:0a: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.548903] pnp 00:0b: parse allocated resources
> [    0.548903] pnp 00:0b:   add mem 0xe0000000-0xefffffff flags 0x0
> [    0.548903] pnp 00:0b: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.548903] pnp 00:0c: parse allocated resources
> [    0.548903] pnp 00:0c:   add mem 0x0-0x9ffff flags 0x1
> [    0.548903] pnp 00:0c:   add mem 0xc0000-0xcffff flags 0x0
> [    0.548903] pnp 00:0c:   add mem 0xe0000-0xfffff flags 0x0
> [    0.548903] pnp 00:0c:   add mem 0x100000-0xcfffffff flags 0x1
> [    0.548903] pnp 00:0c:   add mem 0xfec00000-0xffffffff flags 0x0
> [    0.548903] pnp 00:0c: PNP0c01: calling
quirk_system_pci_resources+0x0/0x15c
> [    0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> [    0.554581] pnp: PnP ACPI: found 13 devices
> [    0.554581] ACPI: ACPI bus type pnp unregistered
> [    0.554581] usbcore: registered new interface driver usbfs
> [    0.554581] usbcore: registered new interface driver hub
> [    0.554581] usbcore: registered new device driver usb
> [    0.554581] PCI: Using ACPI for IRQ routing
> [    0.571245] PCI-GART: No AMD northbridge found.
> [    0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
> [    0.571257] hpet0: 4 64-bit timers, 25000000 Hz
> [    0.575216] ACPI: RTC can wake from S4
> [    0.578101] Switched to high resolution mode on CPU 0
> [    0.578546] Switched to high resolution mode on CPU 1
> [    0.578551] Switched to high resolution mode on CPU 3
> [    0.579207] Switched to high resolution mode on CPU 2
> [    0.590046] pnp: the driver ''system'' has been
registered
> [    0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
> [    0.590062] system 00:04: ioport range 0x800-0x80f has been reserved
> [    0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved
> [    0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved
> [    0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved
> [    0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved
> [    0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved
> [    0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved
> [    0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been
reserved
> [    0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been
reserved
> [    0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been
reserved
> [    0.590087] system 00:04: driver attached
> [    0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
> [    0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
> [    0.590099] system 00:07: driver attached
> [    0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved
> [    0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved
> [    0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved
> [    0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved
> [    0.590115] system 00:0a: driver attached
> [    0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
> [    0.590122] system 00:0b: driver attached
> [    0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
> [    0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
> [    0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
> [    0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
> [    0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not be
reserved
> [    0.590140] system 00:0c: driver attached
> [    0.593429] PCI: Bridge: 0000:00:09.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: disabled.
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Bridge: 0000:00:0c.0
> [    0.593429]   IO window: e000-efff
> [    0.593429]   MEM window: 0xfa000000-0xfeafffff
> [    0.593429]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
> [    0.593429] PCI: Bridge: 0000:00:15.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: disabled.
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Bridge: 0000:00:16.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: disabled.
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Bridge: 0000:00:17.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: 0xfeb00000-0xfebfffff
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Bridge: 0000:00:18.0
> [    0.593429]   IO window: disabled.
> [    0.593429]   MEM window: disabled.
> [    0.593429]   PREFETCH window: disabled.
> [    0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64
> [    0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
> [    0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0] ->
GSI 23 (level, low) -> IRQ 23
> [    0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> [    0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
> [    0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3] ->
GSI 22 (level, low) -> IRQ 22
> [    0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64
> [    0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
> [    0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4] ->
GSI 21 (level, low) -> IRQ 21
> [    0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64
> [    0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
> [    0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5] ->
GSI 20 (level, low) -> IRQ 20
> [    0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64
> [    0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
> [    0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6] ->
GSI 23 (level, low) -> IRQ 23
> [    0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64
> [    0.593430] NET: Registered protocol family 2
> [    0.642185] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
> [    0.644364] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
> [    0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [    0.649453] TCP: Hash tables configured (established 524288 bind 65536)
> [    0.649456] TCP reno registered
> [    0.658058] NET: Registered protocol family 1
> [    0.658160] checking if image is initramfs... it is
> [    1.186404] Freeing initrd memory: 7350k freed
> [    1.191507] audit: initializing netlink socket (disabled)
> [    1.191507] type=2000 audit(1294606162.172:1): initialized
> [    1.201065] Total HugeTLB memory allocated, 0
> [    1.201065] VFS: Disk quotas dquot_6.5.1
> [    1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    1.201065] msgmni has been set to 16015
> [    1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
> [    1.201065] io scheduler noop registered
> [    1.201065] io scheduler anticipatory registered
> [    1.201065] io scheduler deadline registered
> [    1.201065] io scheduler cfq registered (default)
> [    1.272051] pci 0000:02:00.0: Boot video device
> [    1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> [    1.272968] assign_interrupt_mode Found MSI capability
> [    1.272968] Allocate Port Service[0000:00:0c.0:pcie00]
> [    1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64
> [    1.272968] assign_interrupt_mode Found MSI capability
> [    1.272968] Allocate Port Service[0000:00:15.0:pcie00]
> [    1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64
> [    1.272968] assign_interrupt_mode Found MSI capability
> [    1.272968] Allocate Port Service[0000:00:16.0:pcie00]
> [    1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64
> [    1.272968] assign_interrupt_mode Found MSI capability
> [    1.272968] Allocate Port Service[0000:00:17.0:pcie00]
> [    1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64
> [    1.273122] assign_interrupt_mode Found MSI capability
> [    1.273122] Allocate Port Service[0000:00:18.0:pcie00]
> [    1.278234] hpet_resources: 0xfed00000 is busy
> [    1.278234] Linux agpgart interface v0.103
> [    1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
> [    1.278234] pnp: the driver ''serial'' has been
registered
> [    1.282230] brd: module loaded
> [    1.282230] input: Macintosh mouse button emulation as
/class/input/input0
> [    1.282230] pnp: the driver ''i8042 kbd'' has been
registered
> [    1.282230] i8042 kbd 00:08: driver attached
> [    1.282230] pnp: the driver ''i8042 aux'' has been
registered
> [    1.282230] i8042 aux 00:09: driver attached
> [    1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
> [    1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    1.302218] mice: PS/2 mouse device common for all mice
> [    1.302218] pnp: the driver ''rtc_cmos'' has been
registered
> [    1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [    1.302218] rtc0: alarms up to one year, y3k
> [    1.302218] rtc_cmos 00:06: driver attached
> [    1.302218] cpuidle: using governor ladder
> [    1.302218] cpuidle: using governor menu
> [    1.302218] No iBFT detected.
> [    1.302563] TCP cubic registered
> [    1.302563] NET: Registered protocol family 17
> [    1.302563] registered taskstats version 1
> [    1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09 20:49:22
UTC (1294606162)
> [    1.302563] Freeing unused kernel memory: 392k freed
> [    1.326091] input: AT Translated Set 2 keyboard as /class/input/input1
> [    1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm  P001Ist       11 INTL
20051117)
> [    1.379078] ACPI: ACPI0007:00 is registered as cooling_device0
> [    1.379078] ACPI: Processor [P001] (supports 8 throttling states)
> [    1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm  P002Ist       12 INTL
20051117)
> [    1.379078] ACPI: ACPI0007:01 is registered as cooling_device1
> [    1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm  P003Ist       12 INTL
20051117)
> [    1.379078] ACPI: ACPI0007:02 is registered as cooling_device2
> [    1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm  P004Ist       12 INTL
20051117)
> [    1.383072] ACPI: ACPI0007:03 is registered as cooling_device3
> [    1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0
> [    1.383072] ACPI: Thermal Zone [THRM] (33 C)
> [    1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
> [    1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2] ->
GSI 22 (level, low) -> IRQ 22
> [    1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64
> [    1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller
> [    1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 1
> [    1.556086] ehci_hcd 0000:00:04.1: debug port 1
> [    1.556086] PCI: cache line size of 32 is not supported by device
0000:00:04.1
> [    1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00
> [    1.556731] ohci_hcd: 2006 August 04 USB 1.1 ''Open''
Host Controller (OHCI) Driver
> [    1.560731] No dock devices found.
> [    1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
> [    1.564968] usb usb1: configuration #1 chosen from 1 choice
> [    1.564995] hub 1-0:1.0: USB hub found
> [    1.565003] hub 1-0:1.0: 6 ports detected
> [    1.568731] SCSI subsystem initialized
> [    1.580731] libata version 3.00 loaded.
> [    1.673459] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
> [    1.673459] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [    1.673459] usb usb1: Product: EHCI Host Controller
> [    1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> [    1.673459] usb usb1: SerialNumber: 0000:00:04.1
> [    1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
> [    1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12] ->
GSI 21 (level, low) -> IRQ 21
> [    1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64
> [    1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller
> [    1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus
number 2
> [    1.673459] ehci_hcd 0000:00:06.1: debug port 1
> [    1.673459] PCI: cache line size of 32 is not supported by device
0000:00:06.1
> [    1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800
> [    1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
> [    1.689512] usb usb2: configuration #1 chosen from 1 choice
> [    1.689537] hub 2-0:1.0: USB hub found
> [    1.689543] hub 2-0:1.0: 6 ports detected
> [    1.792316] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
> [    1.792319] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [    1.792321] usb usb2: Product: EHCI Host Controller
> [    1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> [    1.792324] usb usb2: SerialNumber: 0000:00:06.1
> [    1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
> [    1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0] ->
GSI 20 (level, low) -> IRQ 20
> [    1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64
> [    1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller
> [    1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 3
> [    1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000
> [    1.855515] usb usb3: configuration #1 chosen from 1 choice
> [    1.855538] hub 3-0:1.0: USB hub found
> [    1.855544] hub 3-0:1.0: 6 ports detected
> [    1.957533] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
> [    1.957536] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [    1.957538] usb usb3: Product: OHCI Host Controller
> [    1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> [    1.957541] usb usb3: SerialNumber: 0000:00:04.0
> [    1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
> [    1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11] ->
GSI 23 (level, low) -> IRQ 23
> [    1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64
> [    1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller
> [    1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus
number 4
> [    1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000
> [    2.015521] usb usb4: configuration #1 chosen from 1 choice
> [    2.015543] hub 4-0:1.0: USB hub found
> [    2.015549] hub 4-0:1.0: 6 ports detected
> [    2.105477] usb 2-3: new high speed USB device using ehci_hcd and
address 2
> [    2.117542] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
> [    2.117545] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [    2.117547] usb usb4: Product: OHCI Host Controller
> [    2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> [    2.117550] usb usb4: SerialNumber: 0000:00:06.0
> [    2.121473] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
> [    2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
> [    2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] ->
GSI 22 (level, low) -> IRQ 22
> [    2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> [    2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83 has
an invalid bInterval 30, changing to 8
> [    2.275186] usb 2-3: configuration #1 chosen from 1 choice
> [    2.278384] usb 2-3: New USB device found, idVendor=0bda, idProduct=0152
> [    2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> [    2.278384] usb 2-3: Product: USB2.0-CRW
> [    2.278384] usb 2-3: Manufacturer: Generic
> [    2.278384] usb 2-3: SerialNumber: 20060413092100000
> [    2.300419] Initializing USB Mass Storage driver...
> [    2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr
00:22:68:3a:6a:b7
> [    2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit
lnktim msi desc-v3
> [    2.801910] ahci 0000:00:0b.0: version 3.0
> [    2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
> [    2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0] ->
GSI 21 (level, low) -> IRQ 21
> [    2.950553] usb 3-4: new low speed USB device using ohci_hcd and address
2
> [    3.169044] usb 3-4: configuration #1 chosen from 1 choice
> [    3.169044] usb 3-4: New USB device found, idVendor=04eb, idProduct=e030
> [    3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> [    3.169044] usb 3-4: Product: Media Center Interface
> [    3.169044] usb 3-4: Manufacturer: Device
> [    3.517035] usb 4-4: new low speed USB device using ohci_hcd and address
2
> [    3.905098] usb 4-4: configuration #1 chosen from 1 choice
> [    3.922229] usb 4-4: New USB device found, idVendor=04eb, idProduct=e033
> [    3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> [    3.922233] usb 4-4: Product: eHome Infrared Transceiver
> [    3.922235] usb 4-4: Manufacturer: Northstar System Corp.
> [    3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000
> [    3.922229] usbcore: registered new interface driver hiddev
> [    3.925096] scsi0 : SCSI emulation for USB Mass Storage devices
> [    3.925096] usb-storage: device found at 2
> [    3.925096] usb-storage: waiting for device to settle before scanning
> [    4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl RAID mode
> [    4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum
part
> [    4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64
> [    4.090205] scsi1 : ahci
> [    4.090703] scsi2 : ahci
> [    4.090703] scsi3 : ahci
> [    4.090703] scsi4 : ahci
> [    4.090703] scsi5 : ahci
> [    4.090703] scsi6 : ahci
> [    4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72100 irq 1274
> [    4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72180 irq 1274
> [    4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72200 irq 1274
> [    4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72280 irq 1274
> [    4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72300 irq 1274
> [    4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72380 irq 1274
> [    4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max
UDMA/133
> [    4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth
31/32)
> [    4.659284] ata1.00: configured for UDMA/133
> [    5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
> [    5.142984] ata2.00: configured for UDMA/100
> [    5.467117] ata3: SATA link down (SStatus 0 SControl 300)
> [    6.082425] ata4: SATA link down (SStatus 0 SControl 300)
> [    6.405773] ata5: SATA link down (SStatus 0 SControl 300)
> [    6.725774] ata6: SATA link down (SStatus 0 SControl 300)
> [    7.115290] scsi 1:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2
01.0 PQ: 0 ANSI: 5
> [    7.115290] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH15F    
EG00 PQ: 0 ANSI: 5
> [    7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19
> [    7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A] ->
GSI 19 (level, low) -> IRQ 19
> [    7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64
> [    7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] 
MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
> [    7.467156] Driver ''sd'' needs updating - please use
bus_type methods
> [    7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> [    7.467156] sd 1:0:0:0: [sda] Write Protect is off
> [    7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
> [    7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> [    7.467156] sd 1:0:0:0: [sda] Write Protect is off
> [    7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
> [    7.467156]  sda:<4>Driver ''sr'' needs updating -
please use bus_type methods
> [    7.484514]  sda1 sda2
> [    7.484644] sd 1:0:0:0: [sda] Attached SCSI disk
> [    7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2
cdda tray
> [    7.712076] Uniform CD-ROM driver Revision: 3.20
> [    7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0
> [    7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0
> [    7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5
> [    9.251645] ieee1394: Host added: ID:BUS[0-00:1023] 
GUID[00995efa00016c20]
> [   11.721065] usb-storage: device scan complete
> [   11.721065] scsi 0:0:0:0: Direct-Access     Generic- Compact Flash   
1.00 PQ: 0 ANSI: 0 CCS
> [   12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk
> [   12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0
> [   17.887389] usbhid: timeout initializing reports
> [   17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW]
on usb-0000:00:06.1-3
> [   17.887477] usbcore: registered new interface driver usb-storage
> [   17.887480] USB Mass Storage support registered.
> [   18.452265] input: Device Media Center Interface as /class/input/input2
> [   18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device Media
Center Interface] on usb-0000:00:04.0-4
> [   18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media Center
Interface] on usb-0000:00:04.0-4
> [   18.483626] usbcore: registered new interface driver usbhid
> [   18.483629] usbhid: v2.6:USB HID core driver
> [   18.559424] device-mapper: uevent: version 1.0.3
> [   18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@redhat.com
> [   18.682017] PM: Starting manual resume from disk
> [   18.753394] kjournald starting.  Commit interval 5 seconds
> [   18.753394] EXT3-fs: mounted filesystem with ordered data mode.
> [   19.766553] udevd version 125 started
> [   20.072797] input: Power Button (FF) as /class/input/input3
> [   20.165593] ACPI: Power Button (FF) [PWRF]
> [   20.167337] input: Power Button (CM) as /class/input/input4
> [   20.231290] ACPI: Power Button (CM) [PWRB]
> [   20.233467] ACPI: WMI: Mapper loaded
> [   20.381495] input: PC Speaker as /class/input/input5
> [   20.398514] Error: Driver ''pcspkr'' is already
registered, aborting...
> [   20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
> [   20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA] ->
GSI 20 (level, low) -> IRQ 20
> [   20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64
> [   22.555585] EXT3 FS on dm-0, internal journal
> [   23.159449] loop: module loaded
> [   23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1. 
Priority:-1 extents:1 across:24023032k
> xenhost:~#
> 
> 
> 
> 
> 
> From: vchampion@gmail.com
> Date: Sun, 9 Jan 2011 10:13:30 +0300
> Subject: Re: [Xen-users] (no subject)
> To: sawozny@hotmail.com
> CC: Xen-users@lists.xensource.com
> 
> Hi!
> 
> 
> On which state the loading of xen kernel stops? What are you seeing on
display in that moment?
> Can you put dmesg here?
> 
> 
> 2011/1/9 Scott A. Wozny <sawozny@hotmail.com>
> 
> 
> OK, so after several weeks of trying to get various versions of Xen running
of various distributions, I''m starting to wonder if I''ve got a
hardware compatibility problem and as the system never really boots with the Xen
kernel I''ve got no log files to tell me where the problem is.  I was
wondering if there''s a way to compile from source with debug turned on,
particularly for early boot problems, and where those logs get stored.
>  
> In my research, it seems like everyone who has had problems getting Xen
running has fixed it through errors reported during the compile process and
correcting source files to match but I''ve been poring through the
thousands of lines of output produced by the various makes I''ve been
doing in different distro and source combinations and I can''t find
anything that says "You have a problem here".  They just compile
cleanly and then don''t boot.
>  
> Any and all suggestions would be greatly appreciated.
>  
> Thanks,
>  
> Scott
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users 		 	   		  
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Pasi Kärkkäinen

2011-Jan-10 17:31 UTC

head link

Re: [Xen-users] (no subject)

On Sun, Jan 09, 2011 at 02:16:01AM +0000, Scott A. Wozny
wrote:>    OK, so after several weeks of trying to get various versions of Xen
>    running of various distributions, I''m starting to wonder if
I''ve got a
>    hardware compatibility problem and as the system never really boots with
>    the Xen kernel I''ve got no log files to tell me where the
problem is.  I
>    was wondering if there''s a way to compile from source with
debug turned
>    on, particularly for early boot problems, and where those logs get
>    stored.
> 
>    In my research, it seems like everyone who has had problems getting Xen
>    running has fixed it through errors reported during the compile process
>    and correcting source files to match but I''ve been poring
through the
>    thousands of lines of output produced by the various makes I''ve
been doing
>    in different distro and source combinations and I can''t find
anything that
>    says "You have a problem here".  They just compile cleanly and
then don''t
>    boot.
> 
>    Any and all suggestions would be greatly appreciated.
> 
A couple of tutorials:
http://wiki.xen.org/xenwiki/RHEL6Xen4Tutorial
http://wiki.xen.org/xenwiki/Fedora13Xen4Tutorial

and more links:
http://wiki.xen.org/xenwiki/Xen4.0

-- Pasi


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Scott A. Wozny

2011-Jan-16 17:17 UTC

head link

RE: [Xen-users] (no subject)

Hi Mark,
 
First of all, thanks for the suggestion of giving Squeeze a try with the install
package.  WAY easier and not only did it install, it actually boots into a Xen
kernel!  :)  Might not sound like much of an accomplishment to others, but
it''s light years ahead of where I''ve been stuck.  I did an
install of Squeeze RC1 with the base system only and then used apt-get to
install ssh and then xen-linux-system-2.6.32-5-xen-amd64 (I didn''t
install xen-qemu-dm-4.0 because my processor doesn''t support hardware
virtualization; part of why I chose Xen over KVM).  It all worked like a charm. 
No errors on install and the reboot brought me into a Xen kernel with no errors.
 
