Hi, I use the Xen has some time, however never I obtained very well to understand the functioning of bridges. To create bridge, always I used the concept of the QEmu using the tool "tunctl": /usr/bin/tunctl - t tun0 - u 0 /sbin/ifconfig tun0 172.20.0.1 up. Perhaps this is not the correct form to make bridge, and would like the aid of this list to understand. My problem is following: When I have a VPN for example, necessary is clearly of a classroom of different IP, correct? Therefore use "tun" together with the other interfaces. It follows them: Eth0: 200.123.0.1/255.255.255.128 = Dedicated Link (Nat redirect...); Eth1: 192.168.0.1/255.255.255.0 = Intranet Server (SMB...); Tun0: 172.20.0.1/255.255.0.0 = WebServer (HTTP...). This scene until functions when the serving Intranet wheel in proper firewall (Domain0), but now I want to inside execute it of one another virtual machine using another classroom of IP (finding I that this would be most correct). The problem is that, if I configure an interface in "/etc/xen/scripts/network-bridge" all the virtual machines, will go to use this, correct? Without speaking that, when I configure "network-bridge" to use an interface as "eth1" for example, I lose the remote access to server/IP from internal network (intranet). - How I would make an ideal scene for this? Grateful, -- Leonardo Pinto listas#openlogic dot com br ________________________________________________ Mensagem enviada usando OpenLogic WebMail 2.7.2 _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users