Joe Linoff
2010-Nov-24 22:35 UTC
[Xen-users] which port do i use to connect to my XCP 0.5 server?
Hi Folks: I downloaded and installed XCP 0.5 on a server machine on my network. I would now like to communicate with it using xe but I am told that I need a port number. What port number should I use? I tried looking this up on the xen.org web site: http://wiki.xen.org/xenwiki/Command_Line_Interface. It said to look at chapter 8 in the Administrators guide but that guide is unavailable: http://www.xen.org/products/cloud_support.html. The message says that it is under construction. Where else can I look? Thanks, Joe _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Vern Burke
2010-Nov-24 22:46 UTC
Re: [Xen-users] which port do i use to connect to my XCP 0.5 server?
If you''re using xe from the XCP host''s command line, you don''t need a port. If you''re using xe from a different machine, don''t specify the port unless you have to change it for some off reason, default works fine. Vern Burke SwiftWater Telecom http://www.swiftwatertel.com Xen Cloud Control System http://xencloudcontrol.com On 11/24/2010 5:35 PM, Joe Linoff wrote:> Hi Folks: > > I downloaded and installed XCP 0.5 on a server machine on my network. I > would now like to communicate with it using xe but I am told that I need > a port number. What port number should I use? > > I tried looking this up on the xen.org web site: > http://wiki.xen.org/xenwiki/Command_Line_Interface. It said to look at > chapter 8 in the Administrators guide but that guide is unavailable: > http://www.xen.org/products/cloud_support.html. The message says that it > is under construction. Where else can I look? > > Thanks, > > Joe > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Joe Linoff
2010-Nov-24 22:58 UTC
RE: [Xen-users] which port do i use to connect to my XCP 0.5 server?
Hi Vern: Thank you for your quick reply. I apologize for not being clear in my problem statement. I am able to successfully run xe from the XCP server (no port) but I am unable to run it from the master on the network. The master is not an XCP. It is a CentOS 5.5 workstation. I installed xe on the master and tried to run this: % xe help Failed to contact a running XenServer management agent. Try specifying a server name and port. <snipped> I then tried that but was stumped at the port. After hunting through previous emails I found a reference to port 443 but then I assumed that since it was a default, xe would figure out so I tried this: % xe help -s <IP-address> -pw <password> Error: Connection reset by peer (calling read ) At that point I was stumped. I thought that the problem was occurring because of a bad port. It appears that is not the case. Do you have any idea what the problem might be? Cheers, Joe -----Original Message----- From: Vern Burke [mailto:vburke@skow.net] Sent: Wednesday, November 24, 2010 2:46 PM To: Joe Linoff Cc: xen-users@lists.xensource.com Subject: Re: [Xen-users] which port do i use to connect to my XCP 0.5 server? If you''re using xe from the XCP host''s command line, you don''t need a port. If you''re using xe from a different machine, don''t specify the port unless you have to change it for some off reason, default works fine. Vern Burke SwiftWater Telecom http://www.swiftwatertel.com Xen Cloud Control System http://xencloudcontrol.com On 11/24/2010 5:35 PM, Joe Linoff wrote:> Hi Folks: > > I downloaded and installed XCP 0.5 on a server machine on my network.I> would now like to communicate with it using xe but I am told that Ineed> a port number. What port number should I use? > > I tried looking this up on the xen.org web site: > http://wiki.xen.org/xenwiki/Command_Line_Interface. It said to look at > chapter 8 in the Administrators guide but that guide is unavailable: > http://www.xen.org/products/cloud_support.html. The message says thatit> is under construction. Where else can I look? > > Thanks, > > Joe > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Vern Burke
2010-Nov-24 23:23 UTC
Re: [Xen-users] which port do i use to connect to my XCP 0.5 server?