Now, I''m hoping you or someone on the list can help me with a new
difficulty.  I can''t get xend to start.  I''ve researched
several of what looked like key phrases in the error output, but most of the
similar errors are either several years old and relate to Xen 3 and, for one
reason or another, don''t look applicable to my circumstances OR are
rooted in not having a Xen kernel started up which I have confirmed I have. 
Does anyone have any suggestions on how to troubleshoot based upon the output
below?  I have looked through dmesg, messages and kern.log (the /var/log/xen
directory is empty as is /var/log/pycentral.log) and I can''t seem to
find anything that stands out.
 
----------
root@xenhost:~# uname -a
Linux xenhost 2.6.32-5-xen-amd64 #1 SMP Wed Jan 12 05:46:49 UTC 2011 x86_64
GNU/Linux
root@xenhost:~# xend start
WARNING!  Can''t find hypervisor information in sysfs!
ERROR Internal error: Could not obtain handle on privileged command interface (2
= No such file or directory)
Traceback (most recent call last):
  File "/usr/lib/xen-default/bin/xend", line 38, in <module>
    from xen.xend.server import SrvDaemon
  File "/usr/lib/xen-4.0/lib/python/xen/xend/server/SrvDaemon.py",
line 26, in <module>
    import relocate
  File "/usr/lib/xen-4.0/lib/python/xen/xend/server/relocate.py", line
28, in <module>
    from xen.xend import XendDomain
  File "/usr/lib/xen-4.0/lib/python/xen/xend/XendDomain.py", line 36,
in <module>
    from xen.xend import XendOptions, XendCheckpoint, XendDomainInfo
  File "/usr/lib/xen-4.0/lib/python/xen/xend/XendCheckpoint.py", line
20, in <module>
    from xen.xend import balloon, sxp, image
  File "/usr/lib/xen-4.0/lib/python/xen/xend/image.py", line 46, in
<module>
    xc = xen.lowlevel.xc.xc()
xen.lowlevel.xc.Error: (1, ''Internal error'', ''Could
not obtain handle on privileged command interface (2 = No such file or
directory)'')
root@xenhost:~#

