Xen users - Dec 2006 - Problem with WinXP install. Can start but not connect via vnc

Hi,

I run debian etch with xen packages provided by debian. They are running
fine.
Today I tryed to install Windows XP. Here is my config:
***********************************************
kernel = "/usr/lib/xen-3.0.3-1/boot/hvmloader"
builder = ''hvm''
memory = 512
name = "winxp"
vcpus = 1
vif = [ ''type=ioemu, bridge=xenbr0'' ]
disk = [
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'' ]
device_model = ''/usr/lib/xen/bin/qemu-dm''
#cdrom=''/dev/hda''
cdrom=''/vserver/images/domains/winxp/winxp.iso''
ne2000=0
boot=''d''
vif  = [ ''ip=192.168.0.205'' ]
vnc=1
vncviewer=0
***********************************************

When I try to start the domain it seems to run fine:
***********************************************
pfitzner:/etc/xen# xm create winxp2 
Using config file "winxp2".
Started domain winxp
***********************************************

But when I try to connect to the domain via vnc I get the message that
the viewer can''t connect:
***********************************************
pfitzner:/vserver/images/domains# vncviewer pfitzner:17
vncviewer: ConnectToTcpAddr: connect: Connection refused
Unable to connect to VNC server
***********************************************

P.S.:
17 is the ID of the domain and I have a Intel Pentuim D with VT:
pfitzner:/vserver/images/domains# xm dmesg | grep VMX
(XEN) VMXON is done
(XEN) VMXON is done


Does somebody might have a idea what I did do wrong?

Tanks Ben


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Hi Benny,

Benny Pfitzner wrote:
> Hi,
>
> I run debian etch with xen packages provided by debian. They are running
> fine.
> Today I tryed to install Windows XP. Here is my config:
> ***********************************************
> kernel = "/usr/lib/xen-3.0.3-1/boot/hvmloader"
> builder = ''hvm''
> memory = 512
> name = "winxp"
> vcpus = 1
> vif = [ ''type=ioemu, bridge=xenbr0'' ]
> disk = [
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'' ]
> device_model = ''/usr/lib/xen/bin/qemu-dm''
> #cdrom=''/dev/hda''
> cdrom=''/vserver/images/domains/winxp/winxp.iso''
>   
The cdrom= lines had no effect for me, I think they''re obsolete now or 
something, instead I have a disk line that looks like this;

disk = [ ''phy:/dev/sys_vg/windows_os,ioemu:hda,w'', 
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r'' ]
> ne2000=0
> boot=''d''
> vif  = [ ''ip=192.168.0.205'' ]
> vnc=1
> vncviewer=0
>   
Do you not have to set vncviewer to 1 to get it create the window for 
you?  I personally used SDL instead (sdl=1).  You also say your domain 
is 17, I think when I experimented with VNC I found it to create the 
listening port on something like 4017 or whatever.  I used netstat -l to 
find out what port it was actually on.

Ben, lastly, could you check your /var/log/xen folder for error 
messages, specifically check the most recent qemu log.

Thanks,

Ryan.
> ***********************************************
>
> When I try to start the domain it seems to run fine:
> ***********************************************
> pfitzner:/etc/xen# xm create winxp2 
> Using config file "winxp2".
> Started domain winxp
> ***********************************************
>
> But when I try to connect to the domain via vnc I get the message that
> the viewer can''t connect:
> ***********************************************
> pfitzner:/vserver/images/domains# vncviewer pfitzner:17
> vncviewer: ConnectToTcpAddr: connect: Connection refused
> Unable to connect to VNC server
> ***********************************************
>
> P.S.:
> 17 is the ID of the domain and I have a Intel Pentuim D with VT:
> pfitzner:/vserver/images/domains# xm dmesg | grep VMX
> (XEN) VMXON is done
> (XEN) VMXON is done
>
>
> Does somebody might have a idea what I did do wrong?
>
> Tanks Ben
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
>   

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan
Worsley:
> Hi Benny,
> 
> Benny Pfitzner wrote:
> > Hi,
> >
> > I run debian etch with xen packages provided by debian. They are
running
> > fine.
> > Today I tryed to install Windows XP. Here is my config:
> > ***********************************************
> > kernel = "/usr/lib/xen-3.0.3-1/boot/hvmloader"
> > builder = ''hvm''
> > memory = 512
> > name = "winxp"
> > vcpus = 1
> > vif = [ ''type=ioemu, bridge=xenbr0'' ]
> > disk = [
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'' ]
> > device_model = ''/usr/lib/xen/bin/qemu-dm''
> > #cdrom=''/dev/hda''
> > cdrom=''/vserver/images/domains/winxp/winxp.iso''
> >   
> The cdrom= lines had no effect for me, I think they''re obsolete
now or
> something, instead I have a disk line that looks like this;
> 
> disk = [ ''phy:/dev/sys_vg/windows_os,ioemu:hda,w'', 
>
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r'' ]
Thank you very much Ryan,

you are totally right. They changed it in version 3.0.3.

I added vncviewer=1 and sdl=1 to my configfile and started the domain
again.

Then I automatically I got vncviewer running my WinXP install screen.
After formatting the image and so on Windows want''s to reboot.

Since then I don''t have connection to the domain.

I posted my netstat -l output here because I just can''t find the port:
http://pastebin.ca/raw/286397

My logs don''t show anything regarding vnc.
Here is the output of the most recent qemu-log:
*************************************************
domid: 7
qemu: the number of cpus is 1
shared page at pfn:1ffff, mfn: 1d24b
buffered io page at pfn:1fffd, mfn: 1d24d
*************************************************

Here I posted the last couple of lines from the xend.log file.
http://pastebin.ca/286403


Thanks Ben
> 
> > ne2000=0
> > boot=''d''
> > vif  = [ ''ip=192.168.0.205'' ]
> > vnc=1
> > vncviewer=0
> >   
> Do you not have to set vncviewer to 1 to get it create the window for 
> you?  I personally used SDL instead (sdl=1).  You also say your domain 
> is 17, I think when I experimented with VNC I found it to create the 
> listening port on something like 4017 or whatever.  I used netstat -l to 
> find out what port it was actually on.
> 
> Ben, lastly, could you check your /var/log/xen folder for error 
> messages, specifically check the most recent qemu log.
> 
> Thanks,
> 
> Ryan.
> > ***********************************************
> >
> > When I try to start the domain it seems to run fine:
> > ***********************************************
> > pfitzner:/etc/xen# xm create winxp2 
> > Using config file "winxp2".
> > Started domain winxp
> > ***********************************************
> >
> > But when I try to connect to the domain via vnc I get the message that
> > the viewer can''t connect:
> > ***********************************************
> > pfitzner:/vserver/images/domains# vncviewer pfitzner:17
> > vncviewer: ConnectToTcpAddr: connect: Connection refused
> > Unable to connect to VNC server
> > ***********************************************
> >
> > P.S.:
> > 17 is the ID of the domain and I have a Intel Pentuim D with VT:
> > pfitzner:/vserver/images/domains# xm dmesg | grep VMX
> > (XEN) VMXON is done
> > (XEN) VMXON is done
> >
> >
> > Does somebody might have a idea what I did do wrong?
> >
> > Tanks Ben
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> >   
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

> -----Original Message-----
> From: xen-users-bounces@lists.xensource.com 
> [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of 
> Benny Pfitzner
> Sent: 20 December 2006 17:15
> To: xen-users@lists.xensource.com
> Subject: Re: [Xen-users] Problem with WinXP install. Can 
> start but not connect via vnc
> 
> Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan Worsley:
> > Hi Benny,
> > 
> > Benny Pfitzner wrote:
> > > Hi,
> > >
> > > I run debian etch with xen packages provided by debian. 
> They are running
> > > fine.
> > > Today I tryed to install Windows XP. Here is my config:
> > > ***********************************************
> > > kernel = "/usr/lib/xen-3.0.3-1/boot/hvmloader"
> > > builder = ''hvm''
> > > memory = 512
> > > name = "winxp"
> > > vcpus = 1
> > > vif = [ ''type=ioemu, bridge=xenbr0'' ]
> > > disk = [ 
>
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'' ]
> > > device_model = ''/usr/lib/xen/bin/qemu-dm''
> > > #cdrom=''/dev/hda''
> > > cdrom=''/vserver/images/domains/winxp/winxp.iso''
> > >   
> > The cdrom= lines had no effect for me, I think they''re 
> obsolete now or 
> > something, instead I have a disk line that looks like this;
> > 
> > disk = [ ''phy:/dev/sys_vg/windows_os,ioemu:hda,w'', 
> >
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r'' ]
> 
> Thank you very much Ryan,
> 
> you are totally right. They changed it in version 3.0.3.
> 
> I added vncviewer=1 and sdl=1 to my configfile and started the domain
> again.
> 
> Then I automatically I got vncviewer running my WinXP install screen.
> After formatting the image and so on Windows want''s to reboot.
> 
> Since then I don''t have connection to the domain.
> 
> I posted my netstat -l output here because I just can''t find the
port:
> http://pastebin.ca/raw/286397
> 
> My logs don''t show anything regarding vnc.
> Here is the output of the most recent qemu-log:
> *************************************************
> domid: 7
> qemu: the number of cpus is 1
> shared page at pfn:1ffff, mfn: 1d24b
> buffered io page at pfn:1fffd, mfn: 1d24d
> *************************************************
> 
> Here I posted the last couple of lines from the xend.log file.
> http://pastebin.ca/286403
I bet you don''t have a qemu-dm process for some reason... Try starting
the domain from scratch (booting from the hard-disk, not CD-ROM this
time). 

If starting it again doesn''t work, can you show the qemu-log from the
new vm?