You didn't specify the user name (-u). You need 3 things to use xe remotely, user name (-u), password (-pw), and server address (-s). Vern Vern Burke, SwiftWater Telecom, http://www.swiftwatertel.com -----Original Message----- From: "Joe Linoff" <jlinoff@tabula.com> Sender: xen-users-bounces@lists.xensource.com Date: Wed, 24 Nov 2010 14:58:14 To: Vern Burke<vburke@skow.net> Cc: <xen-users@lists.xensource.com>; Joe Linoff<jlinoff@tabula.com> Subject: RE: [Xen-users] which port do i use to connect to my XCP 0.5 server? Hi Vern: Thank you for your quick reply. I apologize for not being clear in my problem statement. I am able to successfully run xe from the XCP server (no port) but I am unable to run it from the master on the network. The master is not an XCP. It is a CentOS 5.5 workstation. I installed xe on the master and tried to run this: % xe help Failed to contact a running XenServer management agent. Try specifying a server name and port. <snipped> I then tried that but was stumped at the port. After hunting through previous emails I found a reference to port 443 but then I assumed that since it was a default, xe would figure out so I tried this: % xe help -s <IP-address> -pw <password> Error: Connection reset by peer (calling read ) At that point I was stumped. I thought that the problem was occurring because of a bad port. It appears that is not the case. Do you have any idea what the problem might be? Cheers, Joe -----Original Message----- From: Vern Burke [mailto:vburke@skow.net] Sent: Wednesday, November 24, 2010 2:46 PM To: Joe Linoff Cc: xen-users@lists.xensource.com Subject: Re: [Xen-users] which port do i use to connect to my XCP 0.5 server? If you're using xe from the XCP host's command line, you don't need a port. If you're using xe from a different machine, don't specify the port unless you have to change it for some off reason, default works fine. Vern Burke SwiftWater Telecom http://www.swiftwatertel.com Xen Cloud Control System http://xencloudcontrol.com On 11/24/2010 5:35 PM, Joe Linoff wrote:> Hi Folks: > > I downloaded and installed XCP 0.5 on a server machine on my network.I> would now like to communicate with it using xe but I am told that Ineed> a port number. What port number should I use? > > I tried looking this up on the xen.org web site: > http://wiki.xen.org/xenwiki/Command_Line_Interface. It said to look at > chapter 8 in the Administrators guide but that guide is unavailable: > http://www.xen.org/products/cloud_support.html. The message says thatit> is under construction. Where else can I look? > > Thanks, > > Joe > > > >_______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Joe Linoff
2010-Nov-24 23:28 UTC
RE: [Xen-users] which port do i use to connect to my XCP 0.5 server?
Hi Vern: Thank you. I just tried that: % xe -s <IP address> -u root -pw <password> Error: Connection reset by peer (calling read ) I used the same password that I used to log into the XCP server. BTW, I was just starting to play with XCCS. It looks very interesting. Cheers, Joe -----Original Message----- From: Vern Burke [mailto:vburke@skow.net] Sent: Wednesday, November 24, 2010 3:24 PM To: Joe Linoff; xen-users-bounces@lists.xensource.com Cc: xen-users@lists.xensource.com Subject: Re: [Xen-users] which port do i use to connect to my XCP 0.5 server? You didn''t specify the user name (-u). You need 3 things to use xe remotely, user name (-u), password (-pw), and server address (-s). Vern Vern Burke, SwiftWater Telecom, http://www.swiftwatertel.com -----Original Message----- From: "Joe Linoff" <jlinoff@tabula.com> Sender: xen-users-bounces@lists.xensource.com Date: Wed, 24 Nov 2010 14:58:14 To: Vern Burke<vburke@skow.net> Cc: <xen-users@lists.xensource.com>; Joe Linoff<jlinoff@tabula.com> Subject: RE: [Xen-users] which port do i use to connect to my XCP 0.5 server? Hi Vern: Thank you for your quick reply. I apologize for not being clear in my problem statement. I am able to successfully run xe from the XCP server (no port) but I am unable to run it from the master on the network. The master is not an XCP. It is a CentOS 5.5 workstation. I installed xe on the master and tried to run this: % xe help Failed to contact a running XenServer management agent. Try specifying a server name and port. <snipped> I then tried that but was stumped at the port. After hunting through previous emails I found a reference to port 443 but then I assumed that since it was a default, xe would figure out so I tried this: % xe help -s <IP-address> -pw <password> Error: Connection reset by peer (calling read ) At that point I was stumped. I thought that the problem was occurring because of a bad port. It appears that is not the case. Do you have any idea what the problem might be? Cheers, Joe -----Original Message----- From: Vern Burke [mailto:vburke@skow.net] Sent: Wednesday, November 24, 2010 2:46 PM To: Joe Linoff Cc: xen-users@lists.xensource.com Subject: Re: [Xen-users] which port do i use to connect to my XCP 0.5 server? If you''re using xe from the XCP host''s command line, you don''t need a port. If you''re using xe from a different machine, don''t specify the port unless you have to change it for some off reason, default works fine. Vern Burke SwiftWater Telecom http://www.swiftwatertel.com Xen Cloud Control System http://xencloudcontrol.com On 11/24/2010 5:35 PM, Joe Linoff wrote:> Hi Folks: > > I downloaded and installed XCP 0.5 on a server machine on my network.I> would now like to communicate with it using xe but I am told that Ineed> a port number. What port number should I use? > > I tried looking this up on the xen.org web site: > http://wiki.xen.org/xenwiki/Command_Line_Interface. It said to look at > chapter 8 in the Administrators guide but that guide is unavailable: > http://www.xen.org/products/cloud_support.html. The message says thatit> is under construction. Where else can I look? > > Thanks, > > Joe > > > >_______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Joe Linoff
2010-Nov-24 23:34 UTC
RE: [Xen-users] which port do i use to connect to my XCP 0.5 server?
