Hi there. I''ve got two ethers, eth0 wihich work properly and my DomU goes outside as well, now, I''ve got eth1 and I like to use it to go outside but is not working at this time, I tried adding eth1 to the bridge and changing bridge=eth1 in the DomU config file, or do I have to create another bridge called eth1? eth0 192.168.0.100 - dhcp - Works good. eth1 192.168.0.10 - static - No luck Any adivce? Regards _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Saturday 10 July 2010 21:18:09 Net Warrior wrote:> Hi there. > > I''ve got two ethers, eth0 wihich work properly and my DomU goes outside > as well, now, I''ve got eth1 and I like to use it > to go outside but is not working at this time, I tried adding eth1 to > the bridge and changing bridge=eth1 in the DomU > config file, or do I have to create another bridge called eth1? > > > eth0 192.168.0.100 - dhcp - Works good. > eth1 192.168.0.10 - static - No luck > > Any adivce? > Regards > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >Just create a new bridge. If you replace the networks scripts in xend- config.sxp by one that creates all the necessary bridges, you''re good to go. I replaced it for instance by a script with: /etc/xen/scripts/network-bridge start netdev=eth0 bridge=eth0 /etc/xen/scripts/network-bridge start netdev=eth3 bridge=eth3 Good luck, B. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
can you show me the result of "ifconfig" and "brctl show" in dom0? 2010/7/11 Bart Coninckx <bart.coninckx@telenet.be>> On Saturday 10 July 2010 21:18:09 Net Warrior wrote: > > Hi there. > > > > I''ve got two ethers, eth0 wihich work properly and my DomU goes outside > > as well, now, I''ve got eth1 and I like to use it > > to go outside but is not working at this time, I tried adding eth1 to > > the bridge and changing bridge=eth1 in the DomU > > config file, or do I have to create another bridge called eth1? > > > > > > eth0 192.168.0.100 - dhcp - Works good. > > eth1 192.168.0.10 - static - No luck > > > > Any adivce? > > Regards > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users > > > > Just create a new bridge. If you replace the networks scripts in xend- > config.sxp by one that creates all the necessary bridges, you''re good to > go. > I replaced it for instance by a script with: > > /etc/xen/scripts/network-bridge start netdev=eth0 bridge=eth0 > /etc/xen/scripts/network-bridge start netdev=eth3 bridge=eth3 > > Good luck, > > B. > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
On Monday 12 July 2010 06:49:12 dongkyu lee wrote:> can you show me the result of "ifconfig" and "brctl show" in dom0? > > 2010/7/11 Bart Coninckx <bart.coninckx@telenet.be> > > > On Saturday 10 July 2010 21:18:09 Net Warrior wrote: > > > Hi there. > > > > > > I''ve got two ethers, eth0 wihich work properly and my DomU goes outside > > > as well, now, I''ve got eth1 and I like to use it > > > to go outside but is not working at this time, I tried adding eth1 to > > > the bridge and changing bridge=eth1 in the DomU > > > config file, or do I have to create another bridge called eth1? > > > > > > > > > eth0 192.168.0.100 - dhcp - Works good. > > > eth1 192.168.0.10 - static - No luck > > > > > > Any adivce? > > > Regards > > > > > > _______________________________________________ > > > Xen-users mailing list > > > Xen-users@lists.xensource.com > > > http://lists.xensource.com/xen-users > > > > Just create a new bridge. If you replace the networks scripts in xend- > > config.sxp by one that creates all the necessary bridges, you''re good to > > go. > > I replaced it for instance by a script with: > > > > /etc/xen/scripts/network-bridge start netdev=eth0 bridge=eth0 > > /etc/xen/scripts/network-bridge start netdev=eth3 bridge=eth3 > > > > Good luck, > > > > B. > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users >eth0 Link encap:Ethernet HWaddr 5A:C5:25:7D:C9:21 inet addr:192.168.1.223 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:89067643 errors:0 dropped:0 overruns:0 frame:0 TX packets:46320734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:120328301610 (114754.0 Mb) TX bytes:53225300274 (50759.6 Mb) eth1 Link encap:Ethernet HWaddr D8:D3:85:AC:B5:4C inet addr:10.0.1.11 Bcast:10.0.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:231766273 errors:0 dropped:0 overruns:0 frame:0 TX packets:173523396 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:306828178825 (292614.1 Mb) TX bytes:88373762186 (84279.7 Mb) Interrupt:17 Memory:f2000000-f2012800 eth2 Link encap:Ethernet HWaddr 00:26:55:D4:89:85 inet addr:10.0.3.11 Bcast:10.0.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:230702138 errors:0 dropped:0 overruns:0 frame:0 TX packets:172977643 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:304279985941 (290184.0 Mb) TX bytes:87902038400 (83829.9 Mb) eth3 Link encap:Ethernet HWaddr 00:26:55:D4:89:84 inet addr:192.168.2.11 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:112811 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6335055 (6.0 Mb) TX bytes:748 (748.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:108198 errors:0 dropped:0 overruns:0 frame:0 TX packets:108198 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:334486240 (318.9 Mb) TX bytes:334486240 (318.9 Mb) peth0 Link encap:Ethernet HWaddr D8:D3:85:AC:B5:4A UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:91609768 errors:0 dropped:0 overruns:0 frame:0 TX packets:48562047 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:123261119948 (117550.9 Mb) TX bytes:54831384064 (52291.2 Mb) Interrupt:16 Memory:f4000000-f4012800 peth3 Link encap:Ethernet HWaddr 00:26:55:D4:89:84 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2318290 errors:0 dropped:0 overruns:0 frame:0 TX packets:1090344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3250410094 (3099.8 Mb) TX bytes:94775201 (90.3 Mb) tap0 Link encap:Ethernet HWaddr 76:6F:10:69:5E:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:140811 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 b) TX bytes:19782576 (18.8 Mb) tap1 Link encap:Ethernet HWaddr B2:E3:2C:0E:0B:DC UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:533885 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 b) TX bytes:76711667 (73.1 Mb) tap2 Link encap:Ethernet HWaddr 1A:A0:01:22:D5:93 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:91554 errors:0 dropped:0 overruns:0 frame:0 TX packets:235003 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:7448366 (7.1 Mb) TX bytes:245360214 (233.9 Mb) tap3 Link encap:Ethernet HWaddr 5A:C5:25:7D:C9:21 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:450758 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 b) TX bytes:64714718 (61.7 Mb) vif230.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:65714 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vif233.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:376570 errors:0 dropped:0 overruns:0 frame:0 TX packets:921014 errors:0 dropped:39 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:105814961 (100.9 Mb) TX bytes:142705676 (136.0 Mb) vif236.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:73907 errors:0 dropped:0 overruns:0 frame:0 TX packets:511015 errors:0 dropped:92 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:27847069 (26.5 Mb) TX bytes:72375789 (69.0 Mb) vif238.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4923 errors:0 dropped:0 overruns:0 frame:0 TX packets:145232 errors:0 dropped:111 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:700544 (684.1 Kb) TX bytes:20917378 (19.9 Mb) xen1:/etc/xen/scripts # brctl show bridge name bridge id STP enabled interfaces eth0 8000.5ac5257dc921 no peth0 vif238.0 tap0 tap1 vif233.0 vif236.0 tap3 eth3 8000.002655d48984 no peth3 vif230.0 tap2 _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users