I believe xen-unstable branch has a fix that will keep network working on
systems
without ifup/ifdown (gentoo) when you start xend.
http://xenbits.xensource.com/xen-unstable.hg?cmd=changeset;node=fbee8d9fbabae6a7a966a49f9fc4104e4fd9d97a
Adam Wendt
IPCoast, Inc.
On Tue, 17 Jan 2006 12:07 , ''Nick Couchman''
<Nick.Couchman@seakr.com> sent:
>More issues with XEN networking. Basically I''m running Xen 3.0
under Gentoo.
When Xend starts and configures the bridge, I lose network connectivity. I have
an Intel ProV100 network card, eth0. Xen creates the "peth0" as the
physical
network card and also creates vif0.0 and xenbr0 for the bridge. The interfaces
vif0.0 and xenbr0 get added to the bridge successfully. The IP address is still
assigned to the "eth0" device, but the machine is unable to talk to
anything on
the network. Pinging it''s own IP address works, but pinging any
machine -
whether or the same subnet or a different one fails.>
>Is there anything special or specific I need to do to get this working?
>
>Thanks,
>
>
>Nick Couchman
>Systems Integrator
>SEAKR Engineering, Inc.
>6221 South Racine Circle
>Centennial, CO 80111
>Main: (303) 790-8499
>Fax: (303) 790-8720
>Web: http://www.seakr.com
>
>
>
>_______________________________________________
>Xen-users mailing list
>Xen-users@lists.xensource.com
>http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users