--
Mats
> 
> 
> Thanks Ben
> 
> > 
> > > ne2000=0
> > > boot=''d''
> > > vif  = [ ''ip=192.168.0.205'' ]
> > > vnc=1
> > > vncviewer=0
> > >   
> > Do you not have to set vncviewer to 1 to get it create the 
> window for 
> > you?  I personally used SDL instead (sdl=1).  You also say 
> your domain 
> > is 17, I think when I experimented with VNC I found it to 
> create the 
> > listening port on something like 4017 or whatever.  I used 
> netstat -l to 
> > find out what port it was actually on.
> > 
> > Ben, lastly, could you check your /var/log/xen folder for error 
> > messages, specifically check the most recent qemu log.
> > 
> > Thanks,
> > 
> > Ryan.
> > > ***********************************************
> > >
> > > When I try to start the domain it seems to run fine:
> > > ***********************************************
> > > pfitzner:/etc/xen# xm create winxp2 
> > > Using config file "winxp2".
> > > Started domain winxp
> > > ***********************************************
> > >
> > > But when I try to connect to the domain via vnc I get the 
> message that
> > > the viewer can''t connect:
> > > ***********************************************
> > > pfitzner:/vserver/images/domains# vncviewer pfitzner:17
> > > vncviewer: ConnectToTcpAddr: connect: Connection refused
> > > Unable to connect to VNC server
> > > ***********************************************
> > >
> > > P.S.:
> > > 17 is the ID of the domain and I have a Intel Pentuim D with VT:
> > > pfitzner:/vserver/images/domains# xm dmesg | grep VMX
> > > (XEN) VMXON is done
> > > (XEN) VMXON is done
> > >
> > >
> > > Does somebody might have a idea what I did do wrong?
> > >
> > > Tanks Ben
> > >
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@lists.xensource.com
> > > http://lists.xensource.com/xen-users
> > >   
> > 
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
> 
> 
> 


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Am Mittwoch, den 20.12.2006, 18:18 +0100 schrieb Petersson, Mats:

Hello,

I started the domain again with <boot=''c''> and a I saw a
lot of I/O
access. But I still don''t know how to connect via vnc.

Here is my most recent qemu-log:
****************************************
domid: 8
qemu: the number of cpus is 1
shared page at pfn:bfff, mfn: 2172b
buffered io page at pfn:bffd, mfn: 2172d
False I/O request ... in-service already: 0, pvalid: 0, port: 0, data:
0, count: 0, size: 0
****************************************

And here you can find the last couple of lines in my xend.log-file:
http://pastebin.ca/286417

I have a qemu running:
****************************
pfitzner:/var/log/xen# lsof -i|grep qemu
qemu-dm   14352        root    8u  IPv4  26087       TCP
localhost.localdomain:5900 (LISTEN)
pfitzner:/var/log/xen# vncviewer localhost:5900
vncviewer: ConnectToTcpAddr: connect: Connection refused
Unable to connect to VNC server
****************************


Thank you guys very much.

Ben
>  
> > -----Original Message-----
> > From: xen-users-bounces@lists.xensource.com 
> > [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of 
> > Benny Pfitzner
> > Sent: 20 December 2006 17:15
> > To: xen-users@lists.xensource.com
> > Subject: Re: [Xen-users] Problem with WinXP install. Can 
> > start but not connect via vnc
> > 
> > Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan Worsley:
> > > Hi Benny,
> > > 
> > > Benny Pfitzner wrote:
> > > > Hi,
> > > >
> > > > I run debian etch with xen packages provided by debian. 
> > They are running
> > > > fine.
> > > > Today I tryed to install Windows XP. Here is my config:
> > > > ***********************************************
> > > > kernel = "/usr/lib/xen-3.0.3-1/boot/hvmloader"
> > > > builder = ''hvm''
> > > > memory = 512
> > > > name = "winxp"
> > > > vcpus = 1
> > > > vif = [ ''type=ioemu, bridge=xenbr0'' ]
> > > > disk = [ 
> >
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'' ]
> > > > device_model = ''/usr/lib/xen/bin/qemu-dm''
> > > > #cdrom=''/dev/hda''
> > > >
cdrom=''/vserver/images/domains/winxp/winxp.iso''
> > > >   
> > > The cdrom= lines had no effect for me, I think they''re 
> > obsolete now or 
> > > something, instead I have a disk line that looks like this;
> > > 
> > > disk = [
''phy:/dev/sys_vg/windows_os,ioemu:hda,w'',
> > >
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r'' ]
> > 
> > Thank you very much Ryan,
> > 
> > you are totally right. They changed it in version 3.0.3.
> > 
> > I added vncviewer=1 and sdl=1 to my configfile and started the domain
> > again.
> > 
> > Then I automatically I got vncviewer running my WinXP install screen.
> > After formatting the image and so on Windows want''s to
reboot.
> > 
> > Since then I don''t have connection to the domain.
> > 
> > I posted my netstat -l output here because I just can''t find
the port:
> > http://pastebin.ca/raw/286397
> > 
> > My logs don''t show anything regarding vnc.
> > Here is the output of the most recent qemu-log:
> > *************************************************
> > domid: 7
> > qemu: the number of cpus is 1
> > shared page at pfn:1ffff, mfn: 1d24b
> > buffered io page at pfn:1fffd, mfn: 1d24d
> > *************************************************
> > 
> > Here I posted the last couple of lines from the xend.log file.
> > http://pastebin.ca/286403
> 
> I bet you don''t have a qemu-dm process for some reason... Try
starting
> the domain from scratch (booting from the hard-disk, not CD-ROM this
> time). 
> 
> If starting it again doesn''t work, can you show the qemu-log from
the
> new vm?
> 
> --
> Mats
> > 
> > 
> > Thanks Ben
> > 
> > > 
> > > > ne2000=0
> > > > boot=''d''
> > > > vif  = [ ''ip=192.168.0.205'' ]
> > > > vnc=1
> > > > vncviewer=0
> > > >   
> > > Do you not have to set vncviewer to 1 to get it create the 
> > window for 
> > > you?  I personally used SDL instead (sdl=1).  You also say 
> > your domain 
> > > is 17, I think when I experimented with VNC I found it to 
> > create the 
> > > listening port on something like 4017 or whatever.  I used 
> > netstat -l to 
> > > find out what port it was actually on.
> > > 
> > > Ben, lastly, could you check your /var/log/xen folder for error 
> > > messages, specifically check the most recent qemu log.
> > > 
> > > Thanks,
> > > 
> > > Ryan.
> > > > ***********************************************
> > > >
> > > > When I try to start the domain it seems to run fine:
> > > > ***********************************************
> > > > pfitzner:/etc/xen# xm create winxp2 
> > > > Using config file "winxp2".
> > > > Started domain winxp
> > > > ***********************************************
> > > >
> > > > But when I try to connect to the domain via vnc I get the 
> > message that
> > > > the viewer can''t connect:
> > > > ***********************************************
> > > > pfitzner:/vserver/images/domains# vncviewer pfitzner:17
> > > > vncviewer: ConnectToTcpAddr: connect: Connection refused
> > > > Unable to connect to VNC server
> > > > ***********************************************
> > > >
> > > > P.S.:
> > > > 17 is the ID of the domain and I have a Intel Pentuim D with
VT:
> > > > pfitzner:/vserver/images/domains# xm dmesg | grep VMX
> > > > (XEN) VMXON is done
> > > > (XEN) VMXON is done
> > > >
> > > >
> > > > Does somebody might have a idea what I did do wrong?
> > > >
> > > > Tanks Ben
> > > >
> > > >
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@lists.xensource.com
> > > > http://lists.xensource.com/xen-users
> > > >   
> > > 
> > > 
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@lists.xensource.com
> > > http://lists.xensource.com/xen-users
> > 
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> > 
> > 
> > 
> 

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Benny Pfitzner wrote:
> Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan Worsley:
>   
>> Hi Benny,
>>
>> Benny Pfitzner wrote:
>>     
>>> Hi,
>>>
>>> I run debian etch with xen packages provided by debian. They are
running
>>> fine.
>>> Today I tryed to install Windows XP. Here is my config:
>>> ***********************************************
>>> kernel = "/usr/lib/xen-3.0.3-1/boot/hvmloader"
>>> builder = ''hvm''
>>> memory = 512
>>> name = "winxp"
>>> vcpus = 1
>>> vif = [ ''type=ioemu, bridge=xenbr0'' ]
>>> disk = [
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'' ]
>>> device_model = ''/usr/lib/xen/bin/qemu-dm''
>>> #cdrom=''/dev/hda''
>>> cdrom=''/vserver/images/domains/winxp/winxp.iso''
>>>   
>>>       
>> The cdrom= lines had no effect for me, I think they''re
obsolete now or
>> something, instead I have a disk line that looks like this;
>>
>> disk = [ ''phy:/dev/sys_vg/windows_os,ioemu:hda,w'', 
>>
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r'' ]
>>     
>
> Thank you very much Ryan,
>
> you are totally right. They changed it in version 3.0.3.
>
> I added vncviewer=1 and sdl=1 to my configfile and started the domain
> again.
>   
You''re welcome man.  I think it''s intended that you use EITHER
the vnc
viewer OR the SDL viewer and not both simultaneously.  Maybe someone can 
clear up the technicality of this?
> Then I automatically I got vncviewer running my WinXP install screen.
> After formatting the image and so on Windows want''s to reboot.
>
> Since then I don''t have connection to the domain.
>   
Is it the VNC viewer you''ve got or an SDL viewer, the top of the window
should give it away.  You say it reboots but you have no connection to 
the domain, this may be something to do with having both vnc and sdl on 
at the same time.  In my experience with SDL, you get a new window pop 
up after the reboot.  Not so sure with VNC though.
> I posted my netstat -l output here because I just can''t find the
port:
> http://pastebin.ca/raw/286397
>   
The only line pertaining to VNC looks like this one;

tcp        0      0 localhost.localdom:5900 *:*                     LISTEN



But that said, this is more than likely just the vncserver you have 
running on Dom0.  So it looks to me that perhaps having both vnc and sdl 
enabled might be causing problems!
> My logs don''t show anything regarding vnc.
> Here is the output of the most recent qemu-log:
> *************************************************
> domid: 7
> qemu: the number of cpus is 1
> shared page at pfn:1ffff, mfn: 1d24b
> buffered io page at pfn:1fffd, mfn: 1d24d
> *************************************************
>
> Here I posted the last couple of lines from the xend.log file.
> http://pastebin.ca/286403
>   
This all looks fine to me.