 
----------
 
Thanks in advance for any suggestions,
 
Scott

 > Date: Mon, 10 Jan 2011 10:26:40 +0000
> From: mark@campbell-lange.net
> To: sawozny@hotmail.com
> CC: vchampion@gmail.com; xen-users@lists.xensource.com
> Subject: Re: [Xen-users] (no subject)
> 
> 
> On Sun, Jan 09, 2011 at 11:37:18PM +0000, Scott A. Wozny wrote:
> > 
> > Hi Mark,
> > 
> > 2 main reasons. The secondary reason is that I''ve had poor
luck with pre-compiled Xen packages (I haven''t tried it on this distro,
but I wasn''t even able to get the live CD to work), but the primary
reason is that I need to use Xen 4 (need to be able to do guest disk resize
without shutting the guest down) and I prefer to do it on Ubuntu for which there
is no Xen 4 package. The reason I''m here asking about Xen 3 is because
I was getting so frustrated trying to get Xen 4 to compile that I thought
perhaps it was too new and a more mature code base like Xen 3 might compile and
install properly for me. Once I got that to work I was going to take what I had
learned and go back to my original Xen 4 plan, hopefully with knowledge that
would help me get that to work. However, now that I realize I can''t get
Xen 3 to compile and work properly on this box either, I''ve been
thinking I have a hardware compatibility problem which is why I posted to this
forum asking for any tips and tricks people could share on tracking down whether
there really was a hardware compatibility problem here and from there how to fix
it. Primarily this is a learning exercise for me so I can eventually get back to
my original goal.
> > 
> > If you have any suggestions on how to get there, I''m
definitely interested in hearing your thoughts.
> 
> I run a load of servers on Debian squeeze, which uses xen 4.0.1 at
> present and works pretty well (had some issues with vt-d stuff..).
> Extremely simply setup, you just have to change the order in
> /etc/grub.d/ to get xen to boot by default.
> 
> Packages that should give you everything you need:
> 
> xen-linux-system-2.6.32-5-xen-amd64
> xen-qemu-dm-4.0 (this for hvm)
> 
> Regards,
> Mark
> 
> > 
> > Thanks,
> > 
> > Scott
> > 
> > 
> > 
> > CC: vchampion@gmail.com; xen-users@lists.xensource.com
> > From: mark@campbell-lange.net
> > Subject: Re: [Xen-users] (no subject)
> > Date: Sun, 9 Jan 2011 23:18:18 +0000
> > To: sawozny@hotmail.com
> > 
> > 
> > 
> > 
> > 
> > On 9 Jan 2011, at 21:11, "Scott A. Wozny"
<sawozny@hotmail.com> wrote:
> > 
> > 
> > 
> > 
> > First of all, sorry about the lack of a subject on the email.
I''m usually better about that stuff.
> > 
> > Anyway, the boot sequence goes by pretty fast, but here is the results
of booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built
per the instructions found at
http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/
:
> > 
> > 
> > 
> > 
> > Why are you compiling from source with debian? Just install the
xen-linux-system packages.
> > 
> > Regards,
> > Mark
> > 
> > 
> > 
> > Grub Entry:
> > root (hd0,0)
> > kernel /xen-3.4.3.gz
> > module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro
console=tty0
> > module /initrd.img-2.6.18.8-xen
> > 
> > 
> > Boot results:
> > 
> > 
> > Booting ''Xen 3.4.3 / Debian GNU/Linux, kernel
2.6.18.8-xen''
> > 
> > 
> > root (hd0,0)
> > Filesystem type is extfs2, partition type 0x83
> > kernel /xen-3.4.3.gz
> > [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078,
entry=0x100000]
> > 
> > module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro
console=tty0
> > [Multiboot-module @0x298000, 0x7412d8 bytes]
> > module /initrd.img-2.6.18.8-xen
> > [Multiboot-module @0x9d (this line displays to varying lengths each
time, but it goes by so fast I can''t get the rest of it before the
machine reboots)
> > 
> > 
> > 
> > 
> > A different xen kernel also showed up in my grub that doesn''t
reboot, but also doesn''t boot properly. Here are the results of that if
it helps:
> > 
> > 
> > Grub entry:
> > root (hd0,0)
> > kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> > initrd /initrd.img-2.6.18.8-xen
> > 
> > 
> > Boot results:
> > 
> > 
> > Booting ''Debian GNU/Linux, kernel 2.6.18.8-xen''
> > 
> > 
> > root (hd0,0)
> > Filesystem type is extfs2, partition type 0x83
> > kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> > 
> > 
> > Error 13: Invalid or unsupported executable format
> > 
> > 
> > Press any key to continue...
> > 
> > Here are the dmesg file contents once I booted back into the original
kernel built as part of the Debian 5.0.7 install (if you can recommend any good
resources on interpreting dmesg output I''d appreciate it; in the
meantime I''ll start with Google; also, there was a TV card and modem in
the machine that an earlier version of the dmesg file was complaining about
compatibility; I don''t need either so I''ve pulled them out of
the machine and these are the results of the machine booting without them, but
do you think I should do a full reinstall now that they''re gone?):
> > 
> > [ 0.000000] Initializing cgroup subsys cpuset
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Thu Nov 25 04:30:55 UTC 2010
> > [ 0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> > [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
> > [ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
> > [ 0.000000] BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
> > [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200
used
> > [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of
3200 used
> > [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries
of 3200 used
> > [ 0.000000] max_pfn_mapped = 2293760
> > [ 0.000000] init_memory_mapping
> > [ 0.000000] DMI present.
> > [ 0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM)
> > [ 0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717
MSFT 97)
> > [ 0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1 8A7G1 8A7G1-C0 4 INTL
20051117)
> > [ 0.000000] ACPI: FACS CFFAE000, 0040
> > [ 0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG 20090717 MSFT
97)
> > [ 0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717
MSFT 97)
> > [ 0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT 20090717 MSFT
97)
> > [ 0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717
MSFT 97)
> > [ 0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS NVHDCP 20090717 MSFT
97)
> > [ 0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm CpuPm 12 INTL
20051117)
> > [ 0.000000] No NUMA configuration found
> > [ 0.000000] Faking a node at 0000000000000000-0000000230000000
> > [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200
used
> > [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of
3200 used
> > [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries
of 3200 used
> > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
> > [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
> > [ 0.000000] bootmap [0000000000017000 - 000000000005cfff] pages 46
> > [ 0.000000] early res: 0 [0-fff] BIOS data page
> > [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
> > [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
> > [ 0.000000] early res: 3 [378c2000-37fef99a] RAMDISK
> > [ 0.000000] early res: 4 [9bc00-fffff] BIOS reserved
> > [ 0.000000] early res: 5 [8000-11fff] PGTABLE
> > [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD ->
[ffff810001200000-ffff810003ffffff] on node 0
> > [ 0.000000] [ffffe20003800000-ffffe20007bfffff] PMD ->
[ffff81000c000000-ffff8100103fffff] on node 0
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0 -> 4096
> > [ 0.000000] DMA32 4096 -> 1048576
> > [ 0.000000] Normal 1048576 -> 2293760
> > [ 0.000000] Movable zone start PFN for each node
> > [ 0.000000] early_node_map[3] active PFN ranges
> > [ 0.000000] 0: 0 -> 155
> > [ 0.000000] 0: 256 -> 851872
> > [ 0.000000] 0: 1048576 -> 2293760
> > [ 0.000000] On node 0 totalpages: 2096955
> > [ 0.000000] DMA zone: 56 pages used for memmap
> > [ 0.000000] DMA zone: 1256 pages reserved
> > [ 0.000000] DMA zone: 2683 pages, LIFO batch:0
> > [ 0.000000] DMA32 zone: 14280 pages used for memmap
> > [ 0.000000] DMA32 zone: 833496 pages, LIFO batch:31
> > [ 0.000000] Normal zone: 17024 pages used for memmap
> > [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
> > [ 0.000000] Movable zone: 0 pages used for memmap
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> > [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI
0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high
edge)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high
edge)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] ACPI: IRQ14 used by override.
> > [ 0.000000] ACPI: IRQ15 used by override.
> > [ 0.000000] Setting APIC routing to flat
> > [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] PM: Registered nosave memory: 000000000009b000 -
000000000009c000
> > [ 0.000000] PM: Registered nosave memory: 000000000009c000 -
00000000000a0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
> > [ 0.000000] PM: Registered nosave memory: 00000000cffa0000 -
00000000cffae000
> > [ 0.000000] PM: Registered nosave memory: 00000000cffae000 -
00000000cfff0000
> > [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 -
00000000d0000000
> > [ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000fec00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
> > [ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fee00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
> > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000fff00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
> > [ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
> > [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> > [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
> > [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2064339
> > [ 0.000000] Policy zone: Normal
> > [ 0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro
quiet
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> > [ 0.000000] TSC calibrated against PM_TIMER
> > [ 0.000000] time.c: Detected 2333.293 MHz processor.
> > [ 0.004000] spurious 8259A interrupt: IRQ7.
> > [ 0.004000] Console: colour VGA+ 80x25
> > [ 0.004000] console [tty0] enabled
> > [ 0.004000] Checking aperture...
> > [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
> > [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
> > [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > [ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
> > [ 0.004000] Memory: 8192680k/9175040k available (2229k kernel code,
195140k reserved, 1084k data, 392k init)
> > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> > [ 0.004000] hpet clockevent registered
> > [ 0.083840] Calibrating delay using timer specific routine.. 4671.46
BogoMIPS (lpj=9342927)
> > [ 0.083878] Security Framework initialized
> > [ 0.083884] SELinux: Disabled at boot.
> > [ 0.083887] Capability LSM initialized
> > [ 0.084005] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
> > [ 0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> > [ 0.090266] Mount-cache hash table entries: 256
> > [ 0.090428] Initializing cgroup subsys ns
> > [ 0.090433] Initializing cgroup subsys cpuacct
> > [ 0.090436] Initializing cgroup subsys devices
> > [ 0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.090459] CPU: L2 cache: 2048K
> > [ 0.090461] CPU 0/0 -> Node 0
> > [ 0.090462] CPU: Physical Processor ID: 0
> > [ 0.090463] CPU: Processor Core ID: 0
> > [ 0.090471] CPU0: Thermal monitoring enabled (TM2)
> > [ 0.090472] using mwait in idle threads.
> > [ 0.091391] ACPI: Core revision 20080321
> > [ 0.142651] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.142654] Using local APIC timer interrupts.
> > [ 0.148009] APIC timer calibration result 20833012
> > [ 0.148009] Detected 20.833 MHz APIC timer.
> > [ 0.148009] Booting processor 1/1 ip 6000
> > [ 0.156009] Initializing CPU#1
> > [ 0.156009] Calibrating delay using timer specific routine.. 4666.64
BogoMIPS (lpj=9333287)
> > [ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.156009] CPU: L2 cache: 2048K
> > [ 0.156009] CPU 1/1 -> Node 0
> > [ 0.156009] CPU: Physical Processor ID: 0
> > [ 0.156009] CPU: Processor Core ID: 1
> > [ 0.156009] CPU1: Thermal monitoring enabled (TM2)
> > [ 0.236014] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> > [ 0.240015] Booting processor 2/2 ip 6000
> > [ 0.248015] Initializing CPU#2
> > [ 0.248015] Calibrating delay using timer specific routine.. 4666.71
BogoMIPS (lpj=9333433)
> > [ 0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.248015] CPU: L2 cache: 2048K
> > [ 0.248015] CPU 2/2 -> Node 0
> > [ 0.248015] CPU: Physical Processor ID: 0
> > [ 0.248015] CPU: Processor Core ID: 2
> > [ 0.248015] CPU2: Thermal monitoring enabled (TM2)
> > [ 0.327750] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> > [ 0.332020] Booting processor 3/3 ip 6000
> > [ 0.340021] Initializing CPU#3
> > [ 0.340021] Calibrating delay using timer specific routine.. 4666.67
BogoMIPS (lpj=9333345)
> > [ 0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.340021] CPU: L2 cache: 2048K
> > [ 0.340021] CPU 3/3 -> Node 0
> > [ 0.340021] CPU: Physical Processor ID: 0
> > [ 0.340021] CPU: Processor Core ID: 3
> > [ 0.340021] CPU3: Thermal monitoring enabled (TM2)
> > [ 0.419670] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> > [ 0.424026] Brought up 4 CPUs
> > [ 0.424026] Total of 4 processors activated (18671.49 BogoMIPS).
> > [ 0.424026] CPU0 attaching sched-domain:
> > [ 0.424026] domain 0: span 0-1
> > [ 0.424026] groups: 0 1
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 0-1 2-3
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU1 attaching sched-domain:
> > [ 0.424026] domain 0: span 0-1
> > [ 0.424026] groups: 1 0
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 0-1 2-3
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU2 attaching sched-domain:
> > [ 0.424026] domain 0: span 2-3
> > [ 0.424026] groups: 2 3
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 2-3 0-1
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU3 attaching sched-domain:
> > [ 0.424026] domain 0: span 2-3
> > [ 0.424026] groups: 3 2
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 2-3 0-1
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] net_namespace: 1224 bytes
> > [ 0.424026] Booting paravirtualized kernel on bare hardware
> > [ 0.424026] NET: Registered protocol family 16
> > [ 0.424026] ACPI: bus type pci registered
> > [ 0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0
- 255
> > [ 0.424026] PCI: Not using MMCONFIG.
> > [ 0.424026] PCI: Using configuration type 1 for base access
> > [ 0.428602] ACPI: EC: Look up EC in DSDT
> > [ 0.447520] ACPI: Interpreter enabled
> > [ 0.447523] ACPI: (supports S0 S1 S3 S4 S5)
> > [ 0.447539] ACPI: Using IOAPIC for interrupt routing
> > [ 0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0
- 255
> > [ 0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
> > [ 0.470851] PCI: Using MMCONFIG at e0000000 - efffffff
> > [ 0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > [ 0.500771] PCI: Transparent bridge - 0000:00:09.0
> > [ 0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > [ 0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
> > [ 0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
> > [ 0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> > [ 0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> > [ 0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> > [ 0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7
> > [ 0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
> > [ 0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
> > [ 0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> > [ 0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
> > [ 0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
> > [ 0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
> > [ 0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
> > [ 0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> > [ 0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
> > [ 0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
> > [ 0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
> > [ 0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
> > [ 0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
> > [ 0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
> > [ 0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
> > [ 0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay
> > [ 0.540903] pnp: PnP ACPI init
> > [ 0.540903] ACPI: bus type pnp registered
> > [ 0.540903] pnp 00:00: parse allocated resources
> > [ 0.540903] pnp 00:00: add io 0xcf8-0xcff flags 0x1
> > [ 0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> > [ 0.540903] pnp 00:01: parse allocated resources
> > [ 0.540903] pnp 00:01: add dma 4 flags 0x4
> > [ 0.540903] pnp 00:01: add io 0x0-0xf flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x81-0x83 flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x87-0x87 flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x89-0x8b flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x8f-0x8f flags 0x1
> > [ 0.540903] pnp 00:01: add io 0xc0-0xdf flags 0x1
> > [ 0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> > [ 0.540926] pnp 00:02: parse allocated resources
> > [ 0.540930] pnp 00:02: add io 0x61-0x61 flags 0x1
> > [ 0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
> > [ 0.544903] pnp 00:03: parse allocated resources
> > [ 0.544903] pnp 00:03: add io 0xf0-0xff flags 0x1
> > [ 0.544903] pnp 00:03: add irq 13 flags 0x1
> > [ 0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> > [ 0.544903] pnp 00:04: parse allocated resources
> > [ 0.544903] pnp 00:04: add io 0x10-0x1f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x22-0x3f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x44-0x4d flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x50-0x5f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x62-0x63 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x65-0x6f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x72-0x7f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x80-0x80 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x84-0x86 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x88-0x88 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x8c-0x8e flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x90-0x9f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0xa2-0xbf flags 0x1
> > [ 0.544903] pnp 00:04: add io 0xe0-0xef flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x800-0x80f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4000-0x407f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4080-0x40ff flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4400-0x447f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4480-0x44ff flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4800-0x487f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4880-0x48ff flags 0x1
> > [ 0.544903] pnp 00:04: add mem 0x0-0xffffffffffffffff flags 0x10000000
> > [ 0.544903] pnp 00:04: add mem 0xfefe2000-0xfefe3fff flags 0x0
> > [ 0.544903] pnp 00:04: add mem 0xfefe1000-0xfefe1fff flags 0x0
> > [ 0.544903] pnp 00:04: add mem 0xfee01000-0xfeefffff flags 0x0
> > [ 0.544903] pnp 00:04: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.544903] pnp 00:05: parse allocated resources
> > [ 0.544903] pnp 00:05: add mem 0xfed00000-0xfed00fff flags 0x1
> > [ 0.544903] pnp 00:05: add irq 8 flags 0x1
> > [ 0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
> > [ 0.544903] pnp 00:06: parse allocated resources
> > [ 0.544903] pnp 00:06: add io 0x70-0x71 flags 0x1
> > [ 0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> > [ 0.544903] pnp 00:07: parse allocated resources
> > [ 0.544903] pnp 00:07: add mem 0xfec00000-0xfec00fff flags 0x0
> > [ 0.544903] pnp 00:07: add mem 0xfee00000-0xfee00fff flags 0x0
> > [ 0.544903] pnp 00:07: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.544903] pnp 00:08: parse allocated resources
> > [ 0.544903] pnp 00:08: add io 0x60-0x60 flags 0x1
> > [ 0.544903] pnp 00:08: add io 0x64-0x64 flags 0x1
> > [ 0.544903] pnp 00:08: add irq 1 flags 0x1
> > [ 0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
> > [ 0.548903] pnp 00:09: parse allocated resources
> > [ 0.548903] pnp 00:09: add irq 12 flags 0x1
> > [ 0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
(active)
> > [ 0.548903] pnp 00:0a: parse allocated resources
> > [ 0.548903] pnp 00:0a: add io 0x0-0xffffffffffffffff flags 0x10000001
> > [ 0.548903] pnp 00:0a: add io 0xa00-0xa0f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa10-0xa1f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa20-0xa2f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa30-0xa3f flags 0x1
> > [ 0.548903] pnp 00:0a: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.548903] pnp 00:0b: parse allocated resources
> > [ 0.548903] pnp 00:0b: add mem 0xe0000000-0xefffffff flags 0x0
> > [ 0.548903] pnp 00:0b: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.548903] pnp 00:0c: parse allocated resources
> > [ 0.548903] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
> > [ 0.548903] pnp 00:0c: add mem 0xc0000-0xcffff flags 0x0
> > [ 0.548903] pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0
> > [ 0.548903] pnp 00:0c: add mem 0x100000-0xcfffffff flags 0x1
> > [ 0.548903] pnp 00:0c: add mem 0xfec00000-0xffffffff flags 0x0
> > [ 0.548903] pnp 00:0c: PNP0c01: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [ 0.554581] pnp: PnP ACPI: found 13 devices
> > [ 0.554581] ACPI: ACPI bus type pnp unregistered
> > [ 0.554581] usbcore: registered new interface driver usbfs
> > [ 0.554581] usbcore: registered new interface driver hub
> > [ 0.554581] usbcore: registered new device driver usb
> > [ 0.554581] PCI: Using ACPI for IRQ routing
> > [ 0.571245] PCI-GART: No AMD northbridge found.
> > [ 0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
> > [ 0.571257] hpet0: 4 64-bit timers, 25000000 Hz
> > [ 0.575216] ACPI: RTC can wake from S4
> > [ 0.578101] Switched to high resolution mode on CPU 0
> > [ 0.578546] Switched to high resolution mode on CPU 1
> > [ 0.578551] Switched to high resolution mode on CPU 3
> > [ 0.579207] Switched to high resolution mode on CPU 2
> > [ 0.590046] pnp: the driver ''system'' has been
registered
> > [ 0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
> > [ 0.590062] system 00:04: ioport range 0x800-0x80f has been reserved
> > [ 0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved
> > [ 0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved
> > [ 0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved
> > [ 0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved
> > [ 0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved
> > [ 0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved
> > [ 0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been
reserved
> > [ 0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been
reserved
> > [ 0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been
reserved
> > [ 0.590087] system 00:04: driver attached
> > [ 0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not
be reserved
> > [ 0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not
be reserved
> > [ 0.590099] system 00:07: driver attached
> > [ 0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved
> > [ 0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved
> > [ 0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved
> > [ 0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved
> > [ 0.590115] system 00:0a: driver attached
> > [ 0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
> > [ 0.590122] system 00:0b: driver attached
> > [ 0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be
reserved
> > [ 0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been
reserved
> > [ 0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
> > [ 0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
> > [ 0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not
be reserved
> > [ 0.590140] system 00:0c: driver attached
> > [ 0.593429] PCI: Bridge: 0000:00:09.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:0c.0
> > [ 0.593429] IO window: e000-efff
> > [ 0.593429] MEM window: 0xfa000000-0xfeafffff
> > [ 0.593429] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
> > [ 0.593429] PCI: Bridge: 0000:00:15.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:16.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:17.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: 0xfeb00000-0xfebfffff
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:18.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64
> > [ 0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
> > [ 0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0]
-> GSI 23 (level, low) -> IRQ 23
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3]
-> GSI 22 (level, low) -> IRQ 22
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4]
-> GSI 21 (level, low) -> IRQ 21
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5]
-> GSI 20 (level, low) -> IRQ 20
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6]
-> GSI 23 (level, low) -> IRQ 23
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64
> > [ 0.593430] NET: Registered protocol family 2
> > [ 0.642185] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
> > [ 0.644364] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
> > [ 0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
> > [ 0.649453] TCP: Hash tables configured (established 524288 bind
65536)
> > [ 0.649456] TCP reno registered
> > [ 0.658058] NET: Registered protocol family 1
> > [ 0.658160] checking if image is initramfs... it is
> > [ 1.186404] Freeing initrd memory: 7350k freed
> > [ 1.191507] audit: initializing netlink socket (disabled)
> > [ 1.191507] type=2000 audit(1294606162.172:1): initialized
> > [ 1.201065] Total HugeTLB memory allocated, 0
> > [ 1.201065] VFS: Disk quotas dquot_6.5.1
> > [ 1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> > [ 1.201065] msgmni has been set to 16015
> > [ 1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
> > [ 1.201065] io scheduler noop registered
> > [ 1.201065] io scheduler anticipatory registered
> > [ 1.201065] io scheduler deadline registered
> > [ 1.201065] io scheduler cfq registered (default)
> > [ 1.272051] pci 0000:02:00.0: Boot video device
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:0c.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:15.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:16.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:17.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64
> > [ 1.273122] assign_interrupt_mode Found MSI capability
> > [ 1.273122] Allocate Port Service[0000:00:18.0:pcie00]
> > [ 1.278234] hpet_resources: 0xfed00000 is busy
> > [ 1.278234] Linux agpgart interface v0.103
> > [ 1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
> > [ 1.278234] pnp: the driver ''serial'' has been
registered
> > [ 1.282230] brd: module loaded
> > [ 1.282230] input: Macintosh mouse button emulation as
/class/input/input0
> > [ 1.282230] pnp: the driver ''i8042 kbd'' has been
registered
> > [ 1.282230] i8042 kbd 00:08: driver attached
> > [ 1.282230] pnp: the driver ''i8042 aux'' has been
registered
> > [ 1.282230] i8042 aux 00:09: driver attached
> > [ 1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
> > [ 1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12
> > [ 1.302218] mice: PS/2 mouse device common for all mice
> > [ 1.302218] pnp: the driver ''rtc_cmos'' has been
registered
> > [ 1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> > [ 1.302218] rtc0: alarms up to one year, y3k
> > [ 1.302218] rtc_cmos 00:06: driver attached
> > [ 1.302218] cpuidle: using governor ladder
> > [ 1.302218] cpuidle: using governor menu
> > [ 1.302218] No iBFT detected.
> > [ 1.302563] TCP cubic registered
> > [ 1.302563] NET: Registered protocol family 17
> > [ 1.302563] registered taskstats version 1
> > [ 1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09
20:49:22 UTC (1294606162)
> > [ 1.302563] Freeing unused kernel memory: 392k freed
> > [ 1.326091] input: AT Translated Set 2 keyboard as /class/input/input1
> > [ 1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm P001Ist 11 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:00 is registered as cooling_device0
> > [ 1.379078] ACPI: Processor [P001] (supports 8 throttling states)
> > [ 1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm P002Ist 12 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:01 is registered as cooling_device1
> > [ 1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm P003Ist 12 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:02 is registered as cooling_device2
> > [ 1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm P004Ist 12 INTL
20051117)
> > [ 1.383072] ACPI: ACPI0007:03 is registered as cooling_device3
> > [ 1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0
> > [ 1.383072] ACPI: Thermal Zone [THRM] (33 C)
> > [ 1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
> > [ 1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2]
-> GSI 22 (level, low) -> IRQ 22
> > [ 1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64
> > [ 1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller
> > [ 1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned
bus number 1
> > [ 1.556086] ehci_hcd 0000:00:04.1: debug port 1
> > [ 1.556086] PCI: cache line size of 32 is not supported by device
0000:00:04.1
> > [ 1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00
> > [ 1.556731] ohci_hcd: 2006 August 04 USB 1.1 ''Open''
Host Controller (OHCI) Driver
> > [ 1.560731] No dock devices found.
> > [ 1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
> > [ 1.564968] usb usb1: configuration #1 chosen from 1 choice
> > [ 1.564995] hub 1-0:1.0: USB hub found
> > [ 1.565003] hub 1-0:1.0: 6 ports detected
> > [ 1.568731] SCSI subsystem initialized
> > [ 1.580731] libata version 3.00 loaded.
> > [ 1.673459] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
> > [ 1.673459] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.673459] usb usb1: Product: EHCI Host Controller
> > [ 1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> > [ 1.673459] usb usb1: SerialNumber: 0000:00:04.1
> > [ 1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
> > [ 1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12]
-> GSI 21 (level, low) -> IRQ 21
> > [ 1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64
> > [ 1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller
> > [ 1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned
bus number 2
> > [ 1.673459] ehci_hcd 0000:00:06.1: debug port 1
> > [ 1.673459] PCI: cache line size of 32 is not supported by device
0000:00:06.1
> > [ 1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800
> > [ 1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
> > [ 1.689512] usb usb2: configuration #1 chosen from 1 choice
> > [ 1.689537] hub 2-0:1.0: USB hub found
> > [ 1.689543] hub 2-0:1.0: 6 ports detected
> > [ 1.792316] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
> > [ 1.792319] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.792321] usb usb2: Product: EHCI Host Controller
> > [ 1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> > [ 1.792324] usb usb2: SerialNumber: 0000:00:06.1
> > [ 1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
> > [ 1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0]
-> GSI 20 (level, low) -> IRQ 20
> > [ 1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64
> > [ 1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller
> > [ 1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned
bus number 3
> > [ 1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000
> > [ 1.855515] usb usb3: configuration #1 chosen from 1 choice
> > [ 1.855538] hub 3-0:1.0: USB hub found
> > [ 1.855544] hub 3-0:1.0: 6 ports detected
> > [ 1.957533] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
> > [ 1.957536] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.957538] usb usb3: Product: OHCI Host Controller
> > [ 1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> > [ 1.957541] usb usb3: SerialNumber: 0000:00:04.0
> > [ 1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
> > [ 1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11]
-> GSI 23 (level, low) -> IRQ 23
> > [ 1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64
> > [ 1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller
> > [ 1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned
bus number 4
> > [ 1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000
> > [ 2.015521] usb usb4: configuration #1 chosen from 1 choice
> > [ 2.015543] hub 4-0:1.0: USB hub found
> > [ 2.015549] hub 4-0:1.0: 6 ports detected
> > [ 2.105477] usb 2-3: new high speed USB device using ehci_hcd and
address 2
> > [ 2.117542] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
> > [ 2.117545] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 2.117547] usb usb4: Product: OHCI Host Controller
> > [ 2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> > [ 2.117550] usb usb4: SerialNumber: 0000:00:06.0
> > [ 2.121473] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
> > [ 2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
> > [ 2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC]
-> GSI 22 (level, low) -> IRQ 22
> > [ 2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> > [ 2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83
has an invalid bInterval 30, changing to 8
> > [ 2.275186] usb 2-3: configuration #1 chosen from 1 choice
> > [ 2.278384] usb 2-3: New USB device found, idVendor=0bda,
idProduct=0152
> > [ 2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> > [ 2.278384] usb 2-3: Product: USB2.0-CRW
> > [ 2.278384] usb 2-3: Manufacturer: Generic
> > [ 2.278384] usb 2-3: SerialNumber: 20060413092100000
> > [ 2.300419] Initializing USB Mass Storage driver...
> > [ 2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3,
addr 00:22:68:3a:6a:b7
> > [ 2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq
gbit lnktim msi desc-v3
> > [ 2.801910] ahci 0000:00:0b.0: version 3.0
> > [ 2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
> > [ 2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0]
-> GSI 21 (level, low) -> IRQ 21
> > [ 2.950553] usb 3-4: new low speed USB device using ohci_hcd and
address 2
> > [ 3.169044] usb 3-4: configuration #1 chosen from 1 choice
> > [ 3.169044] usb 3-4: New USB device found, idVendor=04eb,
idProduct=e030
> > [ 3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> > [ 3.169044] usb 3-4: Product: Media Center Interface
> > [ 3.169044] usb 3-4: Manufacturer: Device
> > [ 3.517035] usb 4-4: new low speed USB device using ohci_hcd and
address 2
> > [ 3.905098] usb 4-4: configuration #1 chosen from 1 choice
> > [ 3.922229] usb 4-4: New USB device found, idVendor=04eb,
idProduct=e033
> > [ 3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> > [ 3.922233] usb 4-4: Product: eHome Infrared Transceiver
> > [ 3.922235] usb 4-4: Manufacturer: Northstar System Corp.
> > [ 3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000
> > [ 3.922229] usbcore: registered new interface driver hiddev
> > [ 3.925096] scsi0 : SCSI emulation for USB Mass Storage devices
> > [ 3.925096] usb-storage: device found at 2
> > [ 3.925096] usb-storage: waiting for device to settle before scanning
> > [ 4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl RAID mode
> > [ 4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum
part
> > [ 4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64
> > [ 4.090205] scsi1 : ahci
> > [ 4.090703] scsi2 : ahci
> > [ 4.090703] scsi3 : ahci
> > [ 4.090703] scsi4 : ahci
> > [ 4.090703] scsi5 : ahci
> > [ 4.090703] scsi6 : ahci
> > [ 4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72100 irq 1274
> > [ 4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72180 irq 1274
> > [ 4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72200 irq 1274
> > [ 4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72280 irq 1274
> > [ 4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72300 irq 1274
> > [ 4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72380 irq 1274
> > [ 4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [ 4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max
UDMA/133
> > [ 4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth
31/32)
> > [ 4.659284] ata1.00: configured for UDMA/133
> > [ 5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [ 5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
> > [ 5.142984] ata2.00: configured for UDMA/100
> > [ 5.467117] ata3: SATA link down (SStatus 0 SControl 300)
> > [ 6.082425] ata4: SATA link down (SStatus 0 SControl 300)
> > [ 6.405773] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 6.725774] ata6: SATA link down (SStatus 0 SControl 300)
> > [ 7.115290] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ:
0 ANSI: 5
> > [ 7.115290] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH15F EG00 PQ: 0
ANSI: 5
> > [ 7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19
> > [ 7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A]
-> GSI 19 (level, low) -> IRQ 19
> > [ 7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64
> > [ 7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4]
> > [ 7.467156] Driver ''sd'' needs updating - please use
bus_type methods
> > [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> > [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off
> > [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn''t support DPO or FUA
> > [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> > [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off
> > [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn''t support DPO or FUA
> > [ 7.467156] sda:<4>Driver ''sr'' needs updating
- please use bus_type methods
> > [ 7.484514] sda1 sda2
> > [ 7.484644] sd 1:0:0:0: [sda] Attached SCSI disk
> > [ 7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
> > [ 7.712076] Uniform CD-ROM driver Revision: 3.20
> > [ 7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0
> > [ 7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0
> > [ 7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5
> > [ 9.251645] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00995efa00016c20]
> > [ 11.721065] usb-storage: device scan complete
> > [ 11.721065] scsi 0:0:0:0: Direct-Access Generic- Compact Flash 1.00
PQ: 0 ANSI: 0 CCS
> > [ 12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk
> > [ 12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0
> > [ 17.887389] usbhid: timeout initializing reports
> > [ 17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic
USB2.0-CRW] on usb-0000:00:06.1-3
> > [ 17.887477] usbcore: registered new interface driver usb-storage
> > [ 17.887480] USB Mass Storage support registered.
> > [ 18.452265] input: Device Media Center Interface as
/class/input/input2
> > [ 18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device
Media Center Interface] on usb-0000:00:04.0-4
> > [ 18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media
Center Interface] on usb-0000:00:04.0-4
> > [ 18.483626] usbcore: registered new interface driver usbhid
> > [ 18.483629] usbhid: v2.6:USB HID core driver
> > [ 18.559424] device-mapper: uevent: version 1.0.3
> > [ 18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
initialised: dm-devel@redhat.com
> > [ 18.682017] PM: Starting manual resume from disk
> > [ 18.753394] kjournald starting. Commit interval 5 seconds
> > [ 18.753394] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 19.766553] udevd version 125 started
> > [ 20.072797] input: Power Button (FF) as /class/input/input3
> > [ 20.165593] ACPI: Power Button (FF) [PWRF]
> > [ 20.167337] input: Power Button (CM) as /class/input/input4
> > [ 20.231290] ACPI: Power Button (CM) [PWRB]
> > [ 20.233467] ACPI: WMI: Mapper loaded
> > [ 20.381495] input: PC Speaker as /class/input/input5
> > [ 20.398514] Error: Driver ''pcspkr'' is already
registered, aborting...
> > [ 20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
> > [ 20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA]
-> GSI 20 (level, low) -> IRQ 20
> > [ 20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64
> > [ 22.555585] EXT3 FS on dm-0, internal journal
> > [ 23.159449] loop: module loaded
> > [ 23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1.
Priority:-1 extents:1 across:24023032k
> > xenhost:~#
> > 
> > 
> > 
> > 
> > 
> > From: vchampion@gmail.com
> > Date: Sun, 9 Jan 2011 10:13:30 +0300
> > Subject: Re: [Xen-users] (no subject)
> > To: sawozny@hotmail.com
> > CC: Xen-users@lists.xensource.com
> > 
> > Hi!
> > 
> > 
> > On which state the loading of xen kernel stops? What are you seeing on
display in that moment?
> > Can you put dmesg here?
> > 
> > 
> > 2011/1/9 Scott A. Wozny <sawozny@hotmail.com>
> > 
> > 
> > OK, so after several weeks of trying to get various versions of Xen
running of various distributions, I''m starting to wonder if
I''ve got a hardware compatibility problem and as the system never
really boots with the Xen kernel I''ve got no log files to tell me where
the problem is. I was wondering if there''s a way to compile from source
with debug turned on, particularly for early boot problems, and where those logs
get stored.
> > 
> > In my research, it seems like everyone who has had problems getting
Xen running has fixed it through errors reported during the compile process and
correcting source files to match but I''ve been poring through the
thousands of lines of output produced by the various makes I''ve been
doing in different distro and source combinations and I can''t find
anything that says "You have a problem here". They just compile
cleanly and then don''t boot.
> > 
> > Any and all suggestions would be greatly appreciated.
> > 
> > Thanks,
> > 
> > Scott
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> > 
> > 
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users  		 	   		  

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Mark Pryor

2011-Jan-16 18:13 UTC

head link

RE: [Xen-users] (no subject)

--- On Sun, 1/16/11, Scott A. Wozny <sawozny@hotmail.com> wrote:

From: Scott A. Wozny <sawozny@hotmail.com>
Subject: RE: [Xen-users] (no subject)
To: mark@campbell-lange.net
Cc: vchampion@gmail.com, "Xen Users"
<xen-users@lists.xensource.com>
Date: Sunday, January 16, 2011, 9:17 AM




Hi Mark,

 

First of all, thanks for the suggestion of giving Squeeze a try with the install
package.  WAY easier and not only did it install, it actually boots into a Xen
kernel!  :)  Might not sound like much of an accomplishment to others, but
it''s light years ahead of where I''ve been stuck.  I did an
install of Squeeze RC1 with the base system only and then used apt-get to
install ssh and then xen-linux-system-2.6.32-5-xen-amd64 (I didn''t
install xen-qemu-dm-4.0 because my processor doesn''t support hardware
virtualization; part of why I chose Xen over KVM).  It all worked like a charm. 
No errors on install and the reboot brought me into a Xen kernel with no errors.

