AMIT KUMAR
2005-Dec-30 06:33 UTC
[Xen-users] Problem while booting dom0 in FC4 for Xen-2.0
hi , Booting process hangs after giving following warning , "Current emulating unsupported memory access in /lib/tls libraries. The emulation is very slow . To ensure full performance you should execute mv /lib/tls /lib/tils.disabled" This warning comes even after performing ''mv ''. Following is grub config: # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,1) # kernel /vmlinuz-version ro root=/dev/sda3 # initrd /initrd-version.img #boot=/dev/sda default=0 timeout=20 splashimage=(hd0,1)/grub/splash.xpm.gz #hiddenmenu title Fedora Core (2.6.11-1.1369_FC4smp) root (hd0,1) kernel /vmlinuz-2.6.11-1.1369_FC4smp ro root=LABEL=/ rhgb quiet initrd /initrd-2.6.11-1.1369_FC4smp.img title Xen 2.0 / XenLinux 2.6 root(hd0,1) kernel /xen-2.0.7.gz dom0_mem=720000 module /vmlinuz-2.6.11.12-xen0 root=/dev/sda3 ro console=tty0 Following is the output of fdisk -l Device Boot Start End Blocks Id System /dev/sda1 * 1 5099 40957686 7 HPFS/NTFS /dev/sda2 5100 5112 104422+ 83 Linux /dev/sda3 5113 9474 35037765 83 Linux /dev/sda4 9475 9729 2048287+ 5 Extended /dev/sda5 9475 9729 2048256 82 Linux swap / Solaris Xen-3.0 gives problem of Insufficient memory for dom0. I have been successfully running Xen-2.0 with RHEL-3 kernel-2.4.20 with dom0 as 2.6.11.12. Is this problem with FC4 ? Any help in this regard will be greatly appreciated. Thanks and Regards, Amit Kumar _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Steven Anderson
2005-Dec-30 15:13 UTC
[Xen-users] Problem while booting dom0 in FC4 for Xen-2.0
Greetings! I am looking at your config and notice that your kernel and xen are not located in /boot directory also you are using over 512mb ram for dom0...I have never used ovver 512 and wonder if there might be a limit..just a thought? I run 3.0 version of xen this is your config: title Xen 2.0 / XenLinux 2.6 root(hd0,1) kernel /xen-2.0.7.gz dom0_mem=720000 module /vmlinuz-2.6.11.12-xen0 root=/dev/sda3 ro console=tty0 Here is my working config: title Fedora Core (2.6.12.6-xen3_7.1_fc4) root (hd0,0) kernel /boot/xen.gz dom0_mem=256000 module /boot/vmlinuz-2.6.12.6-xen3_7.1_fc4 ro root=LABEL=/ rhgb module /boot/initrd-2.6.12.6-xen3_7.1_fc4.img notice i am running from boot directory (you get a message about it expecting it in boot) Also i am running an initrd image never tried it without one but i understand its possible..just somthing to think about. Thats the best i can do to help you out with my limited knowledge. Good luck and let me know if one of these suggestions fixes your problems! Regards, Steven Anderson Happy New Year! --------------------------------- Yahoo! for Good - Make a difference this year. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users