Hi Vern: Thank you for your help. I managed to get it working. The problem was that my XCP 0.5 server did not have DHCP enabled on the NIC card. There was no way to see it. I had to manually fix it. In the future I will add that to the post-install step. Cheers, Joe -----Original Message----- From: Joe Linoff Sent: Wednesday, November 24, 2010 3:28 PM To: vburke@skow.net; xen-users-bounces@lists.xensource.com Cc: xen-users@lists.xensource.com; Joe Linoff Subject: RE: [Xen-users] which port do i use to connect to my XCP 0.5 server? Hi Vern: Thank you. I just tried that: % xe -s <IP address> -u root -pw <password> Error: Connection reset by peer (calling read ) I used the same password that I used to log into the XCP server. BTW, I was just starting to play with XCCS. It looks very interesting. Cheers, Joe -----Original Message----- From: Vern Burke [mailto:vburke@skow.net] Sent: Wednesday, November 24, 2010 3:24 PM To: Joe Linoff; xen-users-bounces@lists.xensource.com Cc: xen-users@lists.xensource.com Subject: Re: [Xen-users] which port do i use to connect to my XCP 0.5 server? You didn''t specify the user name (-u). You need 3 things to use xe remotely, user name (-u), password (-pw), and server address (-s). Vern Vern Burke, SwiftWater Telecom, http://www.swiftwatertel.com -----Original Message----- From: "Joe Linoff" <jlinoff@tabula.com> Sender: xen-users-bounces@lists.xensource.com Date: Wed, 24 Nov 2010 14:58:14 To: Vern Burke<vburke@skow.net> Cc: <xen-users@lists.xensource.com>; Joe Linoff<jlinoff@tabula.com> Subject: RE: [Xen-users] which port do i use to connect to my XCP 0.5 server? Hi Vern: Thank you for your quick reply. I apologize for not being clear in my problem statement. I am able to successfully run xe from the XCP server (no port) but I am unable to run it from the master on the network. The master is not an XCP. It is a CentOS 5.5 workstation. I installed xe on the master and tried to run this: % xe help Failed to contact a running XenServer management agent. Try specifying a server name and port. <snipped> I then tried that but was stumped at the port. After hunting through previous emails I found a reference to port 443 but then I assumed that since it was a default, xe would figure out so I tried this: % xe help -s <IP-address> -pw <password> Error: Connection reset by peer (calling read ) At that point I was stumped. I thought that the problem was occurring because of a bad port. It appears that is not the case. Do you have any idea what the problem might be? Cheers, Joe -----Original Message----- From: Vern Burke [mailto:vburke@skow.net] Sent: Wednesday, November 24, 2010 2:46 PM To: Joe Linoff Cc: xen-users@lists.xensource.com Subject: Re: [Xen-users] which port do i use to connect to my XCP 0.5 server? If you''re using xe from the XCP host''s command line, you don''t need a port. If you''re using xe from a different machine, don''t specify the port unless you have to change it for some off reason, default works fine. Vern Burke SwiftWater Telecom http://www.swiftwatertel.com Xen Cloud Control System http://xencloudcontrol.com On 11/24/2010 5:35 PM, Joe Linoff wrote:> Hi Folks: > > I downloaded and installed XCP 0.5 on a server machine on my network.I> would now like to communicate with it using xe but I am told that Ineed> a port number. What port number should I use? > > I tried looking this up on the xen.org web site: > http://wiki.xen.org/xenwiki/Command_Line_Interface. It said to look at > chapter 8 in the Administrators guide but that guide is unavailable: > http://www.xen.org/products/cloud_support.html. The message says thatit> is under construction. Where else can I look? > > Thanks, > > Joe > > > >_______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users