 

Now, I''m hoping you or someone on the list can help me with a new
difficulty.  I can''t get xend to start.  I''ve researched
several of what looked like key phrases in the error output, but most of the
similar errors are either several years old and relate to Xen 3 and, for one
reason or another, don''t look applicable to my circumstances OR are
rooted in not having a Xen kernel started up which I have confirmed I have. 
Does anyone have any suggestions on how to troubleshoot based upon the output
below?  I have looked through dmesg, messages and kern.log (the /var/log/xen
directory is empty as is /var/log/pycentral.log) and I can''t seem to
find anything that stands out.
----------------

To verify your xen package set:

#dpkg -l | grep -i xen

ii  libxenstore3.0                          4.0.1-1                     Xenstore
communications library for Xen
ii  linux-image-2.6.32-5-xen-amd64          2.6.32-29                   Linux
2.6.32 for 64-bit PCs, Xen dom0 support
ii  linux-image-xen-amd64                   2.6.32+28                   Linux
for 64-bit PCs (meta-package), Xen dom0 support, Xen dom0 support
ii  xen-hypervisor-4.0-amd64                4.0.1-1                     The Xen
Hypervisor on AMD64
ii  xen-linux-system-2.6.32-5-xen-amd64     2.6.32-29                   Xen
system with Linux 2.6.32 on 64-bit PCs (meta-package)
ii  xen-qemu-dm-4.0                         4.0.1-2                     Xen Qemu
Device Model virtual machine hardware emulator
ii  xen-utils-4.0                           4.0.1-1                     XEN
administrative tools
ii  xen-utils-common                        4.0.0-1                     XEN
administrative tools - common files
ii  xenstore-utils                          4.0.1-1                     Xenstore
utilities for Xen

--------------
Check your mounts, and see if /proc/xen is mounted, if not execute the line
below

#echo ''none /proc/xen xenfs defaults 0 0'' >> /etc/fstab

---------------
to setup your xen init scripts

#dpkg-reconfigure xen-utils-common
 

-----------
While xend is in your path, you want to start xend via init scripts

#/etc/init.d/xend restart

-- 
Mark


      

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Scott A. Wozny

2011-Jan-16 21:06 UTC

head link

RE: [Xen-users] (no subject)

Hi Mark,
 
Well, I don''t have all the installed packages you do, but it''s
close:
 
root@xenhost:~# dpkg -l | grep -i xen
ii  libxenstore3.0                      4.0.1-1                     Xenstore
communications library for Xen
ii  linux-image-2.6.32-5-xen-amd64      2.6.32-30                   Linux 2.6.32
for 64-bit PCs, Xen dom0 support
ii  xen-hypervisor-4.0-amd64            4.0.1-1                     The Xen
Hypervisor on AMD64
ii  xen-linux-system-2.6.32-5-xen-amd64 2.6.32-30                   Xen system
with Linux 2.6.32 on 64-bit PCs (meta-package)
ii  xen-utils-4.0                       4.0.1-1                     XEN
administrative tools
ii  xen-utils-common                    4.0.0-1                     XEN
administrative tools - common files
ii  xenstore-utils                      4.0.1-1                     Xenstore
utilities for Xen

Looks like I''m missing:
ii linux-image-xen-amd64 2.6.32+28 Linux for 64-bit PCs (meta-package), Xen dom0
support, Xen dom0 support
ii xen-qemu-dm-4.0 4.0.1-2 Xen Qemu Device Model virtual machine hardware
emulator
 
The second one isn''t a surprise as I didn''t install Qemu due
to the fact the processesor on my machine doesn''t support hardware
virtulaization, but maybe something is wrong that I don''t have the
first one. I installed it myself with apt-get and now I''ve got:
 
root@xenhost:~# dpkg -l | grep -i xen
ii  libxenstore3.0                          4.0.1-1                     Xenstore
communications library for Xen
ii  linux-image-2.6.32-5-xen-amd64          2.6.32-30                   Linux
2.6.32 for 64-bit PCs, Xen dom0 support
ii  linux-image-xen-amd64                   2.6.32+28                   Linux
for 64-bit PCs (meta-package), Xen dom0 support, Xen dom0 support
ii  xen-hypervisor-4.0-amd64                4.0.1-1                     The Xen
Hypervisor on AMD64
ii  xen-linux-system-2.6.32-5-xen-amd64     2.6.32-30                   Xen
system with Linux 2.6.32 on 64-bit PCs (meta-package)
ii  xen-utils-4.0                           4.0.1-1                     XEN
administrative tools
ii  xen-utils-common                        4.0.0-1                     XEN
administrative tools - common files
ii  xenstore-utils                          4.0.1-1                     Xenstore
utilities for Xen

Just to see, I tried xend start again, but got the same error.
 
Continuing with your instructions, I did an ls -la /proc and there was no xen so
I ran the echo ''none /proc/xen xenfs defaults 0 0'' >>
/etc/fstab command specified, ran dpkg-reconfigure xen-utils-common and (as xend
was already in my path) ran xend restart.  Same error, so I thought a reboot
might be in order.  Unfortunately, even after a reboot, xend would not start
with the same errors as before.
 
I guess my biggest question is, how important is the xen-qemu-dm-4.0 package if
your processor doesn''t support hardware virtualization?  Does it
support other functions for xen and should I install it anyway?
 
Thanks for the suggestions thus far,
 
Scott

 > Date: Sun, 16 Jan 2011 10:13:29 -0800
> From: tlviewer@yahoo.com
> Subject: RE: [Xen-users] (no subject)
> To: sawozny@hotmail.com
> CC: xen-users@lists.xensource.com
> 
> 
> --- On Sun, 1/16/11, Scott A. Wozny <sawozny@hotmail.com> wrote:
> 
> From: Scott A. Wozny <sawozny@hotmail.com>
> Subject: RE: [Xen-users] (no subject)
> To: mark@campbell-lange.net
> Cc: vchampion@gmail.com, "Xen Users"
<xen-users@lists.xensource.com>
> Date: Sunday, January 16, 2011, 9:17 AM
> 
> 
> 
> 
> Hi Mark,
> 
>  
> 
> First of all, thanks for the suggestion of giving Squeeze a try with the
install package.  WAY easier and not only did it install, it actually boots into
a Xen kernel!  :)  Might not sound like much of an accomplishment to others, but
it''s light years ahead of where I''ve been stuck.  I did an
install of Squeeze RC1 with the base system only and then used apt-get to
install ssh and then xen-linux-system-2.6.32-5-xen-amd64 (I didn''t
install xen-qemu-dm-4.0 because my processor doesn''t support hardware
virtualization; part of why I chose Xen over KVM).  It all worked like a charm. 
No errors on install and the reboot brought me into a Xen kernel with no errors.
> 
>  
> 
> Now, I''m hoping you or someone on the list can help me with a new
difficulty.  I can''t get xend to start.  I''ve researched
several of what looked like key phrases in the error output, but most of the
similar errors are either several years old and relate to Xen 3 and, for one
reason or another, don''t look applicable to my circumstances OR are
rooted in not having a Xen kernel started up which I have confirmed I have. 
Does anyone have any suggestions on how to troubleshoot based upon the output
below?  I have looked through dmesg, messages and kern.log (the /var/log/xen
directory is empty as is /var/log/pycentral.log) and I can''t seem to
find anything that stands out.
> ----------------
> 
> To verify your xen package set:
> 
> #dpkg -l | grep -i xen
> 
> ii libxenstore3.0 4.0.1-1 Xenstore communications library for Xen
> ii linux-image-2.6.32-5-xen-amd64 2.6.32-29 Linux 2.6.32 for 64-bit PCs,
Xen dom0 support
> ii linux-image-xen-amd64 2.6.32+28 Linux for 64-bit PCs (meta-package), Xen
dom0 support, Xen dom0 support
> ii xen-hypervisor-4.0-amd64 4.0.1-1 The Xen Hypervisor on AMD64
> ii xen-linux-system-2.6.32-5-xen-amd64 2.6.32-29 Xen system with Linux
2.6.32 on 64-bit PCs (meta-package)
> ii xen-qemu-dm-4.0 4.0.1-2 Xen Qemu Device Model virtual machine hardware
emulator
> ii xen-utils-4.0 4.0.1-1 XEN administrative tools
> ii xen-utils-common 4.0.0-1 XEN administrative tools - common files
> ii xenstore-utils 4.0.1-1 Xenstore utilities for Xen
> 
> --------------
> Check your mounts, and see if /proc/xen is mounted, if not execute the line
below
> 
> #echo ''none /proc/xen xenfs defaults 0 0'' >>
/etc/fstab
> 
> ---------------
> to setup your xen init scripts
> 
> #dpkg-reconfigure xen-utils-common
>  
> 
> -----------
> While xend is in your path, you want to start xend via init scripts
> 
> #/etc/init.d/xend restart
> 
> -- 
> Mark
> 
> 
>  		 	   		  

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Boris Derzhavets

2011-Jan-16 21:38 UTC

head link

RE: [Xen-users] (no subject)

When Dom0 gets loaded, what is output ?

1.   # ls  -l /dev/xen
2.   lsmod | grep xen

Boris.



--- On Sun, 1/16/11, Scott A. Wozny <sawozny@hotmail.com> wrote:

From: Scott A. Wozny <sawozny@hotmail.com>
Subject: RE: [Xen-users] (no subject)
To: mark@campbell-lange.net
Cc: vchampion@gmail.com, "Xen Users"
<xen-users@lists.xensource.com>
Date: Sunday, January 16, 2011, 12:17 PM




Hi Mark,

 

First of all, thanks for the suggestion of giving Squeeze a try with the install
package.  WAY easier and not only did it install, it actually boots into a Xen
kernel!  :)  Might not sound like much of an accomplishment to others, but
it''s light years ahead of where I''ve been stuck.  I did an
install of Squeeze RC1 with the base system only and then used apt-get to
install ssh and then xen-linux-system-2.6.32-5-xen-amd64 (I didn''t
install xen-qemu-dm-4.0 because my processor doesn''t support hardware
virtualization; part of why I chose Xen over KVM).  It all worked like a charm. 
No errors on install and the reboot brought me into a Xen kernel with no errors.

 

Now, I''m hoping you or someone on the list can help me with a new
difficulty.  I can''t get xend to start.  I''ve researched
several of what looked like key phrases in the error output, but most of the
similar errors are either several years old and relate to Xen 3 and, for one
reason or another, don''t look applicable to my circumstances OR are
rooted in not having a Xen kernel started up which I have confirmed I have. 
Does anyone have any suggestions on how to troubleshoot based upon the output
below?  I have looked through dmesg, messages and kern.log (the /var/log/xen
directory is empty as is /var/log/pycentral.log) and I can''t seem to
find anything that stands out.

 

----------

root@xenhost:~# uname -a
Linux xenhost 2.6.32-5-xen-amd64 #1 SMP Wed Jan 12 05:46:49 UTC 2011 x86_64
GNU/Linux
root@xenhost:~# xend start
WARNING!  Can''t find hypervisor information in sysfs!
ERROR Internal error: Could not obtain handle on privileged command interface (2
= No such file or directory)
Traceback (most recent call last):
  File "/usr/lib/xen-default/bin/xend", line 38, in <module>
    from xen.xend.server import SrvDaemon
  File "/usr/lib/xen-4.0/lib/python/xen/xend/server/SrvDaemon.py",
line 26, in <module>
    import relocate
  File "/usr/lib/xen-4.0/lib/python/xen/xend/server/relocate.py", line
28, in <module>
    from xen.xend import XendDomain
  File "/usr/lib/xen-4.0/lib/python/xen/xend/XendDomain.py", line 36,
in <module>
    from xen.xend import XendOptions, XendCheckpoint, XendDomainInfo
  File "/usr/lib/xen-4.0/lib/python/xen/xend/XendCheckpoint.py", line
20, in <module>
    from xen.xend import balloon, sxp, image
  File "/usr/lib/xen-4.0/lib/python/xen/xend/image.py", line 46, in
<module>
    xc = xen.lowlevel.xc.xc()
xen.lowlevel.xc.Error: (1, ''Internal error'', ''Could
not obtain handle on privileged command interface (2 = No such file or
directory)'')
root@xenhost:~#


 

----------

 

Thanks in advance for any suggestions,

 