Thanks,

Ryan.
>
> Thanks Ben
>
>   
>>> ne2000=0
>>> boot=''d''
>>> vif  = [ ''ip=192.168.0.205'' ]
>>> vnc=1
>>> vncviewer=0
>>>   
>>>       
>> Do you not have to set vncviewer to 1 to get it create the window for 
>> you?  I personally used SDL instead (sdl=1).  You also say your domain 
>> is 17, I think when I experimented with VNC I found it to create the 
>> listening port on something like 4017 or whatever.  I used netstat -l
to
>> find out what port it was actually on.
>>
>> Ben, lastly, could you check your /var/log/xen folder for error 
>> messages, specifically check the most recent qemu log.
>>
>> Thanks,
>>
>> Ryan.
>>     
>>> ***********************************************
>>>
>>> When I try to start the domain it seems to run fine:
>>> ***********************************************
>>> pfitzner:/etc/xen# xm create winxp2 
>>> Using config file "winxp2".
>>> Started domain winxp
>>> ***********************************************
>>>
>>> But when I try to connect to the domain via vnc I get the message
that
>>> the viewer can''t connect:
>>> ***********************************************
>>> pfitzner:/vserver/images/domains# vncviewer pfitzner:17
>>> vncviewer: ConnectToTcpAddr: connect: Connection refused
>>> Unable to connect to VNC server
>>> ***********************************************
>>>
>>> P.S.:
>>> 17 is the ID of the domain and I have a Intel Pentuim D with VT:
>>> pfitzner:/vserver/images/domains# xm dmesg | grep VMX
>>> (XEN) VMXON is done
>>> (XEN) VMXON is done
>>>
>>>
>>> Does somebody might have a idea what I did do wrong?
>>>
>>> Tanks Ben
>>>
>>>
>>> _______________________________________________
>>> Xen-users mailing list
>>> Xen-users@lists.xensource.com
>>> http://lists.xensource.com/xen-users
>>>   
>>>       
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@lists.xensource.com
>> http://lists.xensource.com/xen-users
>>     
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
>   

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Thank you guys very very much for your patience and time.
I got winXP setup running with sdl.
I need to figure out why vnc isn''t working but that''s another
story.

Thank again

Ben

Am Mittwoch, den 20.12.2006, 19:15 +0000 schrieb Ryan
Worsley:
> Benny Pfitzner wrote:
> > Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan Worsley:
> >   
> >> Hi Benny,
> >>
> >> Benny Pfitzner wrote:
> >>     
> >>> Hi,
> >>>
> >>> I run debian etch with xen packages provided by debian. They
are running
> >>> fine.
> >>> Today I tryed to install Windows XP. Here is my config:
> >>> ***********************************************
> >>> kernel = "/usr/lib/xen-3.0.3-1/boot/hvmloader"
> >>> builder = ''hvm''
> >>> memory = 512
> >>> name = "winxp"
> >>> vcpus = 1
> >>> vif = [ ''type=ioemu, bridge=xenbr0'' ]
> >>> disk = [
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'' ]
> >>> device_model = ''/usr/lib/xen/bin/qemu-dm''
> >>> #cdrom=''/dev/hda''
> >>>
cdrom=''/vserver/images/domains/winxp/winxp.iso''
> >>>   
> >>>       
> >> The cdrom= lines had no effect for me, I think they''re
obsolete now or
> >> something, instead I have a disk line that looks like this;
> >>
> >> disk = [
''phy:/dev/sys_vg/windows_os,ioemu:hda,w'',
> >>
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r'' ]
> >>     
> >
> > Thank you very much Ryan,
> >
> > you are totally right. They changed it in version 3.0.3.
> >
> > I added vncviewer=1 and sdl=1 to my configfile and started the domain
> > again.
> >   
> 
> You''re welcome man.  I think it''s intended that you use
EITHER the vnc
> viewer OR the SDL viewer and not both simultaneously.  Maybe someone can 
> clear up the technicality of this?
> > Then I automatically I got vncviewer running my WinXP install screen.
> > After formatting the image and so on Windows want''s to
reboot.
> >
> > Since then I don''t have connection to the domain.
> >   
> Is it the VNC viewer you''ve got or an SDL viewer, the top of the
window
> should give it away.  You say it reboots but you have no connection to 
> the domain, this may be something to do with having both vnc and sdl on 
> at the same time.  In my experience with SDL, you get a new window pop 
> up after the reboot.  Not so sure with VNC though.
> > I posted my netstat -l output here because I just can''t find
the port:
> > http://pastebin.ca/raw/286397
> >   
> 
> The only line pertaining to VNC looks like this one;
> 
> tcp        0      0 localhost.localdom:5900 *:*                     LISTEN
> 
> 
> 
> But that said, this is more than likely just the vncserver you have 
> running on Dom0.  So it looks to me that perhaps having both vnc and sdl 
> enabled might be causing problems!
> > My logs don''t show anything regarding vnc.
> > Here is the output of the most recent qemu-log:
> > *************************************************
> > domid: 7
> > qemu: the number of cpus is 1
> > shared page at pfn:1ffff, mfn: 1d24b
> > buffered io page at pfn:1fffd, mfn: 1d24d
> > *************************************************
> >
> > Here I posted the last couple of lines from the xend.log file.
> > http://pastebin.ca/286403
> >   
> This all looks fine to me.
> 
> Thanks,
> 
> Ryan.
> >
> > Thanks Ben
> >
> >   
> >>> ne2000=0
> >>> boot=''d''
> >>> vif  = [ ''ip=192.168.0.205'' ]
> >>> vnc=1
> >>> vncviewer=0
> >>>   
> >>>       
> >> Do you not have to set vncviewer to 1 to get it create the window
for
> >> you?  I personally used SDL instead (sdl=1).  You also say your
domain
> >> is 17, I think when I experimented with VNC I found it to create
the
> >> listening port on something like 4017 or whatever.  I used netstat
-l to
> >> find out what port it was actually on.
> >>
> >> Ben, lastly, could you check your /var/log/xen folder for error 
> >> messages, specifically check the most recent qemu log.
> >>
> >> Thanks,
> >>
> >> Ryan.
> >>     
> >>> ***********************************************
> >>>
> >>> When I try to start the domain it seems to run fine:
> >>> ***********************************************
> >>> pfitzner:/etc/xen# xm create winxp2 
> >>> Using config file "winxp2".
> >>> Started domain winxp
> >>> ***********************************************
> >>>
> >>> But when I try to connect to the domain via vnc I get the
message that
> >>> the viewer can''t connect:
> >>> ***********************************************
> >>> pfitzner:/vserver/images/domains# vncviewer pfitzner:17
> >>> vncviewer: ConnectToTcpAddr: connect: Connection refused
> >>> Unable to connect to VNC server
> >>> ***********************************************
> >>>
> >>> P.S.:
> >>> 17 is the ID of the domain and I have a Intel Pentuim D with
VT:
> >>> pfitzner:/vserver/images/domains# xm dmesg | grep VMX
> >>> (XEN) VMXON is done
> >>> (XEN) VMXON is done
> >>>
> >>>
> >>> Does somebody might have a idea what I did do wrong?
> >>>
> >>> Tanks Ben
> >>>
> >>>
> >>> _______________________________________________
> >>> Xen-users mailing list
> >>> Xen-users@lists.xensource.com
> >>> http://lists.xensource.com/xen-users
> >>>   
> >>>       
> >> _______________________________________________
> >> Xen-users mailing list
> >> Xen-users@lists.xensource.com
> >> http://lists.xensource.com/xen-users
> >>     
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> >   

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Hi Benny,

i''m not sure that vnc ist working with hvm (MS) you do not have in an 
standard installation an vncserver... but can you ping your guest?

(vnc would run with an Linux hvm guest because you have here in many
OS''s
an vncserver allready as default)

you should connect to the guest and not to localhost. I use RDP to connect 
to my XP session, from Linux someting like:

rdesktop -g 1200x1024 -a 24 -k de 10.0.0.2

10.0.0.2 is my XP guest.

