hi,
i solved theproblem myself.
all to do is a "export ARCH=xen" before compiling the driver.
Now everthing is fine.
regards rene
Rene wrote:
>Hi list.
>
>I successfully comlied my own Dom0-Kernel with capi-support and use it in
>test-domU fot getting my isdn-card to work in it.
>I have compiled the driver from ftp.avm.de .
>In lspci i can see my card.
>I use xen-2.0.7 from source.
>
>If i try to start it i get the following error :
>
>fcpci: module license ''Proprietary'' taints kernel.
>fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2
>fcpci: (fcpci built on Dec 16 2005 at 07:09:12)
>PCI: Obtained IRQ 23 for device 0000:02:0b.0
>fcpci: AVM FRITZ!Card PCI found: port 0xdf80, irq 23
>fcpci: Loading...
>fcpci: Driver ''fcpci'' attached to stack. (152)
>general protection fault: 0000 [#1]
>PREEMPT
>Modules linked in: fcpci
>CPU: 0
>EIP: 0061:[<c292c4ab>] Tainted: P VLI
>EFLAGS: 00010246 (2.6.11.12-xen0-rema)
>EIP is at enter_critical+0xb/0x20 [fcpci]
>eax: 00000246 ebx: c1972004 ecx: 00001200 edx: c1972004
>esi: c2951edc edi: c0024c00 ebp: c079fe20 esp: c079fe14
>ds: 007b es: 007b ss: 0069
>Process modprobe (pid: 987, threadinfo=c079e000 task=c07aba80)
>Stack: c28de18e 00001200 00000000 00000000 c28e1c3f c197201c 000000bf
>c28e133e
> c2951edc c1972004 c1fa8a04 c1fa8a58 c28e1ddc c1fec004 000032c8
>00000001
> c292c71c c2950e60 c292c562 c1fa8a04 c1fa8a58 c292cc7d c1fa8a04
>c2950da0
>Call Trace:
> [<c28de18e>] EnterCritical+0xe/0x10 [fcpci]
> [<c28e1c3f>] _LI_AddTop+0xf/0x40 [fcpci]
> [<c28e133e>] QUEUE_Init+0x7e/0x90 [fcpci]
> [<c28e1ddc>] CM_Start+0x3c/0x80 [fcpci]
> [<c292c71c>] start+0x3c/0xc0 [fcpci]
> [<c292c562>] params_ok+0x42/0x60 [fcpci]
> [<c292cc7d>] add_card+0x9d/0x1b0 [fcpci]
> [<c292f16f>] link_library+0xf/0x20 [fcpci]
> [<c292c1ac>] fritz_probe+0x7c/0x130 [fcpci]
> [<c0204ef0>] kobject_hotplug+0x270/0x300
> [<c02108b2>] pci_device_probe_static+0x52/0x70
> [<c021090c>] __pci_device_probe+0x3c/0x50
> [<c021094c>] pci_device_probe+0x2c/0x50
> [<c02316bf>] driver_probe_device+0x2f/0x80
> [<c023180c>] driver_attach+0x5c/0xa0
> [<c0231d5d>] bus_add_driver+0x9d/0xd0
> [<c023237f>] driver_register+0x2f/0x40
> [<c0210bc4>] pci_register_driver+0x64/0x90
> [<c295a0ba>] fritz_init+0xba/0x116 [fcpci]
> [<c01342a3>] sys_init_module+0x183/0x240
> [<c0109268>] syscall_call+0x7/0xb
>Code: 0b 01 ca 89 14 24 e8 65 25 fb ff 01 03 8b 5c 24 0c 83 c4 10 c3 8d 74
>26 00 8d bc 27 00 00 00 00 a1 d0 7e 95 c2 85 c0 75 08 9c 58 <fa> a3 30
7f
>95 c2 ff 05 d0 7e 95 c2 c3 90 8d b4 26 00 00 00 00
>
>can you give me any hints please.
>
>kind regards
>rene
>
>
>_______________________________________________
>Xen-users mailing list
>Xen-users@lists.xensource.com
>http://lists.xensource.com/xen-users
>
>
>
>
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users