Scott

 
> Date: Mon, 10 Jan 2011 10:26:40 +0000
> From: mark@campbell-lange.net
> To: sawozny@hotmail.com
> CC: vchampion@gmail.com; xen-users@lists.xensource.com
> Subject: Re: [Xen-users] (no subject)
> 
> 
> On Sun, Jan 09, 2011 at 11:37:18PM +0000, Scott A. Wozny wrote:
> > 
> > Hi Mark,
> > 
> > 2 main reasons. The secondary reason is that I''ve had poor
luck with pre-compiled Xen packages (I haven''t tried it on this distro,
but I wasn''t even able to get the live CD to work), but the primary
reason is that I need to use Xen 4 (need to be able to do guest disk resize
without shutting the guest down) and I prefer to do it on Ubuntu for which there
is no Xen 4 package. The reason I''m here asking about Xen 3 is because
I was getting so frustrated trying to get Xen 4 to compile that I thought
perhaps it was too new and a more mature code base like Xen 3 might compile and
install properly for me. Once I got that to work I was going to take what I had
learned and go back to my original Xen 4 plan, hopefully with knowledge that
would help me get that to work. However, now that I realize I can''t get
Xen 3 to compile and work properly on this box either, I''ve been
thinking I have a hardware compatibility problem which is why I posted to this
forum asking for any tips and tricks people could share on tracking down whether
there really was a hardware compatibility problem here and from there how to fix
it. Primarily this is a learning exercise for me so I can eventually get back to
my original goal.> > 
> > If you have any suggestions on how to get there, I''m
definitely interested in hearing your thoughts.
> 
> I run a load of servers on Debian squeeze, which uses xen 4.0.1 at
> present and works pretty well (had some issues with vt-d stuff..).
> Extremely simply setup, you just have to change the order in
> /etc/grub.d/ to get xen to boot by default.
> 
> Packages that should give you everything you need:
> 
> xen-linux-system-2.6.32-5-xen-amd64
> xen-qemu-dm-4.0 (this for hvm)
> 
> Regards,
> Mark
> 
> > 
> > Thanks,
> > 
> > Scott
> > 
> > 
> > 
> > CC: vchampion@gmail.com; xen-users@lists.xensource.com
> > From: mark@campbell-lange.net
> > Subject: Re: [Xen-users] (no subject)
> > Date: Sun, 9 Jan 2011 23:18:18 +0000
> > To: sawozny@hotmail.com
> > 
> > 
> > 
> > 
> > 
> > On 9 Jan 2011, at 21:11, "Scott A. Wozny"
<sawozny@hotmail.com> wrote:
> > 
> > 
> > 
> > 
> > First of all, sorry about the lack of a subject on the email.
I''m usually better about that stuff.
> > 
> > Anyway, the boot sequence goes by pretty fast, but here is the results
of booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built
per the instructions found at
http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/
:
> > 
> > 
> > 
> > 
> > Why are you compiling from source with debian? Just install the
xen-linux-system packages.
> > 
> > Regards,
> > Mark
> > 
> > 
> > 
> > Grub Entry:
> > root (hd0,0)
> > kernel /xen-3.4.3.gz
> > module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro
console=tty0
> > module /initrd.img-2.6.18.8-xen
> > 
> > 
> > Boot results:
> > 
> > 
> > Booting ''Xen 3.4.3 / Debian GNU/Linux, kernel
2.6.18.8-xen''
> > 
> > 
> > root (hd0,0)
> > Filesystem type is extfs2, partition type 0x83
> > kernel /xen-3.4.3.gz
> > [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078,
entry=0x100000]
> > 
> > module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro
console=tty0
> > [Multiboot-module @0x298000, 0x7412d8 bytes]
> > module /initrd.img-2.6.18.8-xen
> > [Multiboot-module @0x9d (this line displays to varying lengths each
time, but it goes by so fast I can''t get the rest of it before the
machine reboots)
> > 
> > 
> > 
> > 
> > A different xen kernel also showed up in my grub that doesn''t
reboot, but also doesn''t boot properly. Here are the results of that if
it helps:
> > 
> > 
> > Grub entry:
> > root (hd0,0)
> > kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> > initrd /initrd.img-2.6.18.8-xen
> > 
> > 
> > Boot results:
> > 
> > 
> > Booting ''Debian GNU/Linux, kernel 2.6.18.8-xen''
> > 
> > 
> > root (hd0,0)
> > Filesystem type is extfs2, partition type 0x83
> > kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> > 
> > 
> > Error 13: Invalid or unsupported executable format
> > 
> > 
> > Press any key to continue...
> > 
> > Here are the dmesg file contents once I booted back into the original
kernel built as part of the Debian 5.0.7 install (if you can recommend any good
resources on interpreting dmesg output I''d appreciate it; in the
meantime I''ll start with Google; also, there was a TV card and modem in
the machine that an earlier version of the dmesg file was complaining about
compatibility; I don''t need either so I''ve pulled them out of
the machine and these are the results of the machine booting without them, but
do you think I should do a full reinstall now that they''re gone?):
> > 
> > [ 0.000000] Initializing cgroup subsys cpuset
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Thu Nov 25 04:30:55 UTC 2010
> > [ 0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> > [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
> > [ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
> > [ 0.000000] BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
> > [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200
used
> > [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of
3200 used
> > [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries
of 3200 used
> > [ 0.000000] max_pfn_mapped = 2293760
> > [ 0.000000] init_memory_mapping
> > [ 0.000000] DMI present.
> > [ 0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM)
> > [ 0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717
MSFT 97)
> > [ 0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1 8A7G1 8A7G1-C0 4 INTL
20051117)
> > [ 0.000000] ACPI: FACS CFFAE000, 0040
> > [ 0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG 20090717 MSFT
97)
> > [ 0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717
MSFT 97)
> > [ 0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT 20090717 MSFT
97)
> > [ 0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717
MSFT 97)
> > [ 0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS NVHDCP 20090717 MSFT
97)
> > [ 0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm CpuPm 12 INTL
20051117)
> > [ 0.000000] No NUMA configuration found
> > [ 0.000000] Faking a node at 0000000000000000-0000000230000000
> > [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200
used
> > [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of
3200 used
> > [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries
of 3200 used
> > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
> > [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
> > [ 0.000000] bootmap [0000000000017000 - 000000000005cfff] pages 46
> > [ 0.000000] early res: 0 [0-fff] BIOS data page
> > [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
> > [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
> > [ 0.000000] early res: 3 [378c2000-37fef99a] RAMDISK
> > [ 0.000000] early res: 4 [9bc00-fffff] BIOS reserved
> > [ 0.000000] early res: 5 [8000-11fff] PGTABLE
> > [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD ->
[ffff810001200000-ffff810003ffffff] on node 0
> > [ 0.000000] [ffffe20003800000-ffffe20007bfffff] PMD ->
[ffff81000c000000-ffff8100103fffff] on node 0
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0 -> 4096
> > [ 0.000000] DMA32 4096 -> 1048576
> > [ 0.000000] Normal 1048576 -> 2293760
> > [ 0.000000] Movable zone start PFN for each node
> > [ 0.000000] early_node_map[3] active PFN ranges
> > [ 0.000000] 0: 0 -> 155
> > [ 0.000000] 0: 256 -> 851872
> > [ 0.000000] 0: 1048576 -> 2293760
> > [ 0.000000] On node 0 totalpages: 2096955
> > [ 0.000000] DMA zone: 56 pages used for memmap
> > [ 0.000000] DMA zone: 1256 pages reserved
> > [ 0.000000] DMA zone: 2683 pages, LIFO batch:0
> > [ 0.000000] DMA32 zone: 14280 pages used for memmap
> > [ 0.000000] DMA32 zone: 833496 pages, LIFO batch:31
> > [ 0.000000] Normal zone: 17024 pages used for memmap
> > [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
> > [ 0.000000] Movable zone: 0 pages used for memmap
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> > [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI
0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high
edge)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high
edge)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] ACPI: IRQ14 used by override.
> > [ 0.000000] ACPI: IRQ15 used by override.
> > [ 0.000000] Setting APIC routing to flat
> > [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] PM: Registered nosave memory: 000000000009b000 -
000000000009c000
> > [ 0.000000] PM: Registered nosave memory: 000000000009c000 -
00000000000a0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
> > [ 0.000000] PM: Registered nosave memory: 00000000cffa0000 -
00000000cffae000
> > [ 0.000000] PM: Registered nosave memory: 00000000cffae000 -
00000000cfff0000
> > [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 -
00000000d0000000
> > [ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000fec00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
> > [ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fee00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
> > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000fff00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
> > [ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
> > [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> > [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
> > [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2064339
> > [ 0.000000] Policy zone: Normal
> > [ 0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro
quiet
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> > [ 0.000000] TSC calibrated against PM_TIMER
> > [ 0.000000] time.c: Detected 2333.293 MHz processor.
> > [ 0.004000] spurious 8259A interrupt: IRQ7.
> > [ 0.004000] Console: colour VGA+ 80x25
> > [ 0.004000] console [tty0] enabled
> > [ 0.004000] Checking aperture...
> > [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
> > [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
> > [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > [ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
> > [ 0.004000] Memory: 8192680k/9175040k available (2229k kernel code,
195140k reserved, 1084k data, 392k init)
> > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> > [ 0.004000] hpet clockevent registered
> > [ 0.083840] Calibrating delay using timer specific routine.. 4671.46
BogoMIPS (lpj=9342927)
> > [ 0.083878] Security Framework initialized
> > [ 0.083884] SELinux: Disabled at boot.
> > [ 0.083887] Capability LSM initialized
> > [ 0.084005] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
> > [ 0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> > [ 0.090266] Mount-cache hash table entries: 256
> > [ 0.090428] Initializing cgroup subsys ns
> > [ 0.090433] Initializing cgroup subsys cpuacct
> > [ 0.090436] Initializing cgroup subsys devices
> > [ 0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.090459] CPU: L2 cache: 2048K
> > [ 0.090461] CPU 0/0 -> Node 0
> > [ 0.090462] CPU: Physical Processor ID: 0
> > [ 0.090463] CPU: Processor Core ID: 0
> > [ 0.090471] CPU0: Thermal monitoring enabled (TM2)
> > [ 0.090472] using mwait in idle threads.
> > [ 0.091391] ACPI: Core revision 20080321
> > [ 0.142651] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.142654] Using local APIC timer interrupts.
> > [ 0.148009] APIC timer calibration result 20833012
> > [ 0.148009] Detected 20.833 MHz APIC timer.
> > [ 0.148009] Booting processor 1/1 ip 6000
> > [ 0.156009] Initializing CPU#1
> > [ 0.156009] Calibrating delay using timer specific routine.. 4666.64
BogoMIPS (lpj=9333287)
> > [ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.156009] CPU: L2 cache: 2048K
> > [ 0.156009] CPU 1/1 -> Node 0
> > [ 0.156009] CPU: Physical Processor ID: 0
> > [ 0.156009] CPU: Processor Core ID: 1
> > [ 0.156009] CPU1: Thermal monitoring enabled (TM2)
> > [ 0.236014] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> > [ 0.240015] Booting processor 2/2 ip 6000
> > [ 0.248015] Initializing CPU#2
> > [ 0.248015] Calibrating delay using timer specific routine.. 4666.71
BogoMIPS (lpj=9333433)
> > [ 0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.248015] CPU: L2 cache: 2048K
> > [ 0.248015] CPU 2/2 -> Node 0
> > [ 0.248015] CPU: Physical Processor ID: 0
> > [ 0.248015] CPU: Processor Core ID: 2
> > [ 0.248015] CPU2: Thermal monitoring enabled (TM2)
> > [ 0.327750] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> > [ 0.332020] Booting processor 3/3 ip 6000
> > [ 0.340021] Initializing CPU#3
> > [ 0.340021] Calibrating delay using timer specific routine.. 4666.67
BogoMIPS (lpj=9333345)
> > [ 0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.340021] CPU: L2 cache: 2048K
> > [ 0.340021] CPU 3/3 -> Node 0
> > [ 0.340021] CPU: Physical Processor ID: 0
> > [ 0.340021] CPU: Processor Core ID: 3
> > [ 0.340021] CPU3: Thermal monitoring enabled (TM2)
> > [ 0.419670] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> > [ 0.424026] Brought up 4 CPUs
> > [ 0.424026] Total of 4 processors activated (18671.49 BogoMIPS).
> > [ 0.424026] CPU0 attaching sched-domain:
> > [ 0.424026] domain 0: span 0-1
> > [ 0.424026] groups: 0 1
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 0-1 2-3
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU1 attaching sched-domain:
> > [ 0.424026] domain 0: span 0-1
> > [ 0.424026] groups: 1 0
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 0-1 2-3
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU2 attaching sched-domain:
> > [ 0.424026] domain 0: span 2-3
> > [ 0.424026] groups: 2 3
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 2-3 0-1
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU3 attaching sched-domain:
> > [ 0.424026] domain 0: span 2-3
> > [ 0.424026] groups: 3 2
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 2-3 0-1
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] net_namespace: 1224 bytes
> > [ 0.424026] Booting paravirtualized kernel on bare hardware
> > [ 0.424026] NET: Registered protocol family 16
> > [ 0.424026] ACPI: bus type pci registered
> > [ 0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0
- 255
> > [ 0.424026] PCI: Not using MMCONFIG.
> > [ 0.424026] PCI: Using configuration type 1 for base access
> > [ 0.428602] ACPI: EC: Look up EC in DSDT
> > [ 0.447520] ACPI: Interpreter enabled
> > [ 0.447523] ACPI: (supports S0 S1 S3 S4 S5)
> > [ 0.447539] ACPI: Using IOAPIC for interrupt routing
> > [ 0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0
- 255
> > [ 0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
> > [ 0.470851] PCI: Using MMCONFIG at e0000000 - efffffff
> > [ 0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > [ 0.500771] PCI: Transparent bridge - 0000:00:09.0
> > [ 0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > [ 0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
> > [ 0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
> > [ 0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> > [ 0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> > [ 0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> > [ 0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7
> > [ 0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
> > [ 0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
> > [ 0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> > [ 0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
> > [ 0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
> > [ 0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
> > [ 0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
> > [ 0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> > [ 0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
> > [ 0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
> > [ 0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
> > [ 0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
> > [ 0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
> > [ 0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
> > [ 0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
> > [ 0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay
> > [ 0.540903] pnp: PnP ACPI init
> > [ 0.540903] ACPI: bus type pnp registered
> > [ 0.540903] pnp 00:00: parse allocated resources
> > [ 0.540903] pnp 00:00: add io 0xcf8-0xcff flags 0x1
> > [ 0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> > [ 0.540903] pnp 00:01: parse allocated resources
> > [ 0.540903] pnp 00:01: add dma 4 flags 0x4
> > [ 0.540903] pnp 00:01: add io 0x0-0xf flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x81-0x83 flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x87-0x87 flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x89-0x8b flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x8f-0x8f flags 0x1
> > [ 0.540903] pnp 00:01: add io 0xc0-0xdf flags 0x1
> > [ 0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> > [ 0.540926] pnp 00:02: parse allocated resources
> > [ 0.540930] pnp 00:02: add io 0x61-0x61 flags 0x1
> > [ 0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
> > [ 0.544903] pnp 00:03: parse allocated resources
> > [ 0.544903] pnp 00:03: add io 0xf0-0xff flags 0x1
> > [ 0.544903] pnp 00:03: add irq 13 flags 0x1
> > [ 0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> > [ 0.544903] pnp 00:04: parse allocated resources
> > [ 0.544903] pnp 00:04: add io 0x10-0x1f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x22-0x3f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x44-0x4d flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x50-0x5f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x62-0x63 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x65-0x6f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x72-0x7f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x80-0x80 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x84-0x86 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x88-0x88 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x8c-0x8e flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x90-0x9f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0xa2-0xbf flags 0x1
> > [ 0.544903] pnp 00:04: add io 0xe0-0xef flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x800-0x80f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4000-0x407f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4080-0x40ff flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4400-0x447f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4480-0x44ff flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4800-0x487f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4880-0x48ff flags 0x1
> > [ 0.544903] pnp 00:04: add mem 0x0-0xffffffffffffffff flags 0x10000000
> > [ 0.544903] pnp 00:04: add mem 0xfefe2000-0xfefe3fff flags 0x0
> > [ 0.544903] pnp 00:04: add mem 0xfefe1000-0xfefe1fff flags 0x0
> > [ 0.544903] pnp 00:04: add mem 0xfee01000-0xfeefffff flags 0x0
> > [ 0.544903] pnp 00:04: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.544903] pnp 00:05: parse allocated resources
> > [ 0.544903] pnp 00:05: add mem 0xfed00000-0xfed00fff flags 0x1
> > [ 0.544903] pnp 00:05: add irq 8 flags 0x1
> > [ 0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
> > [ 0.544903] pnp 00:06: parse allocated resources
> > [ 0.544903] pnp 00:06: add io 0x70-0x71 flags 0x1
> > [ 0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> > [ 0.544903] pnp 00:07: parse allocated resources
> > [ 0.544903] pnp 00:07: add mem 0xfec00000-0xfec00fff flags 0x0
> > [ 0.544903] pnp 00:07: add mem 0xfee00000-0xfee00fff flags 0x0
> > [ 0.544903] pnp 00:07: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.544903] pnp 00:08: parse allocated resources
> > [ 0.544903] pnp 00:08: add io 0x60-0x60 flags 0x1
> > [ 0.544903] pnp 00:08: add io 0x64-0x64 flags 0x1
> > [ 0.544903] pnp 00:08: add irq 1 flags 0x1
> > [ 0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
> > [ 0.548903] pnp 00:09: parse allocated resources
> > [ 0.548903] pnp 00:09: add irq 12 flags 0x1
> > [ 0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
(active)
> > [ 0.548903] pnp 00:0a: parse allocated resources
> > [ 0.548903] pnp 00:0a: add io 0x0-0xffffffffffffffff flags 0x10000001
> > [ 0.548903] pnp 00:0a: add io 0xa00-0xa0f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa10-0xa1f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa20-0xa2f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa30-0xa3f flags 0x1
> > [ 0.548903] pnp 00:0a: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.548903] pnp 00:0b: parse allocated resources
> > [ 0.548903] pnp 00:0b: add mem 0xe0000000-0xefffffff flags 0x0
> > [ 0.548903] pnp 00:0b: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.548903] pnp 00:0c: parse allocated resources
> > [ 0.548903] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
> > [ 0.548903] pnp 00:0c: add mem 0xc0000-0xcffff flags 0x0
> > [ 0.548903] pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0
> > [ 0.548903] pnp 00:0c: add mem 0x100000-0xcfffffff flags 0x1
> > [ 0.548903] pnp 00:0c: add mem 0xfec00000-0xffffffff flags 0x0
> > [ 0.548903] pnp 00:0c: PNP0c01: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [ 0.554581] pnp: PnP ACPI: found 13 devices
> > [ 0.554581] ACPI: ACPI bus type pnp unregistered
> > [ 0.554581] usbcore: registered new interface driver usbfs
> > [ 0.554581] usbcore: registered new interface driver hub
> > [ 0.554581] usbcore: registered new device driver usb
> > [ 0.554581] PCI: Using ACPI for IRQ routing
> > [ 0.571245] PCI-GART: No AMD northbridge found.
> > [ 0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
> > [ 0.571257] hpet0: 4 64-bit timers, 25000000 Hz
> > [ 0.575216] ACPI: RTC can wake from S4
> > [ 0.578101] Switched to high resolution mode on CPU 0
> > [ 0.578546] Switched to high resolution mode on CPU 1
> > [ 0.578551] Switched to high resolution mode on CPU 3
> > [ 0.579207] Switched to high resolution mode on CPU 2
> > [ 0.590046] pnp: the driver ''system'' has been
registered
> > [ 0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
> > [ 0.590062] system 00:04: ioport range 0x800-0x80f has been reserved
> > [ 0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved
> > [ 0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved
> > [ 0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved
> > [ 0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved
> > [ 0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved
> > [ 0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved
> > [ 0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been
reserved
> > [ 0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been
reserved
> > [ 0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been
reserved
> > [ 0.590087] system 00:04: driver attached
> > [ 0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not
be reserved
> > [ 0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not
be reserved
> > [ 0.590099] system 00:07: driver attached
> > [ 0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved
> > [ 0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved
> > [ 0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved
> > [ 0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved
> > [ 0.590115] system 00:0a: driver attached
> > [ 0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
> > [ 0.590122] system 00:0b: driver attached
> > [ 0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be
reserved
> > [ 0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been
reserved
> > [ 0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
> > [ 0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
> > [ 0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not
be reserved
> > [ 0.590140] system 00:0c: driver attached
> > [ 0.593429] PCI: Bridge: 0000:00:09.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:0c.0
> > [ 0.593429] IO window: e000-efff
> > [ 0.593429] MEM window: 0xfa000000-0xfeafffff
> > [ 0.593429] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
> > [ 0.593429] PCI: Bridge: 0000:00:15.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:16.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:17.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: 0xfeb00000-0xfebfffff
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:18.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64
> > [ 0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
> > [ 0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0]
-> GSI 23 (level, low) -> IRQ 23
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3]
-> GSI 22 (level, low) -> IRQ 22
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4]
-> GSI 21 (level, low) -> IRQ 21
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5]
-> GSI 20 (level, low) -> IRQ 20
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6]
-> GSI 23 (level, low) -> IRQ 23
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64
> > [ 0.593430] NET: Registered protocol family 2
> > [ 0.642185] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
> > [ 0.644364] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
> > [ 0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
> > [ 0.649453] TCP: Hash tables configured (established 524288 bind
65536)
> > [ 0.649456] TCP reno registered
> > [ 0.658058] NET: Registered protocol family 1
> > [ 0.658160] checking if image is initramfs... it is
> > [ 1.186404] Freeing initrd memory: 7350k freed
> > [ 1.191507] audit: initializing netlink socket (disabled)
> > [ 1.191507] type=2000 audit(1294606162.172:1): initialized
> > [ 1.201065] Total HugeTLB memory allocated, 0
> > [ 1.201065] VFS: Disk quotas dquot_6.5.1
> > [ 1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> > [ 1.201065] msgmni has been set to 16015
> > [ 1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
> > [ 1.201065] io scheduler noop registered
> > [ 1.201065] io scheduler anticipatory registered
> > [ 1.201065] io scheduler deadline registered
> > [ 1.201065] io scheduler cfq registered (default)
> > [ 1.272051] pci 0000:02:00.0: Boot video device
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:0c.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:15.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:16.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:17.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64
> > [ 1.273122] assign_interrupt_mode Found MSI capability
> > [ 1.273122] Allocate Port Service[0000:00:18.0:pcie00]
> > [ 1.278234] hpet_resources: 0xfed00000 is busy
> > [ 1.278234] Linux agpgart interface v0.103
> > [ 1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
> > [ 1.278234] pnp: the driver ''serial'' has been
registered
> > [ 1.282230] brd: module loaded
> > [ 1.282230] input: Macintosh mouse button emulation as
/class/input/input0
> > [ 1.282230] pnp: the driver ''i8042 kbd'' has been
registered
> > [ 1.282230] i8042 kbd 00:08: driver attached
> > [ 1.282230] pnp: the driver ''i8042 aux'' has been
registered
> > [ 1.282230] i8042 aux 00:09: driver attached
> > [ 1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
> > [ 1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12
> > [ 1.302218] mice: PS/2 mouse device common for all mice
> > [ 1.302218] pnp: the driver ''rtc_cmos'' has been
registered
> > [ 1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> > [ 1.302218] rtc0: alarms up to one year, y3k
> > [ 1.302218] rtc_cmos 00:06: driver attached
> > [ 1.302218] cpuidle: using governor ladder
> > [ 1.302218] cpuidle: using governor menu
> > [ 1.302218] No iBFT detected.
> > [ 1.302563] TCP cubic registered
> > [ 1.302563] NET: Registered protocol family 17
> > [ 1.302563] registered taskstats version 1
> > [ 1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09
20:49:22 UTC (1294606162)
> > [ 1.302563] Freeing unused kernel memory: 392k freed
> > [ 1.326091] input: AT Translated Set 2 keyboard as /class/input/input1
> > [ 1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm P001Ist 11 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:00 is registered as cooling_device0
> > [ 1.379078] ACPI: Processor [P001] (supports 8 throttling states)
> > [ 1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm P002Ist 12 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:01 is registered as cooling_device1
> > [ 1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm P003Ist 12 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:02 is registered as cooling_device2
> > [ 1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm P004Ist 12 INTL
20051117)
> > [ 1.383072] ACPI: ACPI0007:03 is registered as cooling_device3
> > [ 1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0
> > [ 1.383072] ACPI: Thermal Zone [THRM] (33 C)
> > [ 1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
> > [ 1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2]
-> GSI 22 (level, low) -> IRQ 22
> > [ 1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64
> > [ 1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller
> > [ 1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned
bus number 1
> > [ 1.556086] ehci_hcd 0000:00:04.1: debug port 1
> > [ 1.556086] PCI: cache line size of 32 is not supported by device
0000:00:04.1
> > [ 1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00
> > [ 1.556731] ohci_hcd: 2006 August 04 USB 1.1 ''Open''
Host Controller (OHCI) Driver
> > [ 1.560731] No dock devices found.
> > [ 1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
> > [ 1.564968] usb usb1: configuration #1 chosen from 1 choice
> > [ 1.564995] hub 1-0:1.0: USB hub found
> > [ 1.565003] hub 1-0:1.0: 6 ports detected
> > [ 1.568731] SCSI subsystem initialized
> > [ 1.580731] libata version 3.00 loaded.
> > [ 1.673459] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
> > [ 1.673459] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.673459] usb usb1: Product: EHCI Host Controller
> > [ 1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> > [ 1.673459] usb usb1: SerialNumber: 0000:00:04.1
> > [ 1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
> > [ 1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12]
-> GSI 21 (level, low) -> IRQ 21
> > [ 1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64
> > [ 1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller
> > [ 1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned
bus number 2
> > [ 1.673459] ehci_hcd 0000:00:06.1: debug port 1
> > [ 1.673459] PCI: cache line size of 32 is not supported by device
0000:00:06.1
> > [ 1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800
> > [ 1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
> > [ 1.689512] usb usb2: configuration #1 chosen from 1 choice
> > [ 1.689537] hub 2-0:1.0: USB hub found
> > [ 1.689543] hub 2-0:1.0: 6 ports detected
> > [ 1.792316] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
> > [ 1.792319] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.792321] usb usb2: Product: EHCI Host Controller
> > [ 1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> > [ 1.792324] usb usb2: SerialNumber: 0000:00:06.1
> > [ 1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
> > [ 1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0]
-> GSI 20 (level, low) -> IRQ 20
> > [ 1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64
> > [ 1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller
> > [ 1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned
bus number 3
> > [ 1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000
> > [ 1.855515] usb usb3: configuration #1 chosen from 1 choice
> > [ 1.855538] hub 3-0:1.0: USB hub found
> > [ 1.855544] hub 3-0:1.0: 6 ports detected
> > [ 1.957533] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
> > [ 1.957536] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.957538] usb usb3: Product: OHCI Host Controller
> > [ 1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> > [ 1.957541] usb usb3: SerialNumber: 0000:00:04.0
> > [ 1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
> > [ 1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11]
-> GSI 23 (level, low) -> IRQ 23
> > [ 1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64
> > [ 1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller
> > [ 1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned
bus number 4
> > [ 1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000
> > [ 2.015521] usb usb4: configuration #1 chosen from 1 choice
> > [ 2.015543] hub 4-0:1.0: USB hub found
> > [ 2.015549] hub 4-0:1.0: 6 ports detected
> > [ 2.105477] usb 2-3: new high speed USB device using ehci_hcd and
address 2
> > [ 2.117542] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
> > [ 2.117545] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 2.117547] usb usb4: Product: OHCI Host Controller
> > [ 2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> > [ 2.117550] usb usb4: SerialNumber: 0000:00:06.0
> > [ 2.121473] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
> > [ 2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
> > [ 2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC]
-> GSI 22 (level, low) -> IRQ 22
> > [ 2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> > [ 2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83
has an invalid bInterval 30, changing to 8
> > [ 2.275186] usb 2-3: configuration #1 chosen from 1 choice
> > [ 2.278384] usb 2-3: New USB device found, idVendor=0bda,
idProduct=0152
> > [ 2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> > [ 2.278384] usb 2-3: Product: USB2.0-CRW
> > [ 2.278384] usb 2-3: Manufacturer: Generic
> > [ 2.278384] usb 2-3: SerialNumber: 20060413092100000
> > [ 2.300419] Initializing USB Mass Storage driver...
> > [ 2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3,
addr 00:22:68:3a:6a:b7
> > [ 2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq
gbit lnktim msi desc-v3
> > [ 2.801910] ahci 0000:00:0b.0: version 3.0
> > [ 2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
> > [ 2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0]
-> GSI 21 (level, low) -> IRQ 21
> > [ 2.950553] usb 3-4: new low speed USB device using ohci_hcd and
address 2
> > [ 3.169044] usb 3-4: configuration #1 chosen from 1 choice
> > [ 3.169044] usb 3-4: New USB device found, idVendor=04eb,
idProduct=e030
> > [ 3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> > [ 3.169044] usb 3-4: Product: Media Center Interface
> > [ 3.169044] usb 3-4: Manufacturer: Device
> > [ 3.517035] usb 4-4: new low speed USB device using ohci_hcd and
address 2
> > [ 3.905098] usb 4-4: configuration #1 chosen from 1 choice
> > [ 3.922229] usb 4-4: New USB device found, idVendor=04eb,
idProduct=e033
> > [ 3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> > [ 3.922233] usb 4-4: Product: eHome Infrared Transceiver
> > [ 3.922235] usb 4-4: Manufacturer: Northstar System Corp.
> > [ 3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000
> > [ 3.922229] usbcore: registered new interface driver hiddev
> > [ 3.925096] scsi0 : SCSI emulation for USB Mass Storage devices
> > [ 3.925096] usb-storage: device found at 2
> > [ 3.925096] usb-storage: waiting for device to settle before scanning
> > [ 4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl RAID mode
> > [ 4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum
part
> > [ 4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64
> > [ 4.090205] scsi1 : ahci
> > [ 4.090703] scsi2 : ahci
> > [ 4.090703] scsi3 : ahci
> > [ 4.090703] scsi4 : ahci
> > [ 4.090703] scsi5 : ahci
> > [ 4.090703] scsi6 : ahci
> > [ 4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72100 irq 1274
> > [ 4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72180 irq 1274
> > [ 4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72200 irq 1274
> > [ 4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72280 irq 1274
> > [ 4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72300 irq 1274
> > [ 4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72380 irq 1274
> > [ 4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [ 4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max
UDMA/133
> > [ 4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth
31/32)
> > [ 4.659284] ata1.00: configured for UDMA/133
> > [ 5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [ 5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
> > [ 5.142984] ata2.00: configured for UDMA/100
> > [ 5.467117] ata3: SATA link down (SStatus 0 SControl 300)
> > [ 6.082425] ata4: SATA link down (SStatus 0 SControl 300)
> > [ 6.405773] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 6.725774] ata6: SATA link down (SStatus 0 SControl 300)
> > [ 7.115290] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ:
0 ANSI: 5
> > [ 7.115290] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH15F EG00 PQ: 0
ANSI: 5
> > [ 7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19
> > [ 7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A]
-> GSI 19 (level, low) -> IRQ 19
> > [ 7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64
> > [ 7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4]
> > [ 7.467156] Driver ''sd'' needs updating - please use
bus_type methods
> > [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> > [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off
> > [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn''t support DPO or FUA
> > [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> > [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off
> > [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn''t support DPO or FUA
> > [ 7.467156] sda:<4>Driver ''sr'' needs updating
- please use bus_type methods
> > [ 7.484514] sda1 sda2
> > [ 7.484644] sd 1:0:0:0: [sda] Attached SCSI disk
> > [ 7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
> > [ 7.712076] Uniform CD-ROM driver Revision: 3.20
> > [ 7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0
> > [ 7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0
> > [ 7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5
> > [ 9.251645] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00995efa00016c20]
> > [ 11.721065] usb-storage: device scan complete
> > [ 11.721065] scsi 0:0:0:0: Direct-Access Generic- Compact Flash 1.00
PQ: 0 ANSI: 0 CCS
> > [ 12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk
> > [ 12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0
> > [ 17.887389] usbhid: timeout initializing reports
> > [ 17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic
USB2.0-CRW] on usb-0000:00:06.1-3
> > [ 17.887477] usbcore: registered new interface driver usb-storage
> > [ 17.887480] USB Mass Storage support registered.
> > [ 18.452265] input: Device Media Center Interface as
/class/input/input2
> > [ 18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device
Media Center Interface] on usb-0000:00:04.0-4
> > [ 18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media
Center Interface] on usb-0000:00:04.0-4
> > [ 18.483626] usbcore: registered new interface driver usbhid
> > [ 18.483629] usbhid: v2.6:USB HID core driver
> > [ 18.559424] device-mapper: uevent: version 1.0.3
> > [ 18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
initialised: dm-devel@redhat.com
> > [ 18.682017] PM: Starting manual resume from disk
> > [ 18.753394] kjournald starting. Commit interval 5 seconds
> > [ 18.753394] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 19.766553] udevd version 125 started
> > [ 20.072797] input: Power Button (FF) as /class/input/input3
> > [ 20.165593] ACPI: Power Button (FF) [PWRF]
> > [ 20.167337] input: Power Button (CM) as /class/input/input4
> > [ 20.231290] ACPI: Power Button (CM) [PWRB]
> > [ 20.233467] ACPI: WMI: Mapper loaded
> > [ 20.381495] input: PC Speaker as /class/input/input5
> > [ 20.398514] Error: Driver ''pcspkr'' is already
registered, aborting...
> > [ 20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
> > [ 20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA]
-> GSI 20 (level, low) -> IRQ 20
> > [ 20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64
> > [ 22.555585] EXT3 FS on dm-0, internal journal
> > [ 23.159449] loop: module loaded
> > [ 23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1.
Priority:-1 extents:1 across:24023032k
> > xenhost:~#
> > 
> > 
> > 
> > 
> > 
> > From: vchampion@gmail.com
> > Date: Sun, 9 Jan 2011 10:13:30 +0300
> > Subject: Re: [Xen-users] (no subject)
> > To: sawozny@hotmail.com
> > CC: Xen-users@lists.xensource.com
> > 
> > Hi!
> > 
> > 
> > On which state the loading of xen kernel stops? What are you seeing on
display in that moment?
> > Can you put dmesg here?
> > 
> > 
> > 2011/1/9 Scott A. Wozny <sawozny@hotmail.com>
> > 
> > 
> > OK, so after several weeks of trying to get various versions of Xen
running of various distributions, I''m starting to wonder if
I''ve got a hardware compatibility problem and as the system never
really boots with the Xen kernel I''ve got no log files to tell me where
the problem is. I was wondering if there''s a way to compile from source
with debug turned on, particularly for early boot problems, and where those logs
get stored.
> > 
> > In my research, it seems like everyone who has had problems getting
Xen running has fixed it through errors reported during the compile process and
correcting source files to match but I''ve been poring through the
thousands of lines of output produced by the various makes I''ve been
doing in different distro and source combinations and I can''t find
anything that says "You have a problem here". They just compile
cleanly and then don''t boot.
> > 
> > Any and all suggestions would be greatly appreciated.
> > 
> > Thanks,
> > 
> > Scott
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> > 
> > 
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users  		 	   		  
-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users


