Xen users - Dec 2005 - need help to set up networking

Hi
 I''m new to Xen. I''ve read the doc and browse the archives but
I could not find a solution to my problem:
 
 I would like my domains to see the network my host is connected to.
 
 my config :
 - I copied ttylinux-xen from the xen examples to ttylinux-xenM1 and
ttylinux-xenM2.
 - I created a configM1 file similar to the one given in section 3.3 of the doc
:
 kernel = "/boot/vmlinuz-2.6-xenU"
 memory = 64
 name = "ttylinuxM1"
 nics=1
 ip = "192.168.123.1"
 disk = [
''file:/home/codato/Xen/Ttylinux/ttylinux-xenM1,sda1,w'' ]
 root = "/dev/sda1 ro"
 - I created a config M2 file similar except M1 is M2 and IP address is
192.168.123.2
 - I start xend
 - I create domain M1: xm create configM1 -c
 - I create domain M2: xm create configM2 -c
 
 From domain M1, I can ping 192.168.123.2. But how can I communicate with the
host or the network my host is connected to?
 
 On the host, I''ve try to add "route add 192.168.123.1 dev
vif7.0" but it complains this interface does not exist (yet it is listed by
ifconfig -a).
 
 I hope someone could help me or point me to usefull resources.
 Thank you
 
 Virginie Codato
 
		
---------------------------------
 Yahoo! Personals
 Skip the bars and set-ups and start using Yahoo! Personals for free

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users

virginie codato wrote:
>  From domain M1, I can ping 192.168.123.2. But how can I communicate with
the host or
> the netw ork my host is connected to?

I''ve got a gateway parm in the config file (and a netmask one). Mind
you, my 2nd level systems are also set up with an appropriate gateway
and netmask.

As for the interfaces: they just work - xen 2.0.7/kernel 2.6.11.12
(luckily this one
works on this box - newer kernels seem to hang it!)

Rod

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users