Hello all!
I have a problem to understand networking in Xen. I have set up two virtual
domains (called domain1 and domain2) in dom0 (called domain0). But I still
don''t have a connection between domain1 and 2!
domain0 should only simulating a network without connections to any other
networks and so there is no eth0 in domain0 and also no virtual network
connections to domain1 or 2. It should be like this:
Domain0
+--------------------------+
| |
| +-------+ +-------+ |
| |Domain1|~~~~|Domain2| |
| +-------+ +-------+ |
| |
+--------------------------+
So, my question is which config-files are to be edited and how (network-route,
vif-bridge, vif-route, ...)? Is there any good tutorial?
Here are the config-files of my domain0, 1 and 2 which I have edited. Any other
config-files are still how they''ve been installed:
Domain0:
--------
/etc/network/interfaces:
auto lo
iface lo inet loopback
address 127.0.0.0
netmask 255.0.0.0
Domain1:
--------
/etc/xen/domain1.sxp:
...
# network
nics = 1
/etc/network/interfaces:
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0
auto eth0
iface eth0 inet static
address 192.168.0.2
netmask 255.255.255.0
Domain2:
--------
/etc/xen/domain2.sxp:
...
# network
nics = 1
/etc/network/interfaces:
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0
auto eth0
iface eth0 inet static
address 192.168.0.1
netmask 255.255.255.0
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users