      

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Scott A. Wozny

2011-Jan-16 23:04 UTC

head link

RE: [Xen-users] (no subject)

That''s part of the problem.  Dom0 isn''t geting loaded.
I''m assuming that since xend won''t start then it
won''t even try to start Dom0.  There''s no /dev/xen, no
/proc/xen and nothing with ''xen'' is contained in the lsmod
listing.  I added the xenfs file system as per Mark Pryor''s suggestion,
but it won''t load as there is no device /proc/xen and I
haven''t been able to find any indication as to why not in all the log
files I''ve looked at (if there''s something of relevance I
should be looking at outside of the /var/log directory, I''d really
appreciate the direction).
 
I find it puzzling because this time I just installed the package instead of
compiling from source and the kernel I load on boot claims to be a xen kernel
for which I have no reason to doubt as the package install is supposed to take
care of everything.
 
I think the problem surrounds the message on xend start "WARNING!
Can''t find hypervisor information in sysfs!"  Like I said, I added
the line to fstab like Mark suggested, but it won''t take due to the
lack of /proc/xen and that is where I don''t know how to troubleshoot
any further.  Does anyone know if there''s a log file on the Xen install
I can check to see if something went wrong?
 
Thanks,
 
Scott
 



Date: Sun, 16 Jan 2011 13:38:33 -0800
From: bderzhavets@yahoo.com
Subject: RE: [Xen-users] (no subject)
To: mark@campbell-lange.net; sawozny@hotmail.com
CC: vchampion@gmail.com; xen-users@lists.xensource.com





When Dom0 gets loaded, what is output ?

1.   # ls  -l /dev/xen
2.   lsmod | grep xen

Boris.



--- On Sun, 1/16/11, Scott A. Wozny <sawozny@hotmail.com> wrote:


From: Scott A. Wozny <sawozny@hotmail.com>
Subject: RE: [Xen-users] (no subject)
To: mark@campbell-lange.net
Cc: vchampion@gmail.com, "Xen Users"
<xen-users@lists.xensource.com>
Date: Sunday, January 16, 2011, 12:17 PM




Hi Mark,
 
First of all, thanks for the suggestion of giving Squeeze a try with the install
package.  WAY easier and not only did it install, it actually boots into a Xen
kernel!  :)  Might not sound like much of an accomplishment to others, but
it''s light years ahead of where I''ve been stuck.  I did an
install of Squeeze RC1 with the base system only and then used apt-get to
install ssh and then xen-linux-system-2.6.32-5-xen-amd64 (I didn''t
install xen-qemu-dm-4.0 because my processor doesn''t support hardware
virtualization; part of why I chose Xen over KVM).  It all worked like a charm. 
No errors on install and the reboot brought me into a Xen kernel with no errors.
 
Now, I''m hoping you or someone on the list can help me with a new
difficulty.  I can''t get xend to start.  I''ve researched
several of what looked like key phrases in the error output, but most of the
similar errors are either several years old and relate to Xen 3 and, for one
reason or another, don''t look applicable to my circumstances OR are
rooted in not having a Xen kernel started up which I have confirmed I have. 
Does anyone have any suggestions on how to troubleshoot based upon the output
below?  I have looked through dmesg, messages and kern.log (the /var/log/xen
directory is empty as is /var/log/pycentral.log) and I can''t seem to
find anything that stands out.
 