Gerhard

xen-users-bounces@lists.xensource.com wrote on 20.12.2006 18:44:53:
> Am Mittwoch, den 20.12.2006, 18:18 +0100 schrieb Petersson, Mats:
> 
> Hello,
> 
> I started the domain again with <boot=''c''> and a I
saw a lot of I/O
> access. But I still don''t know how to connect via vnc.
> 
> Here is my most recent qemu-log:
> ****************************************
> domid: 8
> qemu: the number of cpus is 1
> shared page at pfn:bfff, mfn: 2172b
> buffered io page at pfn:bffd, mfn: 2172d
> False I/O request ... in-service already: 0, pvalid: 0, port: 0, data:
> 0, count: 0, size: 0
> ****************************************
> 
> And here you can find the last couple of lines in my xend.log-file:
> http://pastebin.ca/286417
> 
> I have a qemu running:
> ****************************
> pfitzner:/var/log/xen# lsof -i|grep qemu
> qemu-dm   14352        root    8u  IPv4  26087       TCP
> localhost.localdomain:5900 (LISTEN)
> pfitzner:/var/log/xen# vncviewer localhost:5900
> vncviewer: ConnectToTcpAddr: connect: Connection refused
> Unable to connect to VNC server
> ****************************
> 
> 
> Thank you guys very much.
> 
> Ben
> 
> > 
> > > -----Original Message-----
> > > From: xen-users-bounces@lists.xensource.com 
> > > [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of 
> > > Benny Pfitzner
> > > Sent: 20 December 2006 17:15
> > > To: xen-users@lists.xensource.com
> > > Subject: Re: [Xen-users] Problem with WinXP install. Can 
> > > start but not connect via vnc
> > > 
> > > Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan Worsley:
> > > > Hi Benny,
> > > > 
> > > > Benny Pfitzner wrote:
> > > > > Hi,
> > > > >
> > > > > I run debian etch with xen packages provided by debian.
> > > They are running
> > > > > fine.
> > > > > Today I tryed to install Windows XP. Here is my config:
> > > > > ***********************************************
> > > > > kernel =
"/usr/lib/xen-3.0.3-1/boot/hvmloader"
> > > > > builder = ''hvm''
> > > > > memory = 512
> > > > > name = "winxp"
> > > > > vcpus = 1
> > > > > vif = [ ''type=ioemu, bridge=xenbr0'' ]
> > > > > disk = [ 
> > >
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w'' ]
> > > > > device_model =
''/usr/lib/xen/bin/qemu-dm''
> > > > > #cdrom=''/dev/hda''
> > > > >
cdrom=''/vserver/images/domains/winxp/winxp.iso''
> > > > > 
> > > > The cdrom= lines had no effect for me, I think
they''re
> > > obsolete now or 
> > > > something, instead I have a disk line that looks like this;
> > > > 
> > > > disk = [
''phy:/dev/sys_vg/windows_os,ioemu:hda,w'',
> > > >
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r'' ]
> > > 
> > > Thank you very much Ryan,
> > > 
> > > you are totally right. They changed it in version 3.0.3.
> > > 
> > > I added vncviewer=1 and sdl=1 to my configfile and started the 
domain
> > > again.
> > > 
> > > Then I automatically I got vncviewer running my WinXP install 
screen.
> > > After formatting the image and so on Windows want''s to
reboot.
> > > 
> > > Since then I don''t have connection to the domain.
> > > 
> > > I posted my netstat -l output here because I just can''t
find the
port:
> > > http://pastebin.ca/raw/286397
> > > 
> > > My logs don''t show anything regarding vnc.
> > > Here is the output of the most recent qemu-log:
> > > *************************************************
> > > domid: 7
> > > qemu: the number of cpus is 1
> > > shared page at pfn:1ffff, mfn: 1d24b
> > > buffered io page at pfn:1fffd, mfn: 1d24d
> > > *************************************************
> > > 
> > > Here I posted the last couple of lines from the xend.log file.
> > > http://pastebin.ca/286403
> > 
> > I bet you don''t have a qemu-dm process for some reason... Try
starting
> > the domain from scratch (booting from the hard-disk, not CD-ROM this
> > time). 
> > 
> > If starting it again doesn''t work, can you show the qemu-log
from the
> > new vm?
> > 
> > --
> > Mats
> > > 
> > > 
> > > Thanks Ben
> > > 
> > > > 
> > > > > ne2000=0
> > > > > boot=''d''
> > > > > vif  = [ ''ip=192.168.0.205'' ]
> > > > > vnc=1
> > > > > vncviewer=0
> > > > > 
> > > > Do you not have to set vncviewer to 1 to get it create the 
> > > window for 
> > > > you?  I personally used SDL instead (sdl=1).  You also say 
> > > your domain 
> > > > is 17, I think when I experimented with VNC I found it to 
> > > create the 
> > > > listening port on something like 4017 or whatever.  I used 
> > > netstat -l to 
> > > > find out what port it was actually on.
> > > > 
> > > > Ben, lastly, could you check your /var/log/xen folder for
error
> > > > messages, specifically check the most recent qemu log.
> > > > 
> > > > Thanks,
> > > > 
> > > > Ryan.
> > > > > ***********************************************
> > > > >
> > > > > When I try to start the domain it seems to run fine:
> > > > > ***********************************************
> > > > > pfitzner:/etc/xen# xm create winxp2 
> > > > > Using config file "winxp2".
> > > > > Started domain winxp
> > > > > ***********************************************
> > > > >
> > > > > But when I try to connect to the domain via vnc I get
the
> > > message that
> > > > > the viewer can''t connect:
> > > > > ***********************************************
> > > > > pfitzner:/vserver/images/domains# vncviewer pfitzner:17
> > > > > vncviewer: ConnectToTcpAddr: connect: Connection
refused
> > > > > Unable to connect to VNC server
> > > > > ***********************************************
> > > > >
> > > > > P.S.:
> > > > > 17 is the ID of the domain and I have a Intel Pentuim D
with VT:
> > > > > pfitzner:/vserver/images/domains# xm dmesg | grep VMX
> > > > > (XEN) VMXON is done
> > > > > (XEN) VMXON is done
> > > > >
> > > > >
> > > > > Does somebody might have a idea what I did do wrong?
> > > > >
> > > > > Tanks Ben
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Xen-users mailing list
> > > > > Xen-users@lists.xensource.com
> > > > > http://lists.xensource.com/xen-users
> > > > > 
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@lists.xensource.com
> > > > http://lists.xensource.com/xen-users
> > > 
> > > 
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@lists.xensource.com
> > > http://lists.xensource.com/xen-users
> > > 
> > > 
> > > 
> > 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

Hi, I''ve a problem: I''ve the same config file, xen 3.0.3
installed from
source.
I can start windows in a domU but I can''t see it with graphic.

If I type "xm list" I can see it in the list and the time is not 0 (i
think
that a number that is not 0 it''s ok... isn''t it?).

if I start it with qemu it work fine but without network (in the hardware
list thereis a network card).

Here I posted a log of qemu-dm:

domid: 5
qemu: the number of cpus is 1
shared page at pfn:1ffff, mfn: 1c10f
buffered io page at pfn:1fffd, mfn: 1c111
False I/O request ... in-service already: 0, pvalid: 0, port: 0, data: 0,
count:
 0, size: 0


And my config file is:

kernel = "/usr/lib/xen/boot/hvmloader"
builder = ''hvm''
memory = 512
name = "winxp"
vcpus = 1
vif = [ '''' ]
disk = [ ''file:/vserver/images/winxp.img,ioemu:hda,w'' ]
device_model = ''/usr/lib/xen/bin/qemu-dm''
cdrom=''/dev/hdd''
ne2000=0
boot=''c''


I''ve installed Windows with qemu but also if I try to install it with
xen
and a blank image file, it doesn''t boot...

If compiled the kernel with TUN/TAP module, any support for graphic card ad
IDE/SATA controller (they work fine).

Any suggestion?

CPU is Athlon 3800+ X2 with AMD-V, MB is ASUS M2V.

Thanks


--------- Original Message --------
From: Gerhard Possler <gerhard.possler@de.ibm.com>
To: Benny Pfitzner <pfitzner-lug@gmx.net>
Cc: xen-users@lists.xensource.com
Subject: RE: [Xen-users] Problem with WinXP install. Can start but
not	connect via vnc
Date: 21/12/06 12:23
> 
> Hi Benny,
> 
> i''m not sure that vnc ist working with
> hvm (MS) you do not have in an standard installation an vncserver... but
> can you ping your guest?
> 
> (vnc would run with an Linux hvm guest
> because you have here in many OS''s an vncserver allready as
default)
> 
> you should connect to the guest and
> not to localhost. I use RDP to connect to my XP session, from Linux
someting
> like:
> 
> rdesktop -g 1200x1024 -a 24 -k de 10.0.0.2
> 
> 10.0.0.2 is my XP guest.
> 
> Gerhard
> 
> xen-users-bounces@lists.xensource.com wrote on 20.12.2006
> 18:44:53:
> 
> &gt; Am Mittwoch, den 20.12.2006, 18:18 +0100 schrieb Petersson, Mats:
> &gt; 
> &gt; Hello,
> &gt; 
> &gt; I started the domain again with
&lt;boot=''c''&gt; and a I saw a lot
> of I/O
> &gt; access. But I still don''t know how to connect via vnc.
> &gt; 
> &gt; Here is my most recent qemu-log:
> &gt; ****************************************
> &gt; domid: 8
> &gt; qemu: the number of cpus is 1
> &gt; shared page at pfn:bfff, mfn: 2172b
> &gt; buffered io page at pfn:bffd, mfn: 2172d
> &gt; False I/O request ... in-service already: 0, pvalid: 0, port: 0,
data:
> &gt; 0, count: 0, size: 0
> &gt; ****************************************
> &gt; 
> &gt; And here you can find the last couple of lines in my
xend.log-file:
> &gt; http://pastebin.ca/286417
> &gt; 
> &gt; I have a qemu running:
> &gt; ****************************
> &gt; pfitzner:/var/log/xen# lsof -i|grep qemu
> &gt; qemu-dm &nbsp; 14352 &nbsp; &nbsp; &nbsp;
&nbsp;root &nbsp; &nbsp;8u
> &nbsp;IPv4 &nbsp;26087 &nbsp; &nbsp; &nbsp; TCP
> &gt; localhost.localdomain:5900 (LISTEN)
> &gt; pfitzner:/var/log/xen# vncviewer localhost:5900
> &gt; vncviewer: ConnectToTcpAddr: connect: Connection refused
> &gt; Unable to connect to VNC server
> &gt; ****************************
> &gt; 
> &gt; 
> &gt; Thank you guys very much.
> &gt; 
> &gt; Ben
> &gt; 
> &gt; &gt; &nbsp;
> &gt; &gt; &gt; -----Original Message-----
> &gt; &gt; &gt; From: xen-users-bounces@lists.xensource.com 
> &gt; &gt; &gt; [mailto:xen-users-bounces@lists.xensource.com]
On Behalf
> Of 
> &gt; &gt; &gt; Benny Pfitzner
> &gt; &gt; &gt; Sent: 20 December 2006 17:15
> &gt; &gt; &gt; To: xen-users@lists.xensource.com
> &gt; &gt; &gt; Subject: Re: [Xen-users] Problem with WinXP
install. Can
> 
> &gt; &gt; &gt; start but not connect via vnc
> &gt; &gt; &gt; 
> &gt; &gt; &gt; Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb
Ryan
Worsley:
> &gt; &gt; &gt; &gt; Hi Benny,
> &gt; &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt; Benny Pfitzner wrote:
> &gt; &gt; &gt; &gt; &gt; Hi,
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt; I run debian etch with xen
packages provided by
> debian. 
> &gt; &gt; &gt; They are running
> &gt; &gt; &gt; &gt; &gt; fine.
> &gt; &gt; &gt; &gt; &gt; Today I tryed to install
Windows XP. Here is my
> config:
> &gt; &gt; &gt; &gt; &gt;
***********************************************
> &gt; &gt; &gt; &gt; &gt; kernel
&quot;/usr/lib/xen-3.0.3-1/boot/hvmloader&quot;
> &gt; &gt; &gt; &gt; &gt; builder =
''hvm''
> &gt; &gt; &gt; &gt; &gt; memory = 512
> &gt; &gt; &gt; &gt; &gt; name =
&quot;winxp&quot;
> &gt; &gt; &gt; &gt; &gt; vcpus = 1
> &gt; &gt; &gt; &gt; &gt; vif = [ ''type=ioemu,
bridge=xenbr0'' ]
> &gt; &gt; &gt; &gt; &gt; disk = [ 
> &gt; &gt; &gt;
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w''
> ]
> &gt; &gt; &gt; &gt; &gt; device_model =
''/usr/lib/xen/bin/qemu-dm''
> &gt; &gt; &gt; &gt; &gt;
#cdrom=''/dev/hda''
> &gt; &gt; &gt; &gt; &gt;
cdrom=''/vserver/images/domains/winxp/winxp.iso''
> &gt; &gt; &gt; &gt; &gt; &nbsp; 
> &gt; &gt; &gt; &gt; The cdrom= lines had no effect for me,
I think they''re
> 
> &gt; &gt; &gt; obsolete now or 
> &gt; &gt; &gt; &gt; something, instead I have a disk line
that looks like
> this;
> &gt; &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt; disk = [
''phy:/dev/sys_vg/windows_os,ioemu:hda,w'',
> 
> &gt; &gt; &gt; &gt;
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r''
> ]
> &gt; &gt; &gt; 
> &gt; &gt; &gt; Thank you very much Ryan,
> &gt; &gt; &gt; 
> &gt; &gt; &gt; you are totally right. They changed it in
version 3.0.3.
> &gt; &gt; &gt; 
> &gt; &gt; &gt; I added vncviewer=1 and sdl=1 to my configfile
and started
> the domain
> &gt; &gt; &gt; again.
> &gt; &gt; &gt; 
> &gt; &gt; &gt; Then I automatically I got vncviewer running my
WinXP
install
> screen.
> &gt; &gt; &gt; After formatting the image and so on Windows
want''s to
reboot.
> &gt; &gt; &gt; 
> &gt; &gt; &gt; Since then I don''t have connection to
the domain.
> &gt; &gt; &gt; 
> &gt; &gt; &gt; I posted my netstat -l output here because I
just can''t
> find the port:
> &gt; &gt; &gt; http://pastebin.ca/raw/286397
> &gt; &gt; &gt; 
> &gt; &gt; &gt; My logs don''t show anything regarding
vnc.
> &gt; &gt; &gt; Here is the output of the most recent qemu-log:
> &gt; &gt; &gt;
*************************************************
> &gt; &gt; &gt; domid: 7
> &gt; &gt; &gt; qemu: the number of cpus is 1
> &gt; &gt; &gt; shared page at pfn:1ffff, mfn: 1d24b
> &gt; &gt; &gt; buffered io page at pfn:1fffd, mfn: 1d24d
> &gt; &gt; &gt;
*************************************************
> &gt; &gt; &gt; 
> &gt; &gt; &gt; Here I posted the last couple of lines from the
xend.log
> file.
> &gt; &gt; &gt; http://pastebin.ca/286403
> &gt; &gt; 
> &gt; &gt; I bet you don''t have a qemu-dm process for some
reason... Try
> starting
> &gt; &gt; the domain from scratch (booting from the hard-disk, not
CD-ROM
> this
> &gt; &gt; time). 
> &gt; &gt; 
> &gt; &gt; If starting it again doesn''t work, can you show
the qemu-log
> from the
> &gt; &gt; new vm?
> &gt; &gt; 
> &gt; &gt; --
> &gt; &gt; Mats
> &gt; &gt; &gt; 
> &gt; &gt; &gt; 
> &gt; &gt; &gt; Thanks Ben
> &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt; &gt; ne2000=0
> &gt; &gt; &gt; &gt; &gt; boot=''d''
> &gt; &gt; &gt; &gt; &gt; vif &nbsp;= [
''ip=192.168.0.205'' ]
> &gt; &gt; &gt; &gt; &gt; vnc=1
> &gt; &gt; &gt; &gt; &gt; vncviewer=0
> &gt; &gt; &gt; &gt; &gt; &nbsp; 
> &gt; &gt; &gt; &gt; Do you not have to set vncviewer to 1
to get it create
> the 
> &gt; &gt; &gt; window for 
> &gt; &gt; &gt; &gt; you? &nbsp;I personally used SDL
instead (sdl=1).
&nbsp;You
> also say 
> &gt; &gt; &gt; your domain 
> &gt; &gt; &gt; &gt; is 17, I think when I experimented with
VNC I found
> it to 
> &gt; &gt; &gt; create the 
> &gt; &gt; &gt; &gt; listening port on something like 4017
or whatever.
> &nbsp;I used 
> &gt; &gt; &gt; netstat -l to 
> &gt; &gt; &gt; &gt; find out what port it was actually on.
> &gt; &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt; Ben, lastly, could you check your
/var/log/xen folder
> for error 
> &gt; &gt; &gt; &gt; messages, specifically check the most
recent qemu log.
> &gt; &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt; Thanks,
> &gt; &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt; Ryan.
> &gt; &gt; &gt; &gt; &gt;
***********************************************
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt; When I try to start the domain
it seems to run
> fine:
> &gt; &gt; &gt; &gt; &gt;
***********************************************
> &gt; &gt; &gt; &gt; &gt; pfitzner:/etc/xen# xm create
winxp2
> &gt; &gt; &gt; &gt; &gt; Using config file
&quot;winxp2&quot;.
> &gt; &gt; &gt; &gt; &gt; Started domain winxp
> &gt; &gt; &gt; &gt; &gt;
***********************************************
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt; But when I try to connect to
the domain via vnc
> I get the 
> &gt; &gt; &gt; message that
> &gt; &gt; &gt; &gt; &gt; the viewer can''t
connect:
> &gt; &gt; &gt; &gt; &gt;
***********************************************
> &gt; &gt; &gt; &gt; &gt;
pfitzner:/vserver/images/domains# vncviewer
pfitzner:17
> &gt; &gt; &gt; &gt; &gt; vncviewer: ConnectToTcpAddr:
connect: Connection
> refused
> &gt; &gt; &gt; &gt; &gt; Unable to connect to VNC
server
> &gt; &gt; &gt; &gt; &gt;
***********************************************
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt; P.S.:
> &gt; &gt; &gt; &gt; &gt; 17 is the ID of the domain and
I have a Intel
> Pentuim D with VT:
> &gt; &gt; &gt; &gt; &gt;
pfitzner:/vserver/images/domains# xm dmesg | grep
> VMX
> &gt; &gt; &gt; &gt; &gt; (XEN) VMXON is done
> &gt; &gt; &gt; &gt; &gt; (XEN) VMXON is done
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt; Does somebody might have a
idea what I did do
> wrong?
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt; Tanks Ben
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt;
> &gt; &gt; &gt; &gt; &gt;
_______________________________________________
> &gt; &gt; &gt; &gt; &gt; Xen-users mailing list
> &gt; &gt; &gt; &gt; &gt; Xen-users@lists.xensource.com
> &gt; &gt; &gt; &gt; &gt;
http://lists.xensource.com/xen-users
> &gt; &gt; &gt; &gt; &gt; &nbsp; 
> &gt; &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt; 
> &gt; &gt; &gt; &gt;
_______________________________________________
> &gt; &gt; &gt; &gt; Xen-users mailing list
> &gt; &gt; &gt; &gt; Xen-users@lists.xensource.com
> &gt; &gt; &gt; &gt; http://lists.xensource.com/xen-users
> &gt; &gt; &gt; 
> &gt; &gt; &gt; 
> &gt; &gt; &gt; _______________________________________________
> &gt; &gt; &gt; Xen-users mailing list
> &gt; &gt; &gt; Xen-users@lists.xensource.com
> &gt; &gt; &gt; http://lists.xensource.com/xen-users
> &gt; &gt; &gt; 
> &gt; &gt; &gt; 
> &gt; &gt; &gt; 
> &gt; &gt; 
> &gt; 
> &gt; 
> &gt; _______________________________________________
> &gt; Xen-users mailing list
> &gt; Xen-users@lists.xensource.com
> &gt; http://lists.xensource.com/xen-users
> 
> 
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
________________________________________________
Message sent using UebiMiau 2.7.10



_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

> -----Original Message-----
> From: xen-users-bounces@lists.xensource.com 
> [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Carlo
> Sent: 21 December 2006 17:20
> To: xen-users@lists.xensource.com
> Subject: RE: [Xen-users] Problem with WinXP install. Can 
> start but not connect via vnc
> 
> Hi, I''ve a problem: I''ve the same config file, xen 3.0.3 
> installed from
> source.
> I can start windows in a domU but I can''t see it with graphic.
> 
> If I type "xm list" I can see it in the list and the time is 
> not 0 (i think
> that a number that is not 0 it''s ok... isn''t it?).
> 
> if I start it with qemu it work fine but without network (in 
> the hardware
> list thereis a network card).
> 
> Here I posted a log of qemu-dm:
> 
> domid: 5
> qemu: the number of cpus is 1
> shared page at pfn:1ffff, mfn: 1c10f
> buffered io page at pfn:1fffd, mfn: 1c111
> False I/O request ... in-service already: 0, pvalid: 0, port: 
> 0, data: 0,
> count:
>  0, size: 0
> 
> 
> And my config file is:
> 
> kernel = "/usr/lib/xen/boot/hvmloader"
> builder = ''hvm''
> memory = 512
> name = "winxp"
> vcpus = 1
> vif = [ '''' ]
> disk = [ ''file:/vserver/images/winxp.img,ioemu:hda,w'' ]
> device_model = ''/usr/lib/xen/bin/qemu-dm''
> cdrom=''/dev/hdd''
> ne2000=0
> boot=''c''
No mention of VNC/SDL at all - you probably can''t rely on the defaults
for any of those being "right" for you...