----------
root@xenhost:~# uname -a
Linux xenhost 2.6.32-5-xen-amd64 #1 SMP Wed Jan 12 05:46:49 UTC 2011 x86_64
GNU/Linux
root@xenhost:~# xend start
WARNING!  Can''t find hypervisor information in sysfs!
ERROR Internal error: Could not obtain handle on privileged command interface (2
= No such file or directory)
Traceback (most recent call last):
  File "/usr/lib/xen-default/bin/xend", line 38, in <module>
    from xen.xend.server import SrvDaemon
  File "/usr/lib/xen-4.0/lib/python/xen/xend/server/SrvDaemon.py",
line 26, in <module>
    import relocate
  File "/usr/lib/xen-4.0/lib/python/xen/xend/server/relocate.py", line
28, in <module>
    from xen.xend import XendDomain
  File "/usr/lib/xen-4.0/lib/python/xen/xend/XendDomain.py", line 36,
in <module>
    from xen.xend import XendOptions, XendCheckpoint, XendDomainInfo
  File "/usr/lib/xen-4.0/lib/python/xen/xend/XendCheckpoint.py", line
20, in <module>
    from xen.xend import balloon, sxp, image
  File "/usr/lib/xen-4.0/lib/python/xen/xend/image.py", line 46, in
<module>
    xc = xen.lowlevel.xc.xc()
xen.lowlevel.xc.Error: (1, ''Internal error'', ''Could
not obtain handle on privileged command interface (2 = No such file or
directory)'')
root@xenhost:~#

 
----------
 
Thanks in advance for any suggestions,
 
Scott

 > Date: Mon, 10 Jan 2011 10:26:40 +0000
> From: mark@campbell-lange.net
> To: sawozny@hotmail.com
> CC: vchampion@gmail.com; xen-users@lists.xensource.com
> Subject: Re: [Xen-users] (no subject)
> 
> 
> On Sun, Jan 09, 2011 at 11:37:18PM +0000, Scott A. Wozny wrote:
> > 
> > Hi Mark,
> > 
> > 2 main reasons. The secondary reason is that I''ve had poor
luck with pre-compiled Xen packages (I haven''t tried it on this distro,
but I wasn''t even able to get the live CD to work), but the primary
reason is that I need to use Xen 4 (need to be able to do guest disk resize
without shutting the guest down) and I prefer to do it on Ubuntu for which there
is no Xen 4 package. The reason I''m here asking about Xen 3 is because
I was getting so frustrated trying to get Xen 4 to compile that I thought
perhaps it was too new and a more mature code base like Xen 3 might compile and
install properly for me. Once I got that to work I was going to take what I had
learned and go back to my original Xen 4 plan, hopefully with knowledge that
would help me get that to work. However, now that I realize I can''t get
Xen 3 to compile and work properly on this box either, I''ve been
thinking I have a hardware compatibility problem which is why I posted to this
forum asking for any tips and tricks people could share on tracking down whether
there really was a hardware compatibility problem here and from there how to fix
it. Primarily this is a learning exercise for me so I can eventually get back to
my original goal.
> > 
> > If you have any suggestions on how to get there, I''m
definitely interested in hearing your thoughts.
> 
> I run a load of servers on Debian squeeze, which uses xen 4.0.1 at
> present and works pretty well (had some issues with vt-d stuff..).
> Extremely simply setup, you just have to change the order in
> /etc/grub.d/ to get xen to boot by default.
> 
> Packages that should give you everything you need:
> 
> xen-linux-system-2.6.32-5-xen-amd64
> xen-qemu-dm-4.0 (this for hvm)
> 
> Regards,
> Mark
> 
> > 
> > Thanks,
> > 
> > Scott
> > 
> > 
> > 
> > CC: vchampion@gmail.com; xen-users@lists.xensource.com
> > From: mark@campbell-lange.net
> > Subject: Re: [Xen-users] (no subject)
> > Date: Sun, 9 Jan 2011 23:18:18 +0000
> > To: sawozny@hotmail.com
> > 
> > 
> > 
> > 
> > 
> > On 9 Jan 2011, at 21:11, "Scott A. Wozny"
<sawozny@hotmail.com> wrote:
> > 
> > 
> > 
> > 
> > First of all, sorry about the lack of a subject on the email.
I''m usually better about that stuff.
> > 
> > Anyway, the boot sequence goes by pretty fast, but here is the results
of booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built
per the instructions found at
http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/
:
> > 
> > 
> > 
> > 
> > Why are you compiling from source with debian? Just install the
xen-linux-system packages.
> > 
> > Regards,
> > Mark
> > 
> > 
> > 
> > Grub Entry:
> > root (hd0,0)
> > kernel /xen-3.4.3.gz
> > module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro
console=tty0
> > module /initrd.img-2.6.18.8-xen
> > 
> > 
> > Boot results:
> > 
> > 
> > Booting ''Xen 3.4.3 / Debian GNU/Linux, kernel
2.6.18.8-xen''
> > 
> > 
> > root (hd0,0)
> > Filesystem type is extfs2, partition type 0x83
> > kernel /xen-3.4.3.gz
> > [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078,
entry=0x100000]
> > 
> > module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro
console=tty0
> > [Multiboot-module @0x298000, 0x7412d8 bytes]
> > module /initrd.img-2.6.18.8-xen
> > [Multiboot-module @0x9d (this line displays to varying lengths each
time, but it goes by so fast I can''t get the rest of it before the
machine reboots)
> > 
> > 
> > 
> > 
> > A different xen kernel also showed up in my grub that doesn''t
reboot, but also doesn''t boot properly. Here are the results of that if
it helps:
> > 
> > 
> > Grub entry:
> > root (hd0,0)
> > kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> > initrd /initrd.img-2.6.18.8-xen
> > 
> > 
> > Boot results:
> > 
> > 
> > Booting ''Debian GNU/Linux, kernel 2.6.18.8-xen''
> > 
> > 
> > root (hd0,0)
> > Filesystem type is extfs2, partition type 0x83
> > kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> > 
> > 
> > Error 13: Invalid or unsupported executable format
> > 
> > 
> > Press any key to continue...
> > 
> > Here are the dmesg file contents once I booted back into the original
kernel built as part of the Debian 5.0.7 install (if you can recommend any good
resources on interpreting dmesg output I''d appreciate it; in the
meantime I''ll start with Google; also, there was a TV card and modem in
the machine that an earlier version of the dmesg file was complaining about
compatibility; I don''t need either so I''ve pulled them out of
the machine and these are the results of the machine booting without them, but
do you think I should do a full reinstall now that they''re gone?):
> > 
> > [ 0.000000] Initializing cgroup subsys cpuset
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Thu Nov 25 04:30:55 UTC 2010
> > [ 0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> > [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
> > [ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
> > [ 0.000000] BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
> > [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200
used
> > [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of
3200 used
> > [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries
of 3200 used
> > [ 0.000000] max_pfn_mapped = 2293760
> > [ 0.000000] init_memory_mapping
> > [ 0.000000] DMI present.
> > [ 0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM)
> > [ 0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717
MSFT 97)
> > [ 0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1 8A7G1 8A7G1-C0 4 INTL
20051117)
> > [ 0.000000] ACPI: FACS CFFAE000, 0040
> > [ 0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG 20090717 MSFT
97)
> > [ 0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717
MSFT 97)
> > [ 0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT 20090717 MSFT
97)
> > [ 0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717
MSFT 97)
> > [ 0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS NVHDCP 20090717 MSFT
97)
> > [ 0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717
MSFT 97)
> > [ 0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm CpuPm 12 INTL
20051117)
> > [ 0.000000] No NUMA configuration found
> > [ 0.000000] Faking a node at 0000000000000000-0000000230000000
> > [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200
used
> > [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of
3200 used
> > [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries
of 3200 used
> > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
> > [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
> > [ 0.000000] bootmap [0000000000017000 - 000000000005cfff] pages 46
> > [ 0.000000] early res: 0 [0-fff] BIOS data page
> > [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
> > [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
> > [ 0.000000] early res: 3 [378c2000-37fef99a] RAMDISK
> > [ 0.000000] early res: 4 [9bc00-fffff] BIOS reserved
> > [ 0.000000] early res: 5 [8000-11fff] PGTABLE
> > [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD ->
[ffff810001200000-ffff810003ffffff] on node 0
> > [ 0.000000] [ffffe20003800000-ffffe20007bfffff] PMD ->
[ffff81000c000000-ffff8100103fffff] on node 0
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0 -> 4096
> > [ 0.000000] DMA32 4096 -> 1048576
> > [ 0.000000] Normal 1048576 -> 2293760
> > [ 0.000000] Movable zone start PFN for each node
> > [ 0.000000] early_node_map[3] active PFN ranges
> > [ 0.000000] 0: 0 -> 155
> > [ 0.000000] 0: 256 -> 851872
> > [ 0.000000] 0: 1048576 -> 2293760
> > [ 0.000000] On node 0 totalpages: 2096955
> > [ 0.000000] DMA zone: 56 pages used for memmap
> > [ 0.000000] DMA zone: 1256 pages reserved
> > [ 0.000000] DMA zone: 2683 pages, LIFO batch:0
> > [ 0.000000] DMA32 zone: 14280 pages used for memmap
> > [ 0.000000] DMA32 zone: 833496 pages, LIFO batch:31
> > [ 0.000000] Normal zone: 17024 pages used for memmap
> > [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
> > [ 0.000000] Movable zone: 0 pages used for memmap
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> > [ 0.000000] ACPI: Local APIC address 0xfee00000
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> > [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI
0-23
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high
edge)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high
edge)
> > [ 0.000000] ACPI: IRQ0 used by override.
> > [ 0.000000] ACPI: IRQ2 used by override.
> > [ 0.000000] ACPI: IRQ9 used by override.
> > [ 0.000000] ACPI: IRQ14 used by override.
> > [ 0.000000] ACPI: IRQ15 used by override.
> > [ 0.000000] Setting APIC routing to flat
> > [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] PM: Registered nosave memory: 000000000009b000 -
000000000009c000
> > [ 0.000000] PM: Registered nosave memory: 000000000009c000 -
00000000000a0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
> > [ 0.000000] PM: Registered nosave memory: 00000000cffa0000 -
00000000cffae000
> > [ 0.000000] PM: Registered nosave memory: 00000000cffae000 -
00000000cfff0000
> > [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 -
00000000d0000000
> > [ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000fec00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
> > [ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fee00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
> > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000fff00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
> > [ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
> > [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> > [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
> > [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2064339
> > [ 0.000000] Policy zone: Normal
> > [ 0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro
quiet
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> > [ 0.000000] TSC calibrated against PM_TIMER
> > [ 0.000000] time.c: Detected 2333.293 MHz processor.
> > [ 0.004000] spurious 8259A interrupt: IRQ7.
> > [ 0.004000] Console: colour VGA+ 80x25
> > [ 0.004000] console [tty0] enabled
> > [ 0.004000] Checking aperture...
> > [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
> > [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
> > [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > [ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
> > [ 0.004000] Memory: 8192680k/9175040k available (2229k kernel code,
195140k reserved, 1084k data, 392k init)
> > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> > [ 0.004000] hpet clockevent registered
> > [ 0.083840] Calibrating delay using timer specific routine.. 4671.46
BogoMIPS (lpj=9342927)
> > [ 0.083878] Security Framework initialized
> > [ 0.083884] SELinux: Disabled at boot.
> > [ 0.083887] Capability LSM initialized
> > [ 0.084005] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
> > [ 0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> > [ 0.090266] Mount-cache hash table entries: 256
> > [ 0.090428] Initializing cgroup subsys ns
> > [ 0.090433] Initializing cgroup subsys cpuacct
> > [ 0.090436] Initializing cgroup subsys devices
> > [ 0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.090459] CPU: L2 cache: 2048K
> > [ 0.090461] CPU 0/0 -> Node 0
> > [ 0.090462] CPU: Physical Processor ID: 0
> > [ 0.090463] CPU: Processor Core ID: 0
> > [ 0.090471] CPU0: Thermal monitoring enabled (TM2)
> > [ 0.090472] using mwait in idle threads.
> > [ 0.091391] ACPI: Core revision 20080321
> > [ 0.142651] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.142654] Using local APIC timer interrupts.
> > [ 0.148009] APIC timer calibration result 20833012
> > [ 0.148009] Detected 20.833 MHz APIC timer.
> > [ 0.148009] Booting processor 1/1 ip 6000
> > [ 0.156009] Initializing CPU#1
> > [ 0.156009] Calibrating delay using timer specific routine.. 4666.64
BogoMIPS (lpj=9333287)
> > [ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.156009] CPU: L2 cache: 2048K
> > [ 0.156009] CPU 1/1 -> Node 0
> > [ 0.156009] CPU: Physical Processor ID: 0
> > [ 0.156009] CPU: Processor Core ID: 1
> > [ 0.156009] CPU1: Thermal monitoring enabled (TM2)
> > [ 0.236014] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> > [ 0.240015] Booting processor 2/2 ip 6000
> > [ 0.248015] Initializing CPU#2
> > [ 0.248015] Calibrating delay using timer specific routine.. 4666.71
BogoMIPS (lpj=9333433)
> > [ 0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.248015] CPU: L2 cache: 2048K
> > [ 0.248015] CPU 2/2 -> Node 0
> > [ 0.248015] CPU: Physical Processor ID: 0
> > [ 0.248015] CPU: Processor Core ID: 2
> > [ 0.248015] CPU2: Thermal monitoring enabled (TM2)
> > [ 0.327750] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> > [ 0.332020] Booting processor 3/3 ip 6000
> > [ 0.340021] Initializing CPU#3
> > [ 0.340021] Calibrating delay using timer specific routine.. 4666.67
BogoMIPS (lpj=9333345)
> > [ 0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K
> > [ 0.340021] CPU: L2 cache: 2048K
> > [ 0.340021] CPU 3/3 -> Node 0
> > [ 0.340021] CPU: Physical Processor ID: 0
> > [ 0.340021] CPU: Processor Core ID: 3
> > [ 0.340021] CPU3: Thermal monitoring enabled (TM2)
> > [ 0.419670] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
07
> > [ 0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> > [ 0.424026] Brought up 4 CPUs
> > [ 0.424026] Total of 4 processors activated (18671.49 BogoMIPS).
> > [ 0.424026] CPU0 attaching sched-domain:
> > [ 0.424026] domain 0: span 0-1
> > [ 0.424026] groups: 0 1
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 0-1 2-3
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU1 attaching sched-domain:
> > [ 0.424026] domain 0: span 0-1
> > [ 0.424026] groups: 1 0
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 0-1 2-3
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU2 attaching sched-domain:
> > [ 0.424026] domain 0: span 2-3
> > [ 0.424026] groups: 2 3
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 2-3 0-1
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] CPU3 attaching sched-domain:
> > [ 0.424026] domain 0: span 2-3
> > [ 0.424026] groups: 3 2
> > [ 0.424026] domain 1: span 0-3
> > [ 0.424026] groups: 2-3 0-1
> > [ 0.424026] domain 2: span 0-3
> > [ 0.424026] groups: 0-3
> > [ 0.424026] net_namespace: 1224 bytes
> > [ 0.424026] Booting paravirtualized kernel on bare hardware
> > [ 0.424026] NET: Registered protocol family 16
> > [ 0.424026] ACPI: bus type pci registered
> > [ 0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0
- 255
> > [ 0.424026] PCI: Not using MMCONFIG.
> > [ 0.424026] PCI: Using configuration type 1 for base access
> > [ 0.428602] ACPI: EC: Look up EC in DSDT
> > [ 0.447520] ACPI: Interpreter enabled
> > [ 0.447523] ACPI: (supports S0 S1 S3 S4 S5)
> > [ 0.447539] ACPI: Using IOAPIC for interrupt routing
> > [ 0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0
- 255
> > [ 0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
> > [ 0.470851] PCI: Using MMCONFIG at e0000000 - efffffff
> > [ 0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > [ 0.500771] PCI: Transparent bridge - 0000:00:09.0
> > [ 0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > [ 0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
> > [ 0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
> > [ 0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> > [ 0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> > [ 0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> > [ 0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7
> > [ 0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
> > [ 0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
disabled.
> > [ 0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
> > [ 0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> > [ 0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
> > [ 0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
> > [ 0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
> > [ 0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
> > [ 0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> > [ 0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
> > [ 0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
> > [ 0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
> > [ 0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0,
disabled.
> > [ 0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
> > [ 0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
> > [ 0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
> > [ 0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
> > [ 0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay
> > [ 0.540903] pnp: PnP ACPI init
> > [ 0.540903] ACPI: bus type pnp registered
> > [ 0.540903] pnp 00:00: parse allocated resources
> > [ 0.540903] pnp 00:00: add io 0xcf8-0xcff flags 0x1
> > [ 0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> > [ 0.540903] pnp 00:01: parse allocated resources
> > [ 0.540903] pnp 00:01: add dma 4 flags 0x4
> > [ 0.540903] pnp 00:01: add io 0x0-0xf flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x81-0x83 flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x87-0x87 flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x89-0x8b flags 0x1
> > [ 0.540903] pnp 00:01: add io 0x8f-0x8f flags 0x1
> > [ 0.540903] pnp 00:01: add io 0xc0-0xdf flags 0x1
> > [ 0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> > [ 0.540926] pnp 00:02: parse allocated resources
> > [ 0.540930] pnp 00:02: add io 0x61-0x61 flags 0x1
> > [ 0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
> > [ 0.544903] pnp 00:03: parse allocated resources
> > [ 0.544903] pnp 00:03: add io 0xf0-0xff flags 0x1
> > [ 0.544903] pnp 00:03: add irq 13 flags 0x1
> > [ 0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> > [ 0.544903] pnp 00:04: parse allocated resources
> > [ 0.544903] pnp 00:04: add io 0x10-0x1f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x22-0x3f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x44-0x4d flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x50-0x5f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x62-0x63 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x65-0x6f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x72-0x7f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x80-0x80 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x84-0x86 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x88-0x88 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x8c-0x8e flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x90-0x9f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0xa2-0xbf flags 0x1
> > [ 0.544903] pnp 00:04: add io 0xe0-0xef flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x800-0x80f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4000-0x407f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4080-0x40ff flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4400-0x447f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4480-0x44ff flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4800-0x487f flags 0x1
> > [ 0.544903] pnp 00:04: add io 0x4880-0x48ff flags 0x1
> > [ 0.544903] pnp 00:04: add mem 0x0-0xffffffffffffffff flags 0x10000000
> > [ 0.544903] pnp 00:04: add mem 0xfefe2000-0xfefe3fff flags 0x0
> > [ 0.544903] pnp 00:04: add mem 0xfefe1000-0xfefe1fff flags 0x0
> > [ 0.544903] pnp 00:04: add mem 0xfee01000-0xfeefffff flags 0x0
> > [ 0.544903] pnp 00:04: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.544903] pnp 00:05: parse allocated resources
> > [ 0.544903] pnp 00:05: add mem 0xfed00000-0xfed00fff flags 0x1
> > [ 0.544903] pnp 00:05: add irq 8 flags 0x1
> > [ 0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
> > [ 0.544903] pnp 00:06: parse allocated resources
> > [ 0.544903] pnp 00:06: add io 0x70-0x71 flags 0x1
> > [ 0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> > [ 0.544903] pnp 00:07: parse allocated resources
> > [ 0.544903] pnp 00:07: add mem 0xfec00000-0xfec00fff flags 0x0
> > [ 0.544903] pnp 00:07: add mem 0xfee00000-0xfee00fff flags 0x0
> > [ 0.544903] pnp 00:07: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.544903] pnp 00:08: parse allocated resources
> > [ 0.544903] pnp 00:08: add io 0x60-0x60 flags 0x1
> > [ 0.544903] pnp 00:08: add io 0x64-0x64 flags 0x1
> > [ 0.544903] pnp 00:08: add irq 1 flags 0x1
> > [ 0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
> > [ 0.548903] pnp 00:09: parse allocated resources
> > [ 0.548903] pnp 00:09: add irq 12 flags 0x1
> > [ 0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
(active)
> > [ 0.548903] pnp 00:0a: parse allocated resources
> > [ 0.548903] pnp 00:0a: add io 0x0-0xffffffffffffffff flags 0x10000001
> > [ 0.548903] pnp 00:0a: add io 0xa00-0xa0f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa10-0xa1f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa20-0xa2f flags 0x1
> > [ 0.548903] pnp 00:0a: add io 0xa30-0xa3f flags 0x1