I find that SDL works better for me than VNC, but that''s probably me
rather than the actual quality of either software product. 

--
Mats
> 
> 
> I''ve installed Windows with qemu but also if I try to install 
> it with xen
> and a blank image file, it doesn''t boot...
> 
> If compiled the kernel with TUN/TAP module, any support for 
> graphic card ad
> IDE/SATA controller (they work fine).
> 
> Any suggestion?
> 
> CPU is Athlon 3800+ X2 with AMD-V, MB is ASUS M2V.
> 
> Thanks
> 
> 
> --------- Original Message --------
> From: Gerhard Possler <gerhard.possler@de.ibm.com>
> To: Benny Pfitzner <pfitzner-lug@gmx.net>
> Cc: xen-users@lists.xensource.com
> Subject: RE: [Xen-users] Problem with WinXP install. Can start but
> not	connect via vnc
> Date: 21/12/06 12:23
> 
> > 
> > Hi Benny,
> > 
> > i''m not sure that vnc ist working with
> > hvm (MS) you do not have in an standard installation an 
> vncserver... but
> > can you ping your guest?
> > 
> > (vnc would run with an Linux hvm guest
> > because you have here in many OS''s an vncserver allready as
default)
> > 
> > you should connect to the guest and
> > not to localhost. I use RDP to connect to my XP session, from Linux
> someting
> > like:
> > 
> > rdesktop -g 1200x1024 -a 24 -k de 10.0.0.2
> > 
> > 10.0.0.2 is my XP guest.
> > 
> > Gerhard
> > 
> > xen-users-bounces@lists.xensource.com wrote on 20.12.2006
> > 18:44:53:
> > 
> > &gt; Am Mittwoch, den 20.12.2006, 18:18 +0100 schrieb 
> Petersson, Mats:
> > &gt; 
> > &gt; Hello,
> > &gt; 
> > &gt; I started the domain again with
&lt;boot=''c''&gt; and a
> I saw a lot
> > of I/O
> > &gt; access. But I still don''t know how to connect via
vnc.
> > &gt; 
> > &gt; Here is my most recent qemu-log:
> > &gt; ****************************************
> > &gt; domid: 8
> > &gt; qemu: the number of cpus is 1
> > &gt; shared page at pfn:bfff, mfn: 2172b
> > &gt; buffered io page at pfn:bffd, mfn: 2172d
> > &gt; False I/O request ... in-service already: 0, pvalid: 
> 0, port: 0,
> data:
> > &gt; 0, count: 0, size: 0
> > &gt; ****************************************
> > &gt; 
> > &gt; And here you can find the last couple of lines in my 
> xend.log-file:
> > &gt; http://pastebin.ca/286417
> > &gt; 
> > &gt; I have a qemu running:
> > &gt; ****************************
> > &gt; pfitzner:/var/log/xen# lsof -i|grep qemu
> > &gt; qemu-dm &nbsp; 14352 &nbsp; &nbsp; &nbsp;
&nbsp;root
> &nbsp; &nbsp;8u
> > &nbsp;IPv4 &nbsp;26087 &nbsp; &nbsp; &nbsp; TCP
> > &gt; localhost.localdomain:5900 (LISTEN)
> > &gt; pfitzner:/var/log/xen# vncviewer localhost:5900
> > &gt; vncviewer: ConnectToTcpAddr: connect: Connection refused
> > &gt; Unable to connect to VNC server
> > &gt; ****************************
> > &gt; 
> > &gt; 
> > &gt; Thank you guys very much.
> > &gt; 
> > &gt; Ben
> > &gt; 
> > &gt; &gt; &nbsp;
> > &gt; &gt; &gt; -----Original Message-----
> > &gt; &gt; &gt; From: xen-users-bounces@lists.xensource.com
> > &gt; &gt; &gt; 
> [mailto:xen-users-bounces@lists.xensource.com] On Behalf
> > Of 
> > &gt; &gt; &gt; Benny Pfitzner
> > &gt; &gt; &gt; Sent: 20 December 2006 17:15
> > &gt; &gt; &gt; To: xen-users@lists.xensource.com
> > &gt; &gt; &gt; Subject: Re: [Xen-users] Problem with WinXP
> install. Can
> > 
> > &gt; &gt; &gt; start but not connect via vnc
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; Am Mittwoch, den 20.12.2006, 16:04 +0000
schrieb Ryan
> Worsley:
> > &gt; &gt; &gt; &gt; Hi Benny,
> > &gt; &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt; Benny Pfitzner wrote:
> > &gt; &gt; &gt; &gt; &gt; Hi,
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt; I run debian etch with
xen
> packages provided by
> > debian. 
> > &gt; &gt; &gt; They are running
> > &gt; &gt; &gt; &gt; &gt; fine.
> > &gt; &gt; &gt; &gt; &gt; Today I tryed to install
Windows
> XP. Here is my
> > config:
> > &gt; &gt; &gt; &gt; &gt; 
> ***********************************************
> > &gt; &gt; &gt; &gt; &gt; kernel >
&quot;/usr/lib/xen-3.0.3-1/boot/hvmloader&quot;
> > &gt; &gt; &gt; &gt; &gt; builder =
''hvm''
> > &gt; &gt; &gt; &gt; &gt; memory = 512
> > &gt; &gt; &gt; &gt; &gt; name =
&quot;winxp&quot;
> > &gt; &gt; &gt; &gt; &gt; vcpus = 1
> > &gt; &gt; &gt; &gt; &gt; vif = [
''type=ioemu, bridge=xenbr0'' ]
> > &gt; &gt; &gt; &gt; &gt; disk = [ 
> > &gt; &gt; &gt; 
>
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w''
> > ]
> > &gt; &gt; &gt; &gt; &gt; device_model =
''/usr/lib/xen/bin/qemu-dm''
> > &gt; &gt; &gt; &gt; &gt;
#cdrom=''/dev/hda''
> > &gt; &gt; &gt; &gt; &gt; 
> cdrom=''/vserver/images/domains/winxp/winxp.iso''
> > &gt; &gt; &gt; &gt; &gt; &nbsp; 
> > &gt; &gt; &gt; &gt; The cdrom= lines had no effect for
me,
> I think they''re
> > 
> > &gt; &gt; &gt; obsolete now or 
> > &gt; &gt; &gt; &gt; something, instead I have a disk
line
> that looks like
> > this;
> > &gt; &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt; disk = [ 
> ''phy:/dev/sys_vg/windows_os,ioemu:hda,w'',
> > 
> > &gt; &gt; &gt; &gt;
>
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r''
> > ]
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; Thank you very much Ryan,
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; you are totally right. They changed it in 
> version 3.0.3.
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; I added vncviewer=1 and sdl=1 to my 
> configfile and started
> > the domain
> > &gt; &gt; &gt; again.
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; Then I automatically I got vncviewer
running my WinXP
> install
> > screen.
> > &gt; &gt; &gt; After formatting the image and so on
Windows
> want''s to
> reboot.
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; Since then I don''t have connection
to the domain.
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; I posted my netstat -l output here because
I
> just can''t
> > find the port:
> > &gt; &gt; &gt; http://pastebin.ca/raw/286397
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; My logs don''t show anything
regarding vnc.
> > &gt; &gt; &gt; Here is the output of the most recent
qemu-log:
> > &gt; &gt; &gt;
*************************************************
> > &gt; &gt; &gt; domid: 7
> > &gt; &gt; &gt; qemu: the number of cpus is 1
> > &gt; &gt; &gt; shared page at pfn:1ffff, mfn: 1d24b
> > &gt; &gt; &gt; buffered io page at pfn:1fffd, mfn: 1d24d
> > &gt; &gt; &gt;
*************************************************
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; Here I posted the last couple of lines from
> the xend.log
> > file.
> > &gt; &gt; &gt; http://pastebin.ca/286403
> > &gt; &gt; 
> > &gt; &gt; I bet you don''t have a qemu-dm process for
some
> reason... Try
> > starting
> > &gt; &gt; the domain from scratch (booting from the 
> hard-disk, not CD-ROM
> > this
> > &gt; &gt; time). 
> > &gt; &gt; 
> > &gt; &gt; If starting it again doesn''t work, can you
show
> the qemu-log
> > from the
> > &gt; &gt; new vm?
> > &gt; &gt; 
> > &gt; &gt; --
> > &gt; &gt; Mats
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; Thanks Ben
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt; &gt; ne2000=0
> > &gt; &gt; &gt; &gt; &gt;
boot=''d''
> > &gt; &gt; &gt; &gt; &gt; vif &nbsp;= [
''ip=192.168.0.205'' ]
> > &gt; &gt; &gt; &gt; &gt; vnc=1
> > &gt; &gt; &gt; &gt; &gt; vncviewer=0
> > &gt; &gt; &gt; &gt; &gt; &nbsp; 
> > &gt; &gt; &gt; &gt; Do you not have to set vncviewer
to 1
> to get it create
> > the 
> > &gt; &gt; &gt; window for 
> > &gt; &gt; &gt; &gt; you? &nbsp;I personally used
SDL
> instead (sdl=1).
> &nbsp;You
> > also say 
> > &gt; &gt; &gt; your domain 
> > &gt; &gt; &gt; &gt; is 17, I think when I experimented
with
> VNC I found
> > it to 
> > &gt; &gt; &gt; create the 
> > &gt; &gt; &gt; &gt; listening port on something like
4017
> or whatever.
> > &nbsp;I used 
> > &gt; &gt; &gt; netstat -l to 
> > &gt; &gt; &gt; &gt; find out what port it was actually
on.
> > &gt; &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt; Ben, lastly, could you check your 
> /var/log/xen folder
> > for error 
> > &gt; &gt; &gt; &gt; messages, specifically check the
most
> recent qemu log.
> > &gt; &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt; Thanks,
> > &gt; &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt; Ryan.
> > &gt; &gt; &gt; &gt; &gt; 
> ***********************************************
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt; When I try to start the
domain it
> seems to run
> > fine:
> > &gt; &gt; &gt; &gt; &gt; 
> ***********************************************
> > &gt; &gt; &gt; &gt; &gt; pfitzner:/etc/xen# xm
create winxp2
> > &gt; &gt; &gt; &gt; &gt; Using config file
&quot;winxp2&quot;.
> > &gt; &gt; &gt; &gt; &gt; Started domain winxp
> > &gt; &gt; &gt; &gt; &gt; 
> ***********************************************
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt; But when I try to connect
to the
> domain via vnc
> > I get the 
> > &gt; &gt; &gt; message that
> > &gt; &gt; &gt; &gt; &gt; the viewer can''t
connect:
> > &gt; &gt; &gt; &gt; &gt; 
> ***********************************************
> > &gt; &gt; &gt; &gt; &gt;
pfitzner:/vserver/images/domains# vncviewer
> pfitzner:17
> > &gt; &gt; &gt; &gt; &gt; vncviewer:
ConnectToTcpAddr:
> connect: Connection
> > refused
> > &gt; &gt; &gt; &gt; &gt; Unable to connect to VNC
server
> > &gt; &gt; &gt; &gt; &gt; 
> ***********************************************
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt; P.S.:
> > &gt; &gt; &gt; &gt; &gt; 17 is the ID of the
domain and I
> have a Intel
> > Pentuim D with VT:
> > &gt; &gt; &gt; &gt; &gt;
pfitzner:/vserver/images/domains#
> xm dmesg | grep
> > VMX
> > &gt; &gt; &gt; &gt; &gt; (XEN) VMXON is done
> > &gt; &gt; &gt; &gt; &gt; (XEN) VMXON is done
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt; Does somebody might have
a idea
> what I did do
> > wrong?
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt; Tanks Ben
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt;
> > &gt; &gt; &gt; &gt; &gt; 
> _______________________________________________
> > &gt; &gt; &gt; &gt; &gt; Xen-users mailing list
> > &gt; &gt; &gt; &gt; &gt;
Xen-users@lists.xensource.com
> > &gt; &gt; &gt; &gt; &gt;
http://lists.xensource.com/xen-users
> > &gt; &gt; &gt; &gt; &gt; &nbsp; 
> > &gt; &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt; 
> > &gt; &gt; &gt; &gt;
_______________________________________________
> > &gt; &gt; &gt; &gt; Xen-users mailing list
> > &gt; &gt; &gt; &gt; Xen-users@lists.xensource.com
> > &gt; &gt; &gt; &gt;
http://lists.xensource.com/xen-users
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt;
_______________________________________________
> > &gt; &gt; &gt; Xen-users mailing list
> > &gt; &gt; &gt; Xen-users@lists.xensource.com
> > &gt; &gt; &gt; http://lists.xensource.com/xen-users
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; 
> > &gt; &gt; &gt; 
> > &gt; &gt; 
> > &gt; 
> > &gt; 
> > &gt; _______________________________________________
> > &gt; Xen-users mailing list
> > &gt; Xen-users@lists.xensource.com
> > &gt; http://lists.xensource.com/xen-users
> > 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@lists.xensource.com
> > http://lists.xensource.com/xen-users
> 
> ________________________________________________
> Message sent using UebiMiau 2.7.10
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
> 
> 
> 


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

I''ve put sdl=1 in the config file but nothing...

How can I I check if it is installed? If not, how can I install it?
I''ve
debian sarge 3.1

Thanks...


--------- Original Message --------
From: Petersson, Mats <Mats.Petersson@amd.com>
To: Carlo <carlo@granisso.it>, xen-users@lists.xensource.com
<xen-users@lists.xensource.com>
Subject: RE: [Xen-users] Problem with WinXP install. Can start but not
connect via vnc
Date: 21/12/06 19:27
>  
> 
> &gt; -----Original Message-----
> &gt; From: xen-users-bounces@lists.xensource.com 
> &gt; [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Carlo
> &gt; Sent: 21 December 2006 17:20
> &gt; To: xen-users@lists.xensource.com
> &gt; Subject: RE: [Xen-users] Problem with WinXP install. Can 
> &gt; start but not connect via vnc
> &gt; 
> &gt; Hi, I''ve a problem: I''ve the same config file,
xen 3.0.3
> &gt; installed from
> &gt; source.
> &gt; I can start windows in a domU but I can''t see it with
graphic.
> &gt; 
> &gt; If I type &quot;xm list&quot; I can see it in the list and
the time
is 
> &gt; not 0 (i think
> &gt; that a number that is not 0 it''s ok... isn''t
it?).
> &gt; 
> &gt; if I start it with qemu it work fine but without network (in 
> &gt; the hardware
> &gt; list thereis a network card).
> &gt; 
> &gt; Here I posted a log of qemu-dm:
> &gt; 
> &gt; domid: 5
> &gt; qemu: the number of cpus is 1
> &gt; shared page at pfn:1ffff, mfn: 1c10f
> &gt; buffered io page at pfn:1fffd, mfn: 1c111
> &gt; False I/O request ... in-service already: 0, pvalid: 0, port: 
> &gt; 0, data: 0,
> &gt; count:
> &gt;  0, size: 0
> &gt; 
> &gt; 
> &gt; And my config file is:
> &gt; 
> &gt; kernel = &quot;/usr/lib/xen/boot/hvmloader&quot;
> &gt; builder = ''hvm''
> &gt; memory = 512
> &gt; name = &quot;winxp&quot;
> &gt; vcpus = 1
> &gt; vif = [ '''' ]
> &gt; disk = [
''file:/vserver/images/winxp.img,ioemu:hda,w'' ]
> &gt; device_model = ''/usr/lib/xen/bin/qemu-dm''
> &gt; cdrom=''/dev/hdd''
> &gt; ne2000=0
> &gt; boot=''c''
> 
> No mention of VNC/SDL at all - you probably can''t rely on the
defaults
> for any of those being &quot;right&quot; for you...
> 
> I find that SDL works better for me than VNC, but that''s probably
me
> rather than the actual quality of either software product. 
> 
> --
> Mats
> &gt; 
> &gt; 
> &gt; I''ve installed Windows with qemu but also if I try to
install
> &gt; it with xen
> &gt; and a blank image file, it doesn''t boot...
> &gt; 
> &gt; If compiled the kernel with TUN/TAP module, any support for 
> &gt; graphic card ad
> &gt; IDE/SATA controller (they work fine).
> &gt; 
> &gt; Any suggestion?
> &gt; 
> &gt; CPU is Athlon 3800+ X2 with AMD-V, MB is ASUS M2V.
> &gt; 
> &gt; Thanks
> &gt; 
> &gt; 
> &gt; --------- Original Message --------
> &gt; From: Gerhard Possler &lt;gerhard.possler@de.ibm.com&gt;
> &gt; To: Benny Pfitzner &lt;pfitzner-lug@gmx.net&gt;
> &gt; Cc: xen-users@lists.xensource.com
> &gt; Subject: RE: [Xen-users] Problem with WinXP install. Can start but
> &gt; not	connect via vnc
> &gt; Date: 21/12/06 12:23
> &gt; 
> &gt; &gt; 
> &gt; &gt; Hi Benny,
> &gt; &gt; 
> &gt; &gt; i''m not sure that vnc ist working with
> &gt; &gt; hvm (MS) you do not have in an standard installation an 
> &gt; vncserver... but
> &gt; &gt; can you ping your guest?
> &gt; &gt; 
> &gt; &gt; (vnc would run with an Linux hvm guest
> &gt; &gt; because you have here in many OS''s an vncserver
allready as
default)
> &gt; &gt; 
> &gt; &gt; you should connect to the guest and
> &gt; &gt; not to localhost. I use RDP to connect to my XP session,
from
Linux
> &gt; someting
> &gt; &gt; like:
> &gt; &gt; 
> &gt; &gt; rdesktop -g 1200x1024 -a 24 -k de 10.0.0.2
> &gt; &gt; 
> &gt; &gt; 10.0.0.2 is my XP guest.
> &gt; &gt; 
> &gt; &gt; Gerhard
> &gt; &gt; 
> &gt; &gt; xen-users-bounces@lists.xensource.com wrote on 20.12.2006
> &gt; &gt; 18:44:53:
> &gt; &gt; 
> &gt; &gt; &amp;gt; Am Mittwoch, den 20.12.2006, 18:18 +0100
schrieb
> &gt; Petersson, Mats:
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; Hello,
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; I started the domain again with
&amp;lt;boot=''c''&amp;gt; and a
> &gt; I saw a lot
> &gt; &gt; of I/O
> &gt; &gt; &amp;gt; access. But I still don''t know how
to connect via vnc.
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; Here is my most recent qemu-log:
> &gt; &gt; &amp;gt; ****************************************
> &gt; &gt; &amp;gt; domid: 8
> &gt; &gt; &amp;gt; qemu: the number of cpus is 1
> &gt; &gt; &amp;gt; shared page at pfn:bfff, mfn: 2172b
> &gt; &gt; &amp;gt; buffered io page at pfn:bffd, mfn: 2172d
> &gt; &gt; &amp;gt; False I/O request ... in-service already: 0,
pvalid:
> &gt; 0, port: 0,
> &gt; data:
> &gt; &gt; &amp;gt; 0, count: 0, size: 0
> &gt; &gt; &amp;gt; ****************************************
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; And here you can find the last couple of
lines in my
> &gt; xend.log-file:
> &gt; &gt; &amp;gt; http://pastebin.ca/286417
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; I have a qemu running:
> &gt; &gt; &amp;gt; ****************************
> &gt; &gt; &amp;gt; pfitzner:/var/log/xen# lsof -i|grep qemu
> &gt; &gt; &amp;gt; qemu-dm &amp;nbsp; 14352 &amp;nbsp;
&amp;nbsp;
&amp;nbsp; &amp;nbsp;root 
> &gt; &amp;nbsp; &amp;nbsp;8u
> &gt; &gt; &amp;nbsp;IPv4 &amp;nbsp;26087 &amp;nbsp;
&amp;nbsp; &amp;nbsp;
TCP
> &gt; &gt; &amp;gt; localhost.localdomain:5900 (LISTEN)
> &gt; &gt; &amp;gt; pfitzner:/var/log/xen# vncviewer
localhost:5900
> &gt; &gt; &amp;gt; vncviewer: ConnectToTcpAddr: connect:
Connection
refused
> &gt; &gt; &amp;gt; Unable to connect to VNC server
> &gt; &gt; &amp;gt; ****************************
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; Thank you guys very much.
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; Ben
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;nbsp;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; -----Original
Message-----
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; From:
xen-users-bounces@lists.xensource.com 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; [mailto:xen-users-bounces@lists.xensource.com] On Behalf
> &gt; &gt; Of 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Benny Pfitzner
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Sent: 20 December
2006 17:15
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; To:
xen-users@lists.xensource.com
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Subject: Re:
[Xen-users] Problem with
WinXP 
> &gt; install. Can
> &gt; &gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; start but not
connect via vnc
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Am Mittwoch, den
20.12.2006, 16:04
+0000 schrieb Ryan
> &gt; Worsley:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; Hi
Benny,
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; Benny
Pfitzner wrote:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; Hi,
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; I run debian etch
with xen 
> &gt; packages provided by
> &gt; &gt; debian. 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; They are running
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; fine.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; Today I tryed to
install Windows 
> &gt; XP. Here is my
> &gt; &gt; config:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; ***********************************************
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; kernel > &gt;
&amp;quot;/usr/lib/xen-3.0.3-1/boot/hvmloader&amp;quot;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; builder = ''hvm''
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; memory = 512
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; name &amp;quot;winxp&amp;quot;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; vcpus = 1
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; vif = [
''type=ioemu, bridge=xenbr0'' ]
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; disk = [
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt;
''file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w''
> &gt; &gt; ]
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; device_model ''/usr/lib/xen/bin/qemu-dm''
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; #cdrom=''/dev/hda''
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; cdrom=''/vserver/images/domains/winxp/winxp.iso''
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; &amp;nbsp;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; The
cdrom= lines had no
effect for me, 
> &gt; I think they''re
> &gt; &gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; obsolete now or 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
something, instead I have a
disk line 
> &gt; that looks like
> &gt; &gt; this;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; disk
= [
> &gt; ''phy:/dev/sys_vg/windows_os,ioemu:hda,w'',