> > [ 0.548903] pnp 00:0a: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.548903] pnp 00:0b: parse allocated resources
> > [ 0.548903] pnp 00:0b: add mem 0xe0000000-0xefffffff flags 0x0
> > [ 0.548903] pnp 00:0b: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> > [ 0.548903] pnp 00:0c: parse allocated resources
> > [ 0.548903] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
> > [ 0.548903] pnp 00:0c: add mem 0xc0000-0xcffff flags 0x0
> > [ 0.548903] pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0
> > [ 0.548903] pnp 00:0c: add mem 0x100000-0xcfffffff flags 0x1
> > [ 0.548903] pnp 00:0c: add mem 0xfec00000-0xffffffff flags 0x0
> > [ 0.548903] pnp 00:0c: PNP0c01: calling
quirk_system_pci_resources+0x0/0x15c
> > [ 0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> > [ 0.554581] pnp: PnP ACPI: found 13 devices
> > [ 0.554581] ACPI: ACPI bus type pnp unregistered
> > [ 0.554581] usbcore: registered new interface driver usbfs
> > [ 0.554581] usbcore: registered new interface driver hub
> > [ 0.554581] usbcore: registered new device driver usb
> > [ 0.554581] PCI: Using ACPI for IRQ routing
> > [ 0.571245] PCI-GART: No AMD northbridge found.
> > [ 0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
> > [ 0.571257] hpet0: 4 64-bit timers, 25000000 Hz
> > [ 0.575216] ACPI: RTC can wake from S4
> > [ 0.578101] Switched to high resolution mode on CPU 0
> > [ 0.578546] Switched to high resolution mode on CPU 1
> > [ 0.578551] Switched to high resolution mode on CPU 3
> > [ 0.579207] Switched to high resolution mode on CPU 2
> > [ 0.590046] pnp: the driver ''system'' has been
registered
> > [ 0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
> > [ 0.590062] system 00:04: ioport range 0x800-0x80f has been reserved
> > [ 0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved
> > [ 0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved
> > [ 0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved
> > [ 0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved
> > [ 0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved
> > [ 0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved
> > [ 0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been
reserved
> > [ 0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been
reserved
> > [ 0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been
reserved
> > [ 0.590087] system 00:04: driver attached
> > [ 0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not
be reserved
> > [ 0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not
be reserved
> > [ 0.590099] system 00:07: driver attached
> > [ 0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved
> > [ 0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved
> > [ 0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved
> > [ 0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved
> > [ 0.590115] system 00:0a: driver attached
> > [ 0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
> > [ 0.590122] system 00:0b: driver attached
> > [ 0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be
reserved
> > [ 0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been
reserved
> > [ 0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
> > [ 0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
> > [ 0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not
be reserved
> > [ 0.590140] system 00:0c: driver attached
> > [ 0.593429] PCI: Bridge: 0000:00:09.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:0c.0
> > [ 0.593429] IO window: e000-efff
> > [ 0.593429] MEM window: 0xfa000000-0xfeafffff
> > [ 0.593429] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
> > [ 0.593429] PCI: Bridge: 0000:00:15.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:16.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:17.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: 0xfeb00000-0xfebfffff
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Bridge: 0000:00:18.0
> > [ 0.593429] IO window: disabled.
> > [ 0.593429] MEM window: disabled.
> > [ 0.593429] PREFETCH window: disabled.
> > [ 0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64
> > [ 0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
> > [ 0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0]
-> GSI 23 (level, low) -> IRQ 23
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3]
-> GSI 22 (level, low) -> IRQ 22
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4]
-> GSI 21 (level, low) -> IRQ 21
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5]
-> GSI 20 (level, low) -> IRQ 20
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64
> > [ 0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
> > [ 0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6]
-> GSI 23 (level, low) -> IRQ 23
> > [ 0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64
> > [ 0.593430] NET: Registered protocol family 2
> > [ 0.642185] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
> > [ 0.644364] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
> > [ 0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
> > [ 0.649453] TCP: Hash tables configured (established 524288 bind
65536)
> > [ 0.649456] TCP reno registered
> > [ 0.658058] NET: Registered protocol family 1
> > [ 0.658160] checking if image is initramfs... it is
> > [ 1.186404] Freeing initrd memory: 7350k freed
> > [ 1.191507] audit: initializing netlink socket (disabled)
> > [ 1.191507] type=2000 audit(1294606162.172:1): initialized
> > [ 1.201065] Total HugeTLB memory allocated, 0
> > [ 1.201065] VFS: Disk quotas dquot_6.5.1
> > [ 1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> > [ 1.201065] msgmni has been set to 16015
> > [ 1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
> > [ 1.201065] io scheduler noop registered
> > [ 1.201065] io scheduler anticipatory registered
> > [ 1.201065] io scheduler deadline registered
> > [ 1.201065] io scheduler cfq registered (default)
> > [ 1.272051] pci 0000:02:00.0: Boot video device
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:0c.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:15.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:16.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64
> > [ 1.272968] assign_interrupt_mode Found MSI capability
> > [ 1.272968] Allocate Port Service[0000:00:17.0:pcie00]
> > [ 1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64
> > [ 1.273122] assign_interrupt_mode Found MSI capability
> > [ 1.273122] Allocate Port Service[0000:00:18.0:pcie00]
> > [ 1.278234] hpet_resources: 0xfed00000 is busy
> > [ 1.278234] Linux agpgart interface v0.103
> > [ 1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
> > [ 1.278234] pnp: the driver ''serial'' has been
registered
> > [ 1.282230] brd: module loaded
> > [ 1.282230] input: Macintosh mouse button emulation as
/class/input/input0
> > [ 1.282230] pnp: the driver ''i8042 kbd'' has been
registered
> > [ 1.282230] i8042 kbd 00:08: driver attached
> > [ 1.282230] pnp: the driver ''i8042 aux'' has been
registered
> > [ 1.282230] i8042 aux 00:09: driver attached
> > [ 1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
> > [ 1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12
> > [ 1.302218] mice: PS/2 mouse device common for all mice
> > [ 1.302218] pnp: the driver ''rtc_cmos'' has been
registered
> > [ 1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> > [ 1.302218] rtc0: alarms up to one year, y3k
> > [ 1.302218] rtc_cmos 00:06: driver attached
> > [ 1.302218] cpuidle: using governor ladder
> > [ 1.302218] cpuidle: using governor menu
> > [ 1.302218] No iBFT detected.
> > [ 1.302563] TCP cubic registered
> > [ 1.302563] NET: Registered protocol family 17
> > [ 1.302563] registered taskstats version 1
> > [ 1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09
20:49:22 UTC (1294606162)
> > [ 1.302563] Freeing unused kernel memory: 392k freed
> > [ 1.326091] input: AT Translated Set 2 keyboard as /class/input/input1
> > [ 1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm P001Ist 11 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:00 is registered as cooling_device0
> > [ 1.379078] ACPI: Processor [P001] (supports 8 throttling states)
> > [ 1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm P002Ist 12 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:01 is registered as cooling_device1
> > [ 1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm P003Ist 12 INTL
20051117)
> > [ 1.379078] ACPI: ACPI0007:02 is registered as cooling_device2
> > [ 1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm P004Ist 12 INTL
20051117)
> > [ 1.383072] ACPI: ACPI0007:03 is registered as cooling_device3
> > [ 1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0
> > [ 1.383072] ACPI: Thermal Zone [THRM] (33 C)
> > [ 1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
> > [ 1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2]
-> GSI 22 (level, low) -> IRQ 22
> > [ 1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64
> > [ 1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller
> > [ 1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned
bus number 1
> > [ 1.556086] ehci_hcd 0000:00:04.1: debug port 1
> > [ 1.556086] PCI: cache line size of 32 is not supported by device
0000:00:04.1
> > [ 1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00
> > [ 1.556731] ohci_hcd: 2006 August 04 USB 1.1 ''Open''
Host Controller (OHCI) Driver
> > [ 1.560731] No dock devices found.
> > [ 1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
> > [ 1.564968] usb usb1: configuration #1 chosen from 1 choice
> > [ 1.564995] hub 1-0:1.0: USB hub found
> > [ 1.565003] hub 1-0:1.0: 6 ports detected
> > [ 1.568731] SCSI subsystem initialized
> > [ 1.580731] libata version 3.00 loaded.
> > [ 1.673459] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
> > [ 1.673459] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.673459] usb usb1: Product: EHCI Host Controller
> > [ 1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> > [ 1.673459] usb usb1: SerialNumber: 0000:00:04.1
> > [ 1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
> > [ 1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12]
-> GSI 21 (level, low) -> IRQ 21
> > [ 1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64
> > [ 1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller
> > [ 1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned
bus number 2
> > [ 1.673459] ehci_hcd 0000:00:06.1: debug port 1
> > [ 1.673459] PCI: cache line size of 32 is not supported by device
0000:00:06.1
> > [ 1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800
> > [ 1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
> > [ 1.689512] usb usb2: configuration #1 chosen from 1 choice
> > [ 1.689537] hub 2-0:1.0: USB hub found
> > [ 1.689543] hub 2-0:1.0: 6 ports detected
> > [ 1.792316] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
> > [ 1.792319] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.792321] usb usb2: Product: EHCI Host Controller
> > [ 1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> > [ 1.792324] usb usb2: SerialNumber: 0000:00:06.1
> > [ 1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
> > [ 1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0]
-> GSI 20 (level, low) -> IRQ 20
> > [ 1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64
> > [ 1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller
> > [ 1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned
bus number 3
> > [ 1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000
> > [ 1.855515] usb usb3: configuration #1 chosen from 1 choice
> > [ 1.855538] hub 3-0:1.0: USB hub found
> > [ 1.855544] hub 3-0:1.0: 6 ports detected
> > [ 1.957533] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
> > [ 1.957536] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 1.957538] usb usb3: Product: OHCI Host Controller
> > [ 1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> > [ 1.957541] usb usb3: SerialNumber: 0000:00:04.0
> > [ 1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
> > [ 1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11]
-> GSI 23 (level, low) -> IRQ 23
> > [ 1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64
> > [ 1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller
> > [ 1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned
bus number 4
> > [ 1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000
> > [ 2.015521] usb usb4: configuration #1 chosen from 1 choice
> > [ 2.015543] hub 4-0:1.0: USB hub found
> > [ 2.015549] hub 4-0:1.0: 6 ports detected
> > [ 2.105477] usb 2-3: new high speed USB device using ehci_hcd and
address 2
> > [ 2.117542] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
> > [ 2.117545] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> > [ 2.117547] usb usb4: Product: OHCI Host Controller
> > [ 2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> > [ 2.117550] usb usb4: SerialNumber: 0000:00:06.0
> > [ 2.121473] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
> > [ 2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
> > [ 2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC]
-> GSI 22 (level, low) -> IRQ 22
> > [ 2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> > [ 2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83
has an invalid bInterval 30, changing to 8
> > [ 2.275186] usb 2-3: configuration #1 chosen from 1 choice
> > [ 2.278384] usb 2-3: New USB device found, idVendor=0bda,
idProduct=0152
> > [ 2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> > [ 2.278384] usb 2-3: Product: USB2.0-CRW
> > [ 2.278384] usb 2-3: Manufacturer: Generic
> > [ 2.278384] usb 2-3: SerialNumber: 20060413092100000
> > [ 2.300419] Initializing USB Mass Storage driver...
> > [ 2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3,
addr 00:22:68:3a:6a:b7
> > [ 2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq
gbit lnktim msi desc-v3
> > [ 2.801910] ahci 0000:00:0b.0: version 3.0
> > [ 2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
> > [ 2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0]
-> GSI 21 (level, low) -> IRQ 21
> > [ 2.950553] usb 3-4: new low speed USB device using ohci_hcd and
address 2
> > [ 3.169044] usb 3-4: configuration #1 chosen from 1 choice
> > [ 3.169044] usb 3-4: New USB device found, idVendor=04eb,
idProduct=e030
> > [ 3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> > [ 3.169044] usb 3-4: Product: Media Center Interface
> > [ 3.169044] usb 3-4: Manufacturer: Device
> > [ 3.517035] usb 4-4: new low speed USB device using ohci_hcd and
address 2
> > [ 3.905098] usb 4-4: configuration #1 chosen from 1 choice
> > [ 3.922229] usb 4-4: New USB device found, idVendor=04eb,
idProduct=e033
> > [ 3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> > [ 3.922233] usb 4-4: Product: eHome Infrared Transceiver
> > [ 3.922235] usb 4-4: Manufacturer: Northstar System Corp.
> > [ 3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000
> > [ 3.922229] usbcore: registered new interface driver hiddev
> > [ 3.925096] scsi0 : SCSI emulation for USB Mass Storage devices
> > [ 3.925096] usb-storage: device found at 2
> > [ 3.925096] usb-storage: waiting for device to settle before scanning
> > [ 4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3f impl RAID mode
> > [ 4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum
part
> > [ 4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64
> > [ 4.090205] scsi1 : ahci
> > [ 4.090703] scsi2 : ahci
> > [ 4.090703] scsi3 : ahci
> > [ 4.090703] scsi4 : ahci
> > [ 4.090703] scsi5 : ahci
> > [ 4.090703] scsi6 : ahci
> > [ 4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72100 irq 1274
> > [ 4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72180 irq 1274
> > [ 4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72200 irq 1274
> > [ 4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72280 irq 1274
> > [ 4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72300 irq 1274
> > [ 4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port
0xf9f72380 irq 1274
> > [ 4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [ 4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max
UDMA/133
> > [ 4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth
31/32)
> > [ 4.659284] ata1.00: configured for UDMA/133
> > [ 5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [ 5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
> > [ 5.142984] ata2.00: configured for UDMA/100
> > [ 5.467117] ata3: SATA link down (SStatus 0 SControl 300)
> > [ 6.082425] ata4: SATA link down (SStatus 0 SControl 300)
> > [ 6.405773] ata5: SATA link down (SStatus 0 SControl 300)
> > [ 6.725774] ata6: SATA link down (SStatus 0 SControl 300)
> > [ 7.115290] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ:
0 ANSI: 5
> > [ 7.115290] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH15F EG00 PQ: 0
ANSI: 5
> > [ 7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19
> > [ 7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A]
-> GSI 19 (level, low) -> IRQ 19
> > [ 7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64
> > [ 7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4]
> > [ 7.467156] Driver ''sd'' needs updating - please use
bus_type methods
> > [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> > [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off
> > [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn''t support DPO or FUA
> > [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors
(640135 MB)
> > [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off
> > [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn''t support DPO or FUA
> > [ 7.467156] sda:<4>Driver ''sr'' needs updating
- please use bus_type methods
> > [ 7.484514] sda1 sda2
> > [ 7.484644] sd 1:0:0:0: [sda] Attached SCSI disk
> > [ 7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
> > [ 7.712076] Uniform CD-ROM driver Revision: 3.20
> > [ 7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0
> > [ 7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0
> > [ 7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5
> > [ 9.251645] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00995efa00016c20]
> > [ 11.721065] usb-storage: device scan complete
> > [ 11.721065] scsi 0:0:0:0: Direct-Access Generic- Compact Flash 1.00
PQ: 0 ANSI: 0 CCS
> > [ 12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk
> > [ 12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0
> > [ 17.887389] usbhid: timeout initializing reports
> > [ 17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic
USB2.0-CRW] on usb-0000:00:06.1-3
> > [ 17.887477] usbcore: registered new interface driver usb-storage
> > [ 17.887480] USB Mass Storage support registered.
> > [ 18.452265] input: Device Media Center Interface as
/class/input/input2
> > [ 18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device
Media Center Interface] on usb-0000:00:04.0-4
> > [ 18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media
Center Interface] on usb-0000:00:04.0-4
> > [ 18.483626] usbcore: registered new interface driver usbhid
> > [ 18.483629] usbhid: v2.6:USB HID core driver
> > [ 18.559424] device-mapper: uevent: version 1.0.3
> > [ 18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
initialised: dm-devel@redhat.com
> > [ 18.682017] PM: Starting manual resume from disk
> > [ 18.753394] kjournald starting. Commit interval 5 seconds
> > [ 18.753394] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 19.766553] udevd version 125 started
> > [ 20.072797] input: Power Button (FF) as /class/input/input3
> > [ 20.165593] ACPI: Power Button (FF) [PWRF]
> > [ 20.167337] input: Power Button (CM) as /class/input/input4
> > [ 20.231290] ACPI: Power Button (CM) [PWRB]
> > [ 20.233467] ACPI: WMI: Mapper loaded
> > [ 20.381495] input: PC Speaker as /class/input/input5
> > [ 20.398514] Error: Driver ''pcspkr'' is already
registered, aborting...
> > [ 20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
> > [ 20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA]
-> GSI 20 (level, low) -> IRQ 20
> > [ 20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64
> > [ 22.555585] EXT3 FS on dm-0, internal journal
> > [ 23.159449] loop: module loaded
> > [ 23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1.
Priority:-1 extents:1 across:24023032k
> > xenhost:~#
> > 
> > 
> > 
> > 
> > 
> > From: vchampion@gmail.com
> > Date: Sun, 9 Jan 2011 10:13:30 +0300
> > Subject: Re: [Xen-users] (no subject)
> > To: sawozny@hotmail.com
> > CC: Xen-users@lists.xensource.com
> > 
> > Hi!
> > 
> > 
> > On which state the loading of xen kernel stops? What are you seeing on
display in that moment?
> > Can you put dmesg here?
> > 
> > 
> > 2011/1/9 Scott A. Wozny <sawozny@hotmail.com>
> > 
> > 
> > OK, so after several weeks of trying to get various versions of Xen
running of various distributions, I''m starting to wonder if
I''ve got a hardware compatibility problem and as the system never
really boots with the Xen kernel I''ve got no log files to tell me where
the problem is. I was wondering if there''s a way to compile from source
with debug turned on, particularly for early boot problems, and where those logs
get stored.
> > 
> > In my research, it seems like everyone who has had problems getting
Xen running has fixed it through errors reported during the compile process and
correcting source files to match but I''ve been poring through the
thousands of lines of output produced by the various makes I''ve been
doing in different distro and source combinations and I can''t find
anything that says "You have a problem here". They just compile
cleanly and then don''t boot.
> > 
> > Any and all suggestions would be greatly appreciated.
> > 
> > Thanks,
> > 
> > Scott
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> > 
> > 
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users 
-----Inline Attachment Follows-----


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
 		 	   		  

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Seemingly Similar Threads

Search for more reasonably related threads

Xen users - Jan 2011 - (no subject)

[Xen-users] (no subject)

Re: [Xen-users] (no subject)

RE: [Xen-users] (no subject)

Re: [Xen-users] (no subject)

RE: [Xen-users] (no subject)

Re: [Xen-users] (no subject)

Re: [Xen-users] (no subject)

RE: [Xen-users] (no subject)

RE: [Xen-users] (no subject)

RE: [Xen-users] (no subject)

RE: [Xen-users] (no subject)

RE: [Xen-users] (no subject)

Seemingly Similar Threads