> &gt; &gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
> &gt;
''file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r''
> &gt; &gt; ]
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Thank you very
much Ryan,
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; you are totally
right. They changed
it in 
> &gt; version 3.0.3.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; I added
vncviewer=1 and sdl=1 to my
> &gt; configfile and started
> &gt; &gt; the domain
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; again.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Then I
automatically I got vncviewer
running my WinXP
> &gt; install
> &gt; &gt; screen.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; After formatting
the image and so on
Windows 
> &gt; want''s to
> &gt; reboot.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Since then I
don''t have connection to
the domain.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; I posted my
netstat -l output here
because I 
> &gt; just can''t
> &gt; &gt; find the port:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt;
http://pastebin.ca/raw/286397
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; My logs
don''t show anything regarding
vnc.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Here is the output
of the most recent
qemu-log:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt;
*************************************************
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; domid: 7
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; qemu: the number
of cpus is 1
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; shared page at
pfn:1ffff, mfn: 1d24b
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; buffered io page
at pfn:1fffd, mfn:
1d24d
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt;
*************************************************
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Here I posted the
last couple of
lines from 
> &gt; the xend.log
> &gt; &gt; file.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt;
http://pastebin.ca/286403
> &gt; &gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; I bet you don''t have a
qemu-dm process for
some 
> &gt; reason... Try
> &gt; &gt; starting
> &gt; &gt; &amp;gt; &amp;gt; the domain from scratch
(booting from the
> &gt; hard-disk, not CD-ROM
> &gt; &gt; this
> &gt; &gt; &amp;gt; &amp;gt; time). 
> &gt; &gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; If starting it again
doesn''t work, can you
show 
> &gt; the qemu-log
> &gt; &gt; from the
> &gt; &gt; &amp;gt; &amp;gt; new vm?
> &gt; &gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; --
> &gt; &gt; &amp;gt; &amp;gt; Mats
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Thanks Ben
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; ne2000=0
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; boot=''d''
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; vif &amp;nbsp;= [
''ip=192.168.0.205'' ]
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; vnc=1
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; vncviewer=0
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; &amp;nbsp;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; Do
you not have to set
vncviewer to 1 
> &gt; to get it create
> &gt; &gt; the 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; window for 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; you?
&amp;nbsp;I personally
used SDL 
> &gt; instead (sdl=1).
> &gt; &amp;nbsp;You
> &gt; &gt; also say 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; your domain 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; is
17, I think when I
experimented with 
> &gt; VNC I found
> &gt; &gt; it to 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; create the 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
listening port on something
like 4017 
> &gt; or whatever.
> &gt; &gt; &amp;nbsp;I used 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; netstat -l to 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; find
out what port it was
actually on.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; Ben,
lastly, could you check
your 
> &gt; /var/log/xen folder
> &gt; &gt; for error 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
messages, specifically check
the most 
> &gt; recent qemu log.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
Thanks,
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; Ryan.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; ***********************************************
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; When I try to start
the domain it 
> &gt; seems to run
> &gt; &gt; fine:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; ***********************************************
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; pfitzner:/etc/xen#
xm create winxp2 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; Using config file
&amp;quot;winxp2&amp;quot;.
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; Started domain
winxp
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; ***********************************************
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; But when I try to
connect to the 
> &gt; domain via vnc
> &gt; &gt; I get the 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; message that
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; the viewer can''t
connect:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; ***********************************************
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
pfitzner:/vserver/images/domains# vncviewer
> &gt; pfitzner:17
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; vncviewer:
ConnectToTcpAddr: 
> &gt; connect: Connection
> &gt; &gt; refused
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; Unable to connect
to VNC server
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; ***********************************************
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; P.S.:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; 17 is the ID of the
domain and I 
> &gt; have a Intel
> &gt; &gt; Pentuim D with VT:
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
pfitzner:/vserver/images/domains# 
> &gt; xm dmesg | grep
> &gt; &gt; VMX
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; (XEN) VMXON is done
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; (XEN) VMXON is done
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; Does somebody might
have a idea 
> &gt; what I did do
> &gt; &gt; wrong?
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; Tanks Ben
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
> &gt; _______________________________________________
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; Xen-users mailing
list
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
Xen-users@lists.xensource.com
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt;
http://lists.xensource.com/xen-users
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
&amp;gt; &amp;nbsp;
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
_______________________________________________
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
Xen-users mailing list
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
Xen-users@lists.xensource.com
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; &amp;gt;
http://lists.xensource.com/xen-users
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt;
_______________________________________________
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; Xen-users mailing
list
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt;
Xen-users@lists.xensource.com
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt;
http://lists.xensource.com/xen-users
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; &amp;gt; 
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt; 
> &gt; &gt; &amp;gt;
_______________________________________________
> &gt; &gt; &amp;gt; Xen-users mailing list
> &gt; &gt; &amp;gt; Xen-users@lists.xensource.com
> &gt; &gt; &amp;gt; http://lists.xensource.com/xen-users
> &gt; &gt; 
> &gt; &gt; 
> &gt; &gt; 
> &gt; &gt; 
> &gt; &gt; 
> &gt; &gt; _______________________________________________
> &gt; &gt; Xen-users mailing list
> &gt; &gt; Xen-users@lists.xensource.com
> &gt; &gt; http://lists.xensource.com/xen-users
> &gt; 
> &gt; ________________________________________________
> &gt; Message sent using UebiMiau 2.7.10
> &gt; 
> &gt; 
> &gt; 
> &gt; _______________________________________________
> &gt; Xen-users mailing list
> &gt; Xen-users@lists.xensource.com
> &gt; http://lists.xensource.com/xen-users
> &gt; 
> &gt; 
> &gt; 
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
> 
> 
________________________________________________
Message sent using UebiMiau 2.7